Performance of asymmetric non-fullerene acceptors containing the 4,4,9,9-tetramethyl-4,9-dihydroselenopheno[2',3':5,6]-s-indaceno[1,2-b]thiophene core
Source abstract
Abstract
Abstract Through changing the terminated groups, three asymmetric non-fullerene acceptors containing a 4,4,9,9-tetramethyl-4,9-dihydroselenopheno[2',3':5,6]-s-indaceno[1,2-b]thiophene fused-ring core were designed and synthesized. The resultant acceptor-donor-acceptor (A-D-A) type of small molecules all show broad absorption spectra with tunable molecular energy levels and distinct molar extinction coefficients in solutions. The 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile terminated molecule (T-Se), has the smallest molar extinction coefficient of 1.83 × 105 M−1cm−1 with a bandgap of 1.62 eV, and a high-lying lowest unoccupied molecular orbital (LUMO) energy level (−3.83 eV). For the fluorinated molecule T-Se-4F, its molar absorption coefficient is enhanced to 2.05 × 105 M−1 cm−1, and its bandgap is narrowed to 1.58 eV, while its LUMO energy level is down-shifted to −3.93 eV. As for the molecule T-Se-Th having thiophene functionalized end-group, although the acquired LUMO energy level (−3.88 eV) is in between that of T-Se and T-Se-4F, it possesses the largest molar extinction coefficient (2.40 × 105 M−1cm−1), and a moderate bandgap of 1.60 eV. In solar cells with PM6 as electron-donor, the T-Se-4F- and T-Se-Th-based devices have superior exciton dissociation and charge collection properties, more weakly bimolecular recombination probabilities, and better electron transportability. As the results of the preceding characteristics, the T-Se-4F- and T-Se-Th-based devices achieve a higher current of 18.09 and 16.90 mA cm−2, better fill factors of 66.6 and 66.8%, relative to the 12.80 mA cm−2 and 62.1% of the T-Se-based device. Benefitting from the medium open-circuit voltage (VOC, 0.912 V), the T-Se-Th-based device successfully achieved the best power conversion efficiency of 10.29% among the three molecules. In contrast, the T-Se- and T-Se-4F-based devices owned the highest VOC of 0.935 V and the lowest VOC of 0.781 V, leading to the low efficiency of 7.44% and moderate efficiency of 9.41%, respectively, revealing the significant impact of the terminal groups on the properties of 4,4,9,9-tetramethyl-4,9-dihydroselenopheno[2',3':5,6]-s-indaceno[1,2-b]thiophene based asymmetric non-fullerene acceptors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
3. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
4. The new era for organic solar cells: non-fullerene small molecular acceptors10.1016/j.scib.2020.04.030 ↗
5. Nonfused nonfullerene acceptors with an A–D–a'–D–A framework and a benzothiadiazole core for high-performance organic solar cells10.1021/acsami.0c01850 ↗
6. A high dielectric constant non-fullerene acceptor for efficient bulk-heterojunction organic solar cells10.1039/C7TA10136H ↗
7. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
8. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
9. 17% efficient organic solar cells based on liquid exfoliated WS2 as a replacement for PEDOT:PSS10.1002/adma.201902965 ↗
10. Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in alloy-like model10.1039/C9EE03710A ↗
11. Graphdiyne derivative as multifunctional solid additive in binary organic solar cells with 17.3% efficiency and high reproductivity10.1002/adma.201907604 ↗
12. 18% efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
13. Organic photovoltaic cell with 17% efficiency and superior processability10.1093/nsr/nwz200 ↗
14. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
15. Selective hole and electron transportin efficient quaternary blend organic solar cells10.1016/j.joule.2020.06.014 ↗
16. Enhanced and balanced charge transport boosting ternary solar cells over 17% efficiency10.1002/adma.202002344 ↗
17. A non-fullerene acceptor with enhanced intermolecular π-core interaction for high-performance organic solar cells10.1021/jacs.0c07083 ↗
18. The new era for organic solar cells: polymer acceptors10.1016/j.scib.2020.05.023 ↗
19. Asymmetric nonfullerene small molecule acceptors for organic solar cells10.1002/aenm.201900999 ↗
20. Asymmetrical small molecule acceptor enabling nonfullerene polymer solar cell with fill factor Approaching 79%10.1021/acsenergylett.8b00825 ↗
21. Asymmetrical ladder-type donor-induced polar small molecule acceptor to promote fill factors approaching 77% for high-performance nonfullerene polymer solar cells10.1002/adma.201800052 ↗
22. Balancing charge generation and voltage loss toward efficient nonfullerene organic solar cells10.1016/j.mtadv.2019.100048 ↗
23. Asymmetric A–D–π–A-type nonfullerene small molecule acceptors for efficient organic solar cells10.1039/C9TA06476A ↗
24. Asymmetric selenophene-based non-fullerene acceptors for high-performance organic solar cells10.1039/C8TA11197A ↗
