Novel wide bandgap benzodithiophene-based polymer donors with electron-withdrawing indolin-2-one side chains for efficient organic solar cells with high open circuit voltage
Source abstract
Abstract
Abstract Two new π-conjugated polymers with donor backbone and π-conjugated indolin-2-one side chains, PBDTTI and PBDTTIF, are designed and synthesized as wide bandgap donors for non-fullerene acceptor-based organic solar cells (OSCs). The monomers containing electron accepting indolin-2-one side chains, (Z)-3-((2,5-dibromothiophen-3-yl) methylene)-1-methylindolin-2-one (M1) and (Z)-3-((2,5-dibromothiophen-3-yl) methylene)-5-fluoro-1-methylindolin-2-one (M2), can be easily synthesized via Knoevenagel condensation between 2,5-dibromothiophene-3-carbaldehyde and 2-oxindole or 5-fluoro-2-oxindole, respectively. Stille coupling polymerization of the electron donating benzodithiophene (BDT)-containing monomer 1,1′-[4,8-bis [5-(2-ethylhexyl)-2-thienyl]benzo [1,2-b:4,5-b′]dithiophene-2,6-diyl]bis [1,1,1-trimethylstannane] and M1 or M2 produced PBDTTI or PBDTTIF, respectively. The strong electron accepting π-conjugated 1-methylindolin-2-one and 5-fluoro-1-methylindolin-2-one side chains can achieve low-lying HOMO energy levels of −5.59 eV for PBDTTI and −5.60 eV for PBDTTIF, which is beneficial for realizing high open circuit voltage (VOC) of the resulting OSCs. On the other hand, since the electron acceptor units are on the side chains, the polymer backbone containing only electron donor units could maintain wide bandgaps of 1.91 eV and 1.89 eV for PBDTTI and PBDTTIF, respectively. When PBDTTI and PBDTTIF were used as donors and a small bandgap non-full acceptor ITIC as an acceptor, the resulting OSCs devices achieved VOC of 0.97 and 1.00 V, short circuit current densities (JSC) of 15.60 and 13.70 mAcm-2, and fill factors (FF) of 0.60 and 0.59, resulting in power conversion efficiencies of 8.00 and 7.70%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Synthesis and Properties of Aromatic Compounds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. A nonfullerene acceptor with a 1000 nm absorption edge enables ternary organic solar cells with improved optical and morphological properties and efficiencies over 15%10.1039/C9EE01030K ↗
2. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
3. Phthalimide-based π-conjugated small molecules with tailored electronic energy levels for use as acceptors in organic solar cells10.1039/C5TC01877C ↗
4. Single‐junction polymer solar cells with 16.35% efficiency enabled by a platinum(II) complexation strategy10.1002/adma.201901872 ↗
5. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
6. Recent advances in wide-bandgap photovoltaic polymers10.1002/adma.201605437 ↗
7. A wide-bandgap donor polymer for highly efficient non-fullerene organic solar cells with a small voltage loss10.1021/jacs.7b01606 ↗
8. Donor polymer design enables efficient non-fullerene organic solar cells10.1038/ncomms13094 ↗
9. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency
10. Polymer donors for high‐performance non‐fullerene organic solar cells10.1002/anie.201806291 ↗
11. Highly efficient fullerene-free polymer solar cells fabricated with polythiophene derivative10.1002/adma.201601803 ↗
12. Eco-friendly solvent-processed fullerene-free polymer solar cells with over 9.7% efficiency and long-term performance stability10.1002/aenm.201700566 ↗
13. Polymer main-chain substitution effects on the efficiency of nonfullerene BHJ solar cells10.1002/aenm.201700834 ↗
14. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
15. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
16. Benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymers: band gap and energy level control and their application in polymer solar cells10.1039/c1py00197c ↗
17. Synthetic principles for bandgap control in linear π-conjugated systems10.1021/cr950257t ↗
18. D‐A polymer with a donor backbone ‐ acceptor‐side‐chain structure for organic solar cells10.1002/ajoc.202000172 ↗
19. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
20. A chlorinated π-conjugated polymer donor for efficient organic solar cells10.1016/j.joule.2018.05.010 ↗
21. ( Z )-(Thienylmethylene)oxindole-Based polymers for high-performance solar cells10.1021/acs.macromol.5b02780 ↗
