journal article·2022-04

Development of low-cost colourimetric and pH sensors based on PMMA@Cyanine polymers

Joana Galhano, Gonçalo A. Marcelo, Atanas Kurutos, Emilia Bértolo, Jose Luis Capelo-Martinez, Carlos Lodeiro, Elisabete Oliveira

Dyes and Pigments· Volume 200
Publisher page

Abstract

Cyanine derivatives 1–3 were successfully characterized and their sensorial ability studied against Zn2+, Co2+, Cd2+, Ni2+, Cu2+, Hg2+ and Ag+ metal ions. All dyes revealed a colourimetric selectivity towards Cu2+ metal ions, with the formation of mononuclear species. Cyanine 2 can detect and quantify the lowest concentrations of Cu2+ in aqueous media, 0.3 and 0.6 μM. With the aim of exploring the optical properties of these dyes, solid-supported devices were designed by the synthesis of polymethylmethacrylate (PMMA) polymers doped with dyes 1, 2, and 3 and their copper complexes. All PMMA_doped polymers were tested as temperature and low-pH sensors. PMMA_1 and PMMA_1@Cu2+ showed to be reversible fluorimetric thermoresponsive polymers, while PMMA_2, PMMA_3, PMMA_2@Cu2+ and PMMA_3@Cu2+ irreversible colourimetric and fluorimetric thermoresponsive polymers. From all acids tested, HCl, HBr, HClO4, H3PO4, HCOOH and CH3SO3H, the best results were obtained for PMMA_3 and PMMA_3@Cu2+ with HCl. After activation in 12 M HCl, both polymers were capable of sensing 8 M, 10 M, 11 M and 12 M HCl: their color changed from green to yellow and they showed an increase in their emission maxima at 805 nm in seconds. The capability to reversibly sense higher acid concentrations in seconds, after activation, for more than 10 cycles, make PMMA_3 and PMMA_3@Cu2+ good candidates for superacid sensing, allowing for a real-time follow up of contaminated affluents, or their incorporation in quality control in industrial processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Molecular Sensors and Ion Detection · Analytical Chemistry and Sensors · Luminescence and Fluorescent Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Recent development of chemosensors based on cyanine platforms10.1021/acs.chemrev.6b00001 ↗
2. Detection of metal ions in biological systems: a review10.1515/revac-2020-0118 ↗
3. New dual colorimetric/fluorimetric probes for Hg2+ detection & extraction based on mesoporous SBA-16 nanoparticles containing porphyrin or rhodamine chromophores10.1016/j.dyepig.2018.09.068 ↗
4. Green and red fluorescent dyes for translational applications in imaging and sensing analytes: a dual-color flag10.1002/open.201700177 ↗
5. Near-infrared heptamethine cyanine dyes. Synthesis, spectroscopic characterization, thermal properties and photostability10.1016/j.dyepig.2012.12.031 ↗
6. Near IR heptamethine cyanine dye–mediated cancer imaging10.1158/1078-0432.CCR-10-0059 ↗
7. Theranostic colloidal nanoparticles of pyrrolopyrrole cyanine derivatives for simultaneous near-infrared fluorescence cancer imaging and photothermal therapy10.1021/acsabm.8b00321 ↗
8. On the mechanisms of uptake of tumor-seeking cyanine dyes10.1021/acs.bioconjchem.8b00708 ↗
9. Near-infrared pH responsive heptamethine cyanine platforms: modulating the proton acceptor10.1016/j.dyepig.2020.108611 ↗
10. Fundamentals in the chemistry of cyanine dyes: a review10.1016/j.dyepig.2017.06.029 ↗
11. A new method for the synthesis of heptamethine cyanine dyes: synthesis of new near-infrared fluorescent labels10.1021/jo00113a018 ↗
12. Far-red to near infrared analyte-responsive fluorescent probes based on organic fluorophore platforms for fluorescence imaging10.1039/C2CS35313J ↗
13. A near-infrared fluorescent probe for detecting copper(ii) with high selectivity and sensitivity and its biological imaging applications10.1039/c1cc11885d ↗
14. Cu2+-selective NIR fluorescence sensor based on heptamethine cyanine in aqueous media and its application10.1016/j.saa.2020.118606 ↗
15. Highly fluorescent merocyanine and cyanine PMMA copolymers10.1002/marc.201800277 ↗
16. Emerging applications of stimuli-responsive polymer materials10.1038/nmat2614 ↗
17. Aromatic polyamides and acrylic polymers as solid sensory materials and smart coated fibres for high acidity colorimetric sensing10.1039/C4PY01545B ↗
18. Fabrication of colorimetric textile sensor based on rhodamine dye for acidic gas detection10.3390/polym12020431 ↗
19. Polymer chemosensors as solid films and coated fibres for extreme acidity colorimetric sensing10.1039/C4TA06009A ↗
20. Synthesis and photophysical properties of meso ‐aminophenyl‐substituted heptamethine dyes as potential leads to new contrast agents10.1111/cote.12403 ↗
21. Non-cytotoxic photostable monomethine cyanine platforms: combined paradigm of nucleic acid staining and in vivo imaging10.1016/j.jphotochem.2020.112598 ↗
22. Symmetric meso-chloro-substituted pentamethine cyanine dyes containing benzothiazolyl/benzoselenazolyl chromophores novel synthetic approach and studies on photophysical properties upon interaction with bio-objects10.1007/s10895-015-1700-4 ↗
23. Investigation of equilibria in solution. Determination of equilibrium constants with the HYPERQUAD suite of programs10.1016/0039-9140(96)01958-3 ↗
24. Berlman · 1971
25. Montalti · 2006
26. Electrogenerated chemiluminescence. 61. Near-IR electrogenerated chemiluminescence, electrochemistry, and spectroscopic properties of a heptamethine cyanine dye in MeCN10.1021/ac9704570 ↗
27. The fluorescence regulation mechanism of the paramagnetic metal in a biological HNO sensor10.1039/C5CC00787A ↗
28. An unusual emissive and colorimetric copper (II) detection by a selective probe based on a pseudo-crown cysteine dye: solution and gas phase studies10.1016/j.inoche.2017.11.001 ↗