journal article·2021-02

Benzo[c][1,2,5]thiadiazole-fused pentacyclic small molecule acceptors for organic solar cells

Ruijie Ming, Jinhua Gao, Wei Gao, Weimin Ning, Zhenghui Luo, Fujun Zhang, Chuluo Yang

Dyes and Pigments· Volume 185
Publisher page

Abstract

Abstract Recently, A-DA′D-A-type small molecular acceptors (SMAs) with benzo [c][1,2,5]thiadiazole (BT)-fused central cores have shown tremendous progress in organic solar cells (OSCs). In this work, two new BT-fused pentacyclic core based SMAs, namely BTT-4F and BTTCN-Cl, were designed and synthesized. Compared to BTT-4F, BTTCN-Cl not only delivers a reduced bandgap but an elevated lowest unoccupied molecular orbital (LUMO) energy level, which leads to a higher open-circuit voltage (VOC) and thus a lower energy loss in PM6:BTTCN-Cl-based device. However, PM6:BTT-4F-based OSCs achieves a significantly higher power conversion efficiency (PCE) (10.03%) than that of BTTCN-Cl-based OSCs (6.56%) due to its higher short-circuit density (JSC) and fill factor (FF). More favorable morphology accompanying with higher and more balanced hole/electron mobilities was obtained in PM6:BTT-4F active layer, which well accounts for the high PCE in BTT-4F-based OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
2. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
3. Luo Z, Liu T, Yan H, Zou Y, Yang C. Isomerization Strategy of Nonfullerene Small-Molecule Acceptors for Organic Solar Cells. Adv Funct Mater https://doi.org/10.1002/adfm.202004477.10.1002/adfm.202004477 ↗
4. Achieving balanced charge transport and favorable blend morphology in non-fullerene solar cells via acceptor end group modification10.1021/acs.chemmater.8b05327 ↗
5. A novel thiophene-fused ending group enabling an excellent small molecule acceptor for high-performance fullerene-free polymer solar cells with 11.8% efficiency10.1002/solr.201700044 ↗
6. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
7. Reduced energy loss enabled by a chlorinated thiophene-fused ending-group small molecular acceptor for efficient nonfullerene organic solar cells with 13.6% efficiency10.1002/aenm.201900041 ↗
8. New anthracene-fused nonfullerene acceptors for high-efficiency organic solar cells: energy level modulations enabling match of donor and acceptor10.1002/aenm.201803541 ↗
9. Facile synthesis of polycyclic aromatic hydrocarbon (PAH)-based acceptors with fine-tuned optoelectronic properties: toward efficient additive-Free nonfullerene organic solar cells10.1002/aenm.201970096 ↗
10. Tuning of the conformation of asymmetric nonfullerene acceptors for efficient organic solar cells10.1039/C9TA07634D ↗
11. Fused cyclopentadithienothiophene acceptor enables ultrahigh short-circuit current and high efficiency >11% in as-cast organic solar cells10.1002/adfm.201904956 ↗
12. Effects of the number of bromine substitution on photovoltaic efficiency and energy loss of benzo[1,2-b:4,5-b′]diselenophene-based narrow-bandgap multibrominated nonfullerene acceptors10.1002/solr.201800250 ↗
13. Fluorene-fused ladder-type non-fullerene small molecule acceptors for high-performance polymer solar cells10.1039/C9QM00013E ↗
14. Fine-tuning of molecular packing and energy level through methyl substitution enabling excellent small molecule acceptors for nonfullerene polymer solar cells with efficiency up to 12.54%10.1002/adma.201706124 ↗
15. An unfused-core-based nonfullerene acceptor enables high-efficiency organic solar cells with excellent morphological stability at high temperatures10.1002/adma.201705208 ↗
16. Dithieno[3,2-b:2ʹ,3ʹ-d]pyrrol-Fused asymmetrical electron acceptors: a study into the effects of nitrogen-functionalization on reducing nonradiative recombination loss and dipole moment on morphology10.1002/advs.201902657 ↗
17. An asymmetrical fused-ring electron acceptor designed by a cross-conceptual strategy achieving 15.6% efficiency10.1039/D0TA03985C ↗
18. Ternary polymer solar cells with alloyed non-fullerene acceptor exhibiting 12.99% efficiency and 76.03% fill factor10.1016/j.nanoen.2019.02.038 ↗
19. Over 13% efficiency ternary nonfullerene polymer solar cells with tilted up absorption edge by incorporating a medium bandgap acceptor10.1002/aenm.201801968 ↗
20. Ternary nonfullerene polymer solar cells with efficiency >13.7% by integrating the advantages of the materials and two binary cells10.1039/C8EE01107A ↗
21. Ternary organic solar cells with J71 as donor and alloyed acceptors exhibiting 13.16% efficiency
22. Thick-film organic solar cells achieving over 11% efficiency and nearly 70% fill factor at thickness over 400 nm10.1002/adfm.201908336 ↗
23. Design of a new fused-ring electron acceptor with excellent compatibility to wide-bandgap polymer donors for high-performance organic photovoltaics10.1002/adma.201800403 ↗
24. Ternary small molecules organic photovoltaics exhibiting 12.84% efficiency
25. Semitransparent polymer solar cells with 12.37% efficiency and 18.6% average visible transmittance10.1016/j.scib.2019.09.016 ↗
26. An efficient strategy to supervise absorption, mobility, morphology of photovoltaic molecule by inserting a D-A unit10.1016/j.dyepig.2019.03.050 ↗
27. Efficient nonfullerene polymer solar cells enabled by a novel wide bandgap small molecular acceptor10.1002/adma.201606054 ↗
28. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
29. Narrow bandgap non-fullerene acceptor based on a thiophene-fused benzothiadiazole unit with a high short-circuit current density of over 20 mA cm-210.1039/C8TA00704G ↗
30. Near-infrared electron acceptors with fluorinated regioisomeric backbone for highly efficient polymer solar cells10.1002/adma.201803769 ↗
31. Enhancing the performance of polymer solar cells via core engineering of NIR‐absorbing electron acceptors10.1002/adma.201706571 ↗
32. Enhancing the performance of a fused-ring electron acceptor by unidirectional extension10.1021/jacs.9b08988 ↗
33. Fused-Ring core engineering for small molecule acceptors enable high-performance nonfullerene polymer solar cells10.1002/smtd.201900280 ↗
34. Thieno[3,2-b]pyrrolo-fused pentacyclic benzotriazole-based acceptor for efficient organic photovoltaics10.1021/acsami.7b10995 ↗
35. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
36. Fused benzothiadiazole: a building block for n-type organic acceptor to achieve high-performance organic solar cells10.1002/adma.201807577 ↗
37. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
38. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
39. Solvent additive-free ternary polymer solar cells with 16.27% efficiency
40. Improved charge transport and reduced nonradiative energy loss enable over 16% efficiency in ternary polymer solar cells10.1002/adma.201902302 ↗
41. A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency10.1039/C9EE01890E ↗
42. Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator10.1007/s11426-019-9634-5 ↗
43. Over 14.5% efficiency and 71.6% fill factor of ternary organic solar cells with 300 nm thick active layers10.1039/C9EE04020J ↗
44. Altering alkyl-chains branching positions for boosting the performance of small-molecule acceptors for highly efficient nonfullerene organic solar cells10.1007/s11426-019-9670-2 ↗
45. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
46. Fine-Tuning energy levels via asymmetric end groups enables polymer solar cells with efficiencies over 17%10.1016/j.joule.2020.03.023 ↗