22. Cyano substituted (Z)-(thienylmethylene)-2-indolone as a new building block for near-IR absorbing polymers10.1016/j.dyepig.2018.02.042 ↗
23. Embedding electron-deficient nitrogen atoms in polymer backbone towards high performance n-type polymer field-effect transistors10.1039/C6SC01380E ↗
24. Advances in the synthesis and application of isoindigo derivatives
25. Low-temperature, solution-processed, high-mobility polymer semiconductors for thin-film transistors10.1021/ja067879o ↗
26. Influence of 2,2-bithiophene and thieno[3,2-b] thiophene units on the photovoltaic performance of benzodithiophene-based wide-bandgap polymers10.1039/C7TC00720E ↗
27. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
28. Polymer main-chain substitution effects on the efficiency of nonfullerene BHJ solar cells10.1002/aenm.201700834 ↗
29. Donor polymer fluorination doubles the efficiency in non-fullerene organic photovoltaics10.1039/C7TA07882J ↗
30. Impact of fluorine substituents on π-conjugated polymer main-chain conformations, packing, and electronic couplings10.1002/adma.201601282 ↗
31. Dramatic performance enhancement for large bandgap thick-film polymer solar cells introduced by a difluorinated donor unit10.1016/j.nanoen.2015.05.016 ↗
32. Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device10.1039/C4EE01529K ↗
33. Donor polymer based on alkylthiophene side chains for efficient non-fullerene organic solar cells: insights into fluorination and side chain effects on polymer aggregation and blend morphology10.1039/C8TA08769E ↗
34. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
35. Quinoxaline-based wide band gap polymers for efficient nonfullerene organic solar cells with large open-circuit voltages10.1021/acsami.8b04432 ↗
36. Dye-incorporated polynaphthalenediimide acceptor for additive-free high-performance all-polymer solar cells10.1002/anie.201800035 ↗
37. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
38. An expanded isoindigo unit as a new building block for a conjugated polymer leading to high-performance solar cells10.1039/C3TA15291J ↗
39. Effect of thiophene spacers in benzodithiophene-based polymers for organic electronics10.1002/pola.28781 ↗
40. Benzodithiophene homopolymers synthesized by Grignard metathesis (GRIM) and Stille coupling polymerizations10.1039/C4TA01739K ↗
41. Overcoming the morphological and efficiency limit in all-polymer solar cells by designing conjugated random copolymers containing a naphtho[1,2-c:5,6-c′]bis([1,2,5]thiadiazole)] moiety10.1039/C8TA09356C ↗
42. Synthesis and thin-film transistor performance of poly(4,8-didodecylbenzo[1,2-b:4,5-b‘]dithiophene)10.1021/cm0602592 ↗
43. A new polymer electron acceptor based on thiophene-S,S-dioxide unit for organic photovoltaics10.1002/marc.201700505 ↗
44. Wide bandgap polymer donors for high efficiency non-fullerene acceptor based organic solar cells
45. An isoindigo-based low band gap polymer for efficient polymer solar cells with high photo-voltage10.1039/c1cc11053e ↗
46. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
47. 14.7% efficiency organic photovoltaic cells enabled by active materials with a large electrostatic potential difference10.1021/jacs.8b12937 ↗
48. High efficiency polymer solar cells with efficient hole transfer at zero highest occupied molecular orbital offset between methylated polymer donor and brominated acceptor10.1021/jacs.9b09939 ↗
49. Fluoro-substituted n-type conjugated polymers for additive-free all-polymer bulk heterojunction solar cells with high power conversion efficiency of 6.71%10.1002/adma.201501214 ↗
50. Efficient and thermally stable organic solar cells based on small molecule donor and polymer acceptor10.1038/s41467-019-10984-6 ↗
51. Precise fluorination of polymeric donors towards efficient non-fullerene organic solar cells with balanced open circuit voltage, short circuit current and fill factor10.1039/D1TA01500A ↗
52. On the origin of the open-circuit voltage of polymer–fullerene solar cells10.1038/nmat2548 ↗
53. Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers10.1002/adma.201002360 ↗
54. Reduced energy loss in non-fullerene organic solar cells with isomeric donor polymers containing thiazole π-spacers10.1021/acsami.9b18048 ↗
55. Subtle polymer donor and molecular acceptor design enable efficient polymer solar cells with a very small energy loss