Thermal-assisted Voc increase in an indenoindene-based non-fullerene solar system
Source abstract
Abstract
Abstract An indenoindene-cored small molecule acceptor of 3-ethylrodanine terminals, IBR, was synthesized to achieve high open-circuit voltage (Voc) solar cells. Adopting PBDB-T as the donor and IBR as the acceptor, the as-cast bulk-heterojunction non-fullerene solar cells show a promising Voc of 0.88 V. After a thermal annealing process at 160 °C for 10 min, the PBDB-T:IBR solar cells exhibit an enhanced Voc up to 1.16 V, among the highest Voc value reported for single junction organic solar cells, with obtaining a power conversion efficiency of 6.66%. Detailed investigation indicates that this thermal-activated Voc increase is caused by the microstructural rearrangement within polymer:IBR domains, which diminishes morphological defects, contributes to reduced bimolecular recombination and results in small saturation dark current density of the device. The work demonstrates the potential of IBR as efficient molecular acceptor for high Voc devices of special applications on tandem or ternary solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Flexible and semitransparent organic solar cells10.1002/aenm.201701791 ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
5. Interface design for high-efficiency non-fullerene polymer solar cells10.1039/C7EE00601B ↗
6. Toward solution-processed high-performance polymer solar cells: from material design to device engineering10.1021/acs.chemmater.6b02802 ↗
7. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
8. High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors10.1038/s41560-018-0234-9 ↗
9. Realizing over 13% efficiency in green-solvent-processed nonfullerene organic solar cells enabled by 1,3,4-thiadiazole-based wide-bandgap copolymers10.1002/adma.201703973 ↗
10. Near-infrared small molecule acceptor enabled high-performance nonfullerene polymer solar cells with over 13% efficiency10.1002/adfm.201803128 ↗
11. Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency10.1007/s11426-017-9199-1 ↗
12. Dithieno[3,2-b:2',3'-d]pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells10.1002/adma.201707150 ↗
13. An alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
14. Design of a new fused-ring electron acceptor with excellent compatibility to wide-bandgap polymer donors for high-performance organic photovoltaics10.1002/adma.201800403 ↗
15. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
16. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
17. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
18. Organic solar cells with an efficiency approaching 15%
19. Optical gaps of organic solar cells as a reference for comparing voltage losses10.1002/aenm.201801352 ↗
20. A minimal non-radiative recombination loss for efficient non-fullerene all-small-molecule organic solar cells with a low energy loss of 0.54 eV and high open-circuit voltage of 1.15 V10.1039/C8TA04665D ↗
21. Fullerene-free small molecule organic solar cells with a high open circuit voltage of 1.15 V10.1039/C5CC07973J ↗
22. Reduced voltage losses yield 10% efficient fullerene free organic solar cells with > 1 V open circuit voltages10.1039/C6EE02598F ↗
23. PDI derivative through fine-tuning the molecular structure for fullerene-free organic solar cells10.1021/acsami.7b08282 ↗
24. Recent progress in non-fullerene small molecule acceptors in organic solar cells (OSCs)10.1039/C6TC05066B ↗
25. A perylene diimide (PDI)-based small molecule with tetrahedral configuration as a non-fullerene acceptor for organic solar cells10.1039/C5TC00865D ↗
26. Simultaneously achieved high open-circuit voltage and efficient charge generation by fine-tuning charge-transfer driving force in nonfullerene polymer solar cells10.1002/adfm.201704507 ↗
27. The introduction of fluorine and sulfur atoms into benzotriazole-based p-type polymers to match with a benzotriazole-containing n-type small molecule: “the same-acceptor-strategy” to realize high open-circuit voltage10.1002/aenm.201801582 ↗
28. Controlling the cyano-containing A2 segments in A2-A1-D-A1-A2 type non-fullerene acceptors to combine with a benzotriazole-based p-type polymer: “same-acceptor-strategy” for high Voc organic solar cells10.1002/solr.201800332 ↗
29. Polymer homo-tandem solar cells with best efficiency of 11.3%10.1002/adma.201404220 ↗
30. Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage10.1021/ja205977z ↗
31. Compositional dependence of the open-circuit voltage in ternary blend bulk heterojunction solar cells based on two donor polymers10.1021/ja302935n ↗
32. Origin of the tunable open-circuit voltage in ternary blend bulk heterojunction organic solar cells10.1021/ja3112143 ↗
33. Design rules for donors in bulk-heterojunction solar cells - towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
34. Solvation-induced morphology effects on the performance of polymer-based photovoltaic devices10.1002/1616-3028(200112)11:6<420::AID-ADFM420>3.0.CO;2-K ↗
35. Open-circuit voltage limit caused by recombination through tail states in bulk heterojunction polymer-fullerene solar cells10.1063/1.3358121 ↗
36. Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers10.1002/adma.201002360 ↗
37. The origin of collected charge and open-circuit voltage in blended polyfluorene photovoltaic devices10.1002/adma.200305766 ↗
38. Molecular and morphological influences on the open circuit voltages of organic photovoltaic devices10.1021/ja9007722 ↗
39. On the origin of the open-circuit voltage of polymer-fullerene solar cells10.1038/nmat2548 ↗
40. Free energy control of charge photogeneration in polythiophene/fullerene solar cells: the influence of thermal annealing on P3HT/PCBM blends10.1002/adfm.200800727 ↗
41. Achievement of high Voc of 1.02 V for P3HT-based organic solar cell using a benzotriazole-containing non-fullerene acceptor10.1002/aenm.201602269 ↗
42. P3HT-based photovoltaic Cells with a high Voc of 1.22 V by using a benzotriazole-containing nonfullerene acceptor end-capped with thiazolidine-2,4-dione10.1021/acsmacrolett.7b00097 ↗
43. Carbon-bridged oligo(p-phenylenevinylene)s for photostable and broadly tunable, solution-processable thin film organic lasers10.1038/ncomms9458 ↗
44. Electron transfer through rigid organic molecular wires enhanced by electronic and electron-vibration coupling10.1038/nchem.2026 ↗
45. Homo- and copolymers based on carbon-bridged oligo(p-phenylenevinylene)s for efficient fluorescence over the entire visible region10.1021/acs.macromol.8b00102 ↗
46. A twisted thieno[3,4-b]thiophene-based electron acceptor featuring a 14-pi-electron indenoindene core for high-performance organic photovoltaics10.1002/adma.201704510 ↗
47. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
48. Stabilized polymers with novel indenoindene backbone against photodegradation for leds and solar cells10.1021/ma801420e ↗
49. Fast charge separation in a non-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗
50. Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells10.1039/c4ee00022f ↗
51. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
52. Light intensity dependence of open-circuit voltage of polymer : fullerene solar cells10.1063/1.1889240 ↗
53. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