25. Asymmetric fused-ring electron acceptor with two distinct terminal groups for efficient organic solar cells10.1039/C9TA01285K ↗
26. A nonfullerene acceptor utilizing a novel asymmetric multifused-ring core unit for highly efficient organic solar cells10.1039/C8TC01229F ↗
27. High-performance eight-membered indacenodithiophene-based asymmetric A-D-A type non-fullerene acceptors10.1002/solr.201800246 ↗
28. Efficient modulation of end groups for the ssymmetric small molecule acceptors enabling organic solar cells with over 15% efficiency10.1039/D0TA01032D ↗
29. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
30. Diseleno[2,3-b:3’,2’-d]selenophene and diseleno[2,3-b:3’,2’-d]thiophene: building blocks for the construction of [7]Helicenes10.1021/acs.joc.7b01362 ↗
31. Non-fullerene polymer solar cells based on selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%10.1039/C6EE00315J ↗
32. Near-infrared absorbing non-fullerene acceptors with selenophene as π bridge for efficient organic solar cells10.1039/C8TA00783G ↗
33. Benzo[1,2-b:4,5-b’]diselenophene-Fused nonfullerene acceptors with alternative aromatic ring-based and monochlorinated end groups: a new synergistic strategy to simultaneously achieve highly efficient organic solar cells with thec energy loss of 0.49 eV10.1039/C9TA03177D ↗
34. Achieving high-performance non-halogenated nonfullerene acceptors-based organic solar cells with 13.7% efficiency through synergistic strategy of indacenodithieno[3,2-b]selenophene core unit and non-halogenated thiophene-based terminal group10.1039/C9TA08328F ↗
35. A bromine and chlorine concurrently functionalized end group for benzo[1,2-b:4,5-b']diselenophene-based nonfluorinated acceptors: new hybrid strategy to balance the crystallinity and miscibility of blend films enabling highly efficient polymer solar cells10.1039/C9TA14070K ↗
36. Heteroatom substitution-induced asymmetric A–D–A type non-fullerene acceptor for efficient organic solar cells10.1016/j.jechem.2019.03.009 ↗
37. Asymmetric selenophene-based non-fullerene acceptors for high-performance organic solar cells10.1039/C8TA11197A ↗
38. 13.76% efficiency nonfullerene solar cells enabled by selenophene integrated dithieno[3,2-b:2',3'-d]pyrrole asymmetric acceptors10.1039/C9QM00775J ↗
39. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
40. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
41. Effects of mono-fluorinated position at the end-capping groups on the performances of twisted non-fullerene acceptor-based polymer solar cells10.1021/acsami.9b18301 ↗
42. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
43. Non-fullerene polymer solar cells based on A main-chain twisted low bandgap acceptor with power conversion efficiency of 13.2%10.1021/acsenergylett.8b00627 ↗
44. Effects of alkyl terminal chains on morphology, charge generation, transport, and recombination mechanisms in solution-processed small molecule bulk heterojunction solar cells10.1002/aenm.201500386 ↗
45. Influences of the terminal groups on the performances of asymmetric small molecule acceptors-based polymer solar cells10.1016/j.dyepig.2020.108388 ↗
46. A novel thiophene-fused ending group enabling an excellent small molecule acceptor for high-performance fullerene-free polymer solar cells with 11.8% efficiency10.1002/solr.201700044 ↗
47. Asymmetrical ladder-type donor-induced polar small molecule acceptor to promote fill factors approaching 77% for high-performance nonfullerene polymer solar cells10.1002/adma.201800052 ↗
48. Effects of the isomerized thiophene-fused ending groups on the performances of twisted non-fullerene acceptor-based polymer solar cells10.1021/acsami.0c03842 ↗
49. Subtle polymer donor and molecular acceptor design enable efficient polymer solar cells with a very small energy loss10.1002/adfm.201907570 ↗
50. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
51. Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%10.1039/C6EE00315J ↗
52. Frisch · 2016
53. A small molecular electron acceptor based on asymmetric hexacyclic core of thieno[1,2-b]indaceno[5,6-b’] thienothiophene for efficient fullerene-free polymer solar cells10.1016/j.scib.2018.05.025 ↗
54. 26 mA cm-2 jsc from organic solar cells with a low-bandgap nonfullerene acceptor10.1016/j.scib.2017.10.017 ↗
55. Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with Bi(thienylenevinylene) Side chains10.1021/ja060141m ↗
56. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
57. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
58. A series of dithienobenzodithiophene based small molecules for highly efficient organic solar cells10.1007/s11426-016-0461-1 ↗
59. Intensity dependence of current voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
60. Ternary small molecule solar cells exhibiting power conversion efficiency of 10.3%10.1016/j.nanoen.2017.07.044 ↗