journal article·2021-06

D-(π-A)3 type low bandgap star-shaped fused-ring electron acceptor with alkoxy-substituted thiophene as π-bridge

Tong Wang, Weijie Wang, Xiaofu Wu, Hui Tong, Lixiang Wang

Dyes and Pigments· Volume 190
Publisher page

Abstract

Abstract As a strong electron-donating π-bridge, alkoxy-substituted thiophene has been widely used in low bandgap fused-ring electron acceptors (FREAs), while its application in star-shaped FREAs has never been explored. Herein, a donor-(π-acceptor)3 type low bandgap star-shaped FREA with ethylhexyloxy-thiophene π-bridge, namely TITT-OT-ICF, is synthesized. The enhanced intramolecular charge transfer of TITT-OT-ICF leads to a high-lying HOMO level, and thus a narrower optical band gap of 1.47 eV relative to its counterpart TITT-T-ICF with ethylhexyl-thiophene as π-bridge (1.61 eV). When blending with a wide bandgap polymer donor PBDB-T, EQE spectrum of TITT-OT–ICF–based organic solar cell (OSC) device is extended to 880 nm, while that of PBDB-T: TITT-T–ICF–based device is limited to 800 nm. In spite of similar phase morphologies in both active layers, the broader photoresponse of PBDB-T: TITT-OT–ICF–based device leads to a higher short-circuit current density (JSC) of 16.95 mA cm−2, yielding a higher power conversion efficiency (PCE) of 8.23% in comparison with PBDB-T: TITT-T–ICF–based device (JSC = 14.33 mA cm−2, PCE = 7.53%). These results demonstrate a rational design of low bandgap star-shaped FREAs based on alkoxy-substituted thiophene as the π-bridge for achieving relatively high JSC and PCE.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
2. Fused-ring electron acceptors in China10.1007/s11426-020-9790-9 ↗
3. Recent advances, design guidelines, and prospects of all-polymer solar cells10.1021/acs.chemrev.9b00044 ↗
4. Research progress of tandem organic solar cells10.6023/A20020032 ↗
5. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
6. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
7. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
8. Facile synthesis of polycyclic aromatic hydrocarbon (PAH)-based acceptors with fine-tuned optoelectronic properties: toward efficient additive-free nonfullerene organic solar cells10.1002/aenm.201803976 ↗
9. A-D-A small molecule acceptors with ladder-type arenes for organic solar cells10.1039/C8TA02534G ↗
10. Molecular engineering of central fused-ring cores of non-fullerene acceptors for high-efficiency organic solar cells10.1039/C8TA12465E ↗
11. n-Type molecular photovoltaic materials: design strategies and device applications10.1021/jacs.0c04084 ↗
12. 26 mA cm-2 JSC from organic solar cells with a low-bandgap nonfullerene acceptor10.1016/j.scib.2017.10.017 ↗
13. Terthieno[3,2-b]thiophene (6T) based low bandgap fused-ring electron acceptor for highly efficient solar cells with a high short-circuit current density and low open-circuit voltage loss10.1002/aenm.201702831 ↗
14. Trifluoromethylation enables a 3D interpenetrated low-band-gap acceptor for efficient organic solar cells10.1016/j.joule.2020.02.004 ↗
15. Enhancing the performance of polymer solar cells via core engineering of NIR-absorbing electron acceptors10.1002/adma.201706571 ↗
16. Dithieno[3,2-b:2′,3′-d]pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells10.1002/adma.201707150 ↗
17. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
18. Breaking 10% efficiency in semitransparent solar cells with fused-undecacyclic electron acceptor10.1021/acs.chemmater.7b04251 ↗
19. Nonfullerene acceptors from thieno[3,2-b]thiophene-fused naphthalene donor core with six-member-ring connection for efficient organic solar cells10.1016/j.dyepig.2020.108892 ↗
20. An electron acceptor with broad visible-NIR absorption and unique solid state packing for as-cast high performance binary organic solar cells10.1002/adfm.201802324 ↗
21. Insertion of double bond π-bridges of A-D-A acceptors for high performance near-infrared polymer solar cells10.1039/C7TA07049G ↗
