journal article·2021-11

Achieving additive-free organic solar cells by modulating the side-chain length of non-fullerene small molecule acceptors

Yue Xin, Jionghong Liang, Yu Zhong, Tianlong Liang, Chi Zhang, Xin He

Dyes and Pigments· Volume 195
Publisher page

Abstract

Abstract After several years of development, the power conversion efficiencies (PCEs) of organic solar cells (OSCs) based on non-fullerene small molecule acceptors (NF-SMAs) can be more than 17 %. However, the addition of solvent additives, which could lead to complicated device processing and poor repeatability, is often the premise of obtaining high PCEs. Here, the impact of the side-chain length and solvent additives on device performance were investigated by synthesizing three NF-SMAs based on dithieno[3,2-b:2′,3′-d]pyrrole with 2-ethylhexyl (SNC2C4–F), 2-butyloctyl (SNC4C6–F) and 2-hexyldecyl (SNC6C8–F) attached to the N atom. The results showed that the acceptors with longer alkyl side chains were less likely to aggregate in the as-cast active layers. Consequently, the device based on SNC4C6–F, exhibiting the most suitable phase separation and morphology, demonstrated an ideal PCE of 10.71 %, which was higher than that of the other two systems. However, after being treated with 1-chloronaphthalene (1-CN), the morphologies of the active layers based on SNC2C4–F and SNC6C8–F were improved, and the corresponding devices also displayed increased PCEs (>10 %). On the other hand, the SNC4C6–F-based active layer treated with 1-CN showed a deteriorated morphology, leading to a reduced PCE. The findings of this work suggested that adjusting the length of alkyl side chains could achieve the optimal PCEs without additional additive treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
2. A history and perspective of non-fullerene electron acceptors for organic solar cells10.1002/aenm.202003570 ↗
3. A–D–A small molecule acceptors with ladder-type arenes for organic solar cells10.1039/C8TA02534G ↗
4. The role of Y6 as the third component in fullerene-free ternary organic photovoltaics10.1016/j.dyepig.2020.108613 ↗
5. PDI derivatives with functional active position as non-fullerene small molecule acceptors in organic solar cells: from different core linker to various conformation
6. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
7. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
8. Mapping polymer donors toward high-efficiency fullerene free organic solar cells10.1002/adma.201604155 ↗
9. A rhodanine flanked nonfullerene acceptor for solution-processed organic photovoltaics10.1021/ja5110602 ↗
10. Naphthobistriazole-based wide bandgap donor polymers for efficient non-fullerene organic solar cells: significant fine-tuning absorption and energy level by backbone fluorination10.1016/j.nanoen.2018.08.059 ↗
11. Achieving 17.4% efficiency of ternary organic photovoltaics with two well-compatible nonfullerene acceptors for minimizing energy loss10.1002/aenm.202001404 ↗
12. Solution-processed polymer solar cells with over 17% efficiency enabled by an iridium complexation approach10.1002/aenm.202000590 ↗
13. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
14. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
15. Near-infrared absorbing non-fullerene acceptors with selenophene as π bridges for efficient organic solar cells10.1039/C8TA00783G ↗
16. Introducing cyclic alkyl chains into small-molecule acceptors for efficient polymer solar cells10.1039/C8TC01780H ↗
17. Utilizing an electron-deficient thieno[3,4-c]pyrrole-4,6-dione (TPD) unit as a π-bridge to improve the photovoltaic performance of A–π–D–π–A type acceptors10.1039/D0TC04601A ↗
18. Vinylene π-bridge: A simple building block for ultra-narrow bandgap nonfullerene acceptors enable 14.2% efficiency in binary organic solar cells10.1016/j.dyepig.2021.109171 ↗
19. Molecular engineering and morphology control of polythiophene:nonfullerene acceptor blends for high-performance solar cells10.1002/aenm.202002572 ↗
20. Solvent additives: key morphology‐directing agents for solution‐processed organic solar cells10.1002/adma.201707114 ↗
21. Recent developments in the optimization of the bulk heterojunction morphology of polymer: fullerene solar cells10.3390/ma11122560 ↗
22. Additive-free non-fullerene organic solar cells10.1002/celc.201901422 ↗
23. Enhancing performance of non-fullerene organic solar cells via side chain engineering of fused-ring electron acceptors10.1016/j.dyepig.2016.12.065 ↗
24. Side-chain impact on molecular orientation of organic semiconductor acceptors: high performance nonfullerene polymer solar cells with thick active layer over 400 nm10.1002/aenm.201800856 ↗
25. Short-axis substitution approach on ladder-type benzodithiophene-based electron acceptor toward highly efficient organic solar cells10.1007/s11426-018-9275-6 ↗
26. Modulating morphology via side-chain engineering of fused ring electron acceptors for high performance organic solar cells10.1007/s11426-019-9453-7 ↗
27. Effect of non-fullerene acceptors' side chains on the morphology and photovoltaic performance of organic solar cells10.1021/acsami.7b09915 ↗
28. Understanding the side-chain effects on A–D–A acceptors: in-plane and out-of-plane10.1039/C8QM00238J ↗
29. Enhancing indacenodithiophene acceptor crystallinity via substituent manipulation increases organic solar cell efficiency10.1021/acs.chemmater.7b04616 ↗
30. Enhancing thermal stability of nonfullerene organic solar cells via fluoro-side-chain engineering10.1039/C9TC02700A ↗
31. An alkylated indacenodithieno[3,2‐b]thiophene‐based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
32. High-performance fullerene-free polymer solar cells with solution-processed conjugated polymers as anode interfacial layer10.1007/s10118-017-1888-7 ↗
33. High-efficiency all-small-molecule organic solar cells based on an organic molecule donor with alkylsilyl-thienyl conjugated side chains10.1002/adma.201706361 ↗
34. Design of a new fused-ring electron acceptor with excellent compatibility to wide-bandgap polymer donors for high-performance organic photovoltaics10.1002/adma.201800403 ↗
35. Enhancing the performance of organic solar cells by hierarchically supramolecular self-assembly of fused-ring electron acceptors10.1021/acs.chemmater.8b01319 ↗
36. A novel thiophene-fused ending group enabling an excellent small molecule acceptor for high-performance fullerene-free polymer solar cells with 11.8% efficiency10.1002/solr.201700044 ↗
37. Significantly increasing the power conversion efficiency by controlling the orientation of nonfullerene small molecular acceptors via side chain engineering10.1002/solr.202000234 ↗
38. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
39. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
40. Alkyl chain length effects of polymer donors on the morphology and device performance of polymer solar cells with different acceptors10.1002/aenm.201901740 ↗