Near-infrared small molecule acceptors based on 4H-cyclopenta[1,2-b:5,4-b']dithiophene units for organic solar cells
Source abstract
Abstract
Abstract Two small-molecule non-fullerene acceptors (NFAs) CPDT-Me-2Eh and CPDT-4Cl-2Eh based on 4H-cyclopenta[1,2-b:5,4-b′] dithiophene as the electron-donating unit 2-(5/6-methyl-3-oxo-2,3-dihydro-1H-inden-1-ylidene) malononitrile and 2-(5,6-dichloro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile as the end group respectively were developed. Compared with CPDT-Me-2Eh, CPDT-4Cl-2Eh possesses red-shift absorption spectrum, lower HOMO and LUMO energy level, and higher electron mobility. Non-fullerene polymer solar cells based on PBDB-T: CPDT-4Cl-2Eh gave a power conversion efficiency (PCE) of 7.52%, with a fill factor (FF) of 64.46%, and a short-circuit current (Jsc) of 16.90 mA/cm2. As contrast, the cell based on PBDB-T: CPDT-Me-2Eh got a PCE value of 4.39%. Our results indicate that the small molecule acceptor containing the CPDT core can effectively extend the absorption spectrum to the near-infrared (NIR) region by chlorination of the capping group. Our work provides an easy routine to broaden the field of new NIR NFAs with high PCE based on non-fullerene OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
3. Solar cells: pictures from the blended zone10.1038/nmat1723 ↗
4. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
5. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
6. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra‐narrow band gap10.1002/anie.201610944 ↗
7. Efficient semitransparent organic solar cells with tunable color enabled by an ultralow‐bandgap nonfullerene acceptor10.1002/adma.201703080 ↗
8. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
9. 26 mA cm-2 Jsc from organic solar cells with a low-bandgap nonfullerene acceptor10.1016/j.scib.2017.10.017 ↗
10. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
11. The effect of end-capping groups in ADA type non-fullerene acceptors on device performance of organic solar cells10.1007/s11426-017-9102-1 ↗
12. Naphthodithiophene‐based nonfullerene acceptor for high‐performance organic photovoltaics: effect of extended conjugation10.1002/adma.201704713 ↗
13. Dithieno [3, 2‐b: 2′, 3′‐d] pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells10.1002/adma.201707150 ↗
14. Conformation locking on fused‐ring electron acceptor for high‐performance nonfullerene organic solar cells10.1002/adfm.201705095 ↗
15. Design of a highly crystalline low-band gap fused-ring electron acceptor for high-efficiency solar cells with low energy loss10.1021/acs.chemmater.7b02853 ↗
16. Terthieno [3, 2‐b] thiophene (6T) based low bandgap fused‐ring electron acceptor for highly efficient solar cells with a high short‐circuit current density and low open‐circuit voltage loss10.1002/aenm.201702831 ↗
17. Breaking 10% efficiency in semitransparent solar cells with fused-undecacyclic electron acceptor10.1021/acs.chemmater.7b04251 ↗
18. Ternary nonfullerene polymer solar cells with 12.16% efficiency by introducing one acceptor with cascading energy level and complementary absorption10.1002/adma.201703005 ↗
19. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
20. Alloy-like ternary polymer solar cells with over 17.2% efficiency10.1016/j.scib.2020.01.012 ↗
21. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
22. 18.02% Efficiency ternary organic solar cells with a small-molecular donor third component10.1016/j.cej.2021.130397 ↗
23. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
24. Cyclooctatetrathiophene-cored three-dimensional hole transport material enabling over 19% efficiency of perovskite solar cells10.1021/acsaem.9b01658 ↗
25. Improving open-circuit voltage by a chlorinated polymer donor endows binary organic solar cells efficiencies over 17%
26. Enhanced and balanced charge transport boosting ternary solar cells over 17% efficiency10.1002/adma.202002344 ↗
27. Realizing small energy loss of 0.55 ev, high open‐circuit voltage> 1 V and high efficiency> 10% in fullerene‐free polymer solar cells via energy driver10.1002/adma.201605216 ↗
28. Single‐junction binary‐blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
29. Effect of isomerization on high-performance nonfullerene electron acceptors10.1021/jacs.8b04027 ↗
30. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open‐circuit voltage10.1002/adma.201700254 ↗
31. An alkylated indacenodithieno [3, 2‐b] thiophene‐based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
32. Improved charge transport and absorption coefficient in indacenodithieno [3, 2‐b] thiophene‐based ladder‐type polymer leading to highly efficient polymer solar cells10.1002/adma.201203246 ↗
33. Simple non-fused electron acceptors for efficient and stable organic solar cells10.1038/s41467-019-10098-z ↗
34. Asymmetric‐indenothiophene‐based copolymers for bulk heterojunction solar cells with 9.14% efficiency10.1002/adma.201505957 ↗
35. High photovoltaic performance of a low‐bandgap polymer10.1002/adma.200600160 ↗
36. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
37. Fluorinated copolymer PCPDTBT with enhanced open-circuit voltage and reduced recombination for highly efficient polymer solar cells10.1021/ja305039j ↗
38. Simple near-infrared nonfullerene acceptors enable organic solar cells with >9% efficiency10.1021/acsami.8b20567 ↗
39. A star-shaped cyclopentadithiophene-based dopant-free hole-transport material for high-performance perovskite solar cells10.1039/D1CC02396A ↗
40. Exploration of the structure-property relationship of push-pull based dyads for single-molecule organic solar cells10.1016/j.dyepig.2019.107632 ↗
41. Molecularly engineered cyclopenta[2,1-b;3,4-b′]dithiophene-based hole-transporting materials for high-performance perovskite solar cells with efficiency over 19%10.1021/acsaem.1c00328 ↗
42. An acceptor–donor–acceptor structured small molecule for effective NIR triggered dual phototherapy of cancer10.1002/adfm.201910301 ↗
43. Donor−Acceptor−Donor type cyclopenta[2,1-b;3,4-b′]dithiophene derivatives as a new class of hole transporting materials for highly efficient and stable perovskite solar cells10.1021/acsaem.9b00859 ↗
44. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
45. Fused‐ring acceptors with asymmetric side chains for high‐performance thick‐film organic solar cells10.1002/adma.201703527 ↗
46. Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
47. Small-molecule acceptors based on 4H-cyclopenta [1, 2-b: 5, 4-b′] dithiophene units with near-infrared absorption for nonfullerene polymer solar cells10.1016/j.synthmet.2018.03.011 ↗
48. The end-capped group effect on dithienosilole trimer based small molecules for efficient organic photovoltaics10.1039/C6TC00164E ↗
49. Push–Pull type non-fullerene acceptors for polymer solar cells: effect of the donor core10.1021/acsami.7b05417 ↗
50. The end-capped group effect on dithienosilole trimer based small molecules for efficient organic photovoltaics10.1039/C6TC00164E ↗
51. Bandgap narrowing in non‐fullerene acceptors: single atom substitution leads to high optoelectronic response beyond 1000 nm10.1002/aenm.201801212 ↗
52. Revealing the effects of molecular packing on the performances of polymer solar cells based on A–D–C–D–A type non-fullerene acceptors10.1039/C8TA03753A ↗
53. An unfused‐core‐based nonfullerene acceptor enables high‐efficiency organic solar cells with excellent morphological stability at high temperatures10.1002/adma.201705208 ↗
54. Highly efficient fullerene-free organic solar cells operate at near zero highest occupied molecular orbital offsets10.1021/jacs.8b12126 ↗