22. A thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
23. High-efficiency as-cast organic solar cells based on acceptors with steric hindrance induced planar terminal group10.1002/aenm.201901280 ↗
24. Effects of oligothiophene π-bridge length on physical and photovoltaic properties of star-shaped molecules for bulk heterojunction solar cells10.1039/C4TA01933D ↗
25. Dihydropyreno[1,2-b:6,7-b′]dithiophene based electron acceptors for high efficiency as-cast organic solar cells10.1039/C9TA00614A ↗
26. Near-infrared absorbing non-fullerene acceptors with selenophene as π bridges for efficient organic solar cells10.1039/C8TA00783G ↗
27. Efficient semitransparent solar cells with high NIR responsiveness enabled by a small-bandgap electron acceptor10.1002/adma.201606574 ↗
28. Extended conjugation length of nonfullerene acceptors with improved planarity via noncovalent interactions for high-performance organic solar cells10.1002/aenm.201801618 ↗
29. Unique energy alignments of a ternary material system toward high-performance organic photovoltaics10.1002/adma.201801501 ↗
30. Unifying charge generation, recombination, and extraction in low-offset non-fullerene acceptor organic solar cells10.1002/aenm.202001203 ↗
31. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
32. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
33. Efficient semitransparent organic solar cells with tunable color enabled by an ultralow-bandgap nonfullerene acceptor10.1002/adma.201703080 ↗
34. Bandgap narrowing in non-fullerene acceptors: single atom substitution leads to high optoelectronic response beyond 1000 nm10.1002/aenm.201801212 ↗
35. Simultaneous enhancement of three parameters of P3HT-based organic solar cells with one oxygen atom10.1002/aenm.201803012 ↗
36. A naphthodithiophene-based nonfullerene acceptor for high-performance polymer solar cells with a small energy loss10.1039/D0TC00270D ↗
37. Enhancing the performance of organic solar cells by hierarchically supramolecular self-assembly of fused-ring electron acceptors10.1021/acs.chemmater.8b01319 ↗
38. Star-shaped non-fullerene small acceptors for organic solar cells10.1002/cssc.201901013 ↗
39. Exploring overall photoelectric applications by organic materials containing symmetric donor isomers10.1021/acs.chemmater.9b02715 ↗
40. Comparison of linear- and star-shaped fused-ring electron acceptors10.1021/acsmaterialslett.9b00253 ↗
41. An efficient star-shaped fused-ring electron acceptor with C3h-symmetric core via thieno[3,2-b]thiophene extending conjugation strategy10.1039/D0QM00514B ↗
42. Star-shaped and fused electron acceptors based on C3h-symmetric coplanar trindeno[1, 2-b: 4, 5-b′: 7, 8-b′′]trithiophene core for non-fullerene solar cells10.1002/chem.201804554 ↗
43. Star-shaped electron acceptors containing a truxene core for non-fullerene solar cells10.1016/j.orgel.2017.10.009 ↗
44. Wide bandgap molecular acceptors with a truxene core for efficient nonfullerene polymer solar cells: linkage position on molecular configuration and photovoltaic properties10.1002/adfm.201707493 ↗
45. Ring fusion in tetrathienylethene cored perylene diimide tetramers affords acceptors with strong and broad absorption in the near-UV to visible region10.1039/D0TC04110F ↗
46. Star-shaped fused-ring electron acceptors with a C3h-symmetric and electron-rich benzotri(cyclopentadithiophene) core for efficient nonfullerene organic solar cells10.1021/acsami.9b08017 ↗
47. Origin of the light intensity dependence of the short-circuit current of polymer/fullerene solar cells10.1063/1.2130396 ↗
48. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
49. High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes10.1038/ncomms8327 ↗
50. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
51. Simple-structured NIR-absorbing small-molecule acceptors with a thiazolothiazole core: multiple noncovalent conformational locks and D–A effect for efficient OSCs10.1021/acsami.9b16686 ↗