journal article·2020-10

Non-fullerene electron acceptors constructed by four strong electron-withdrawing end groups: Potential to improve the photoelectric performance of organic solar cells by theoretical investigations

Yezi Yang, Chuang Yao, Lei Li, Maolin Bo, Jianfeng Zhang, Cheng Peng, Zhongkai Huang, Jinshan Wang

Dyes and Pigments· Volume 181
Publisher page

Abstract

Abstract Recent advances in non-fullerene acceptors have enabled the power conversion efficiencies of organic solar cells (OSCs) to exceed 16%. Fused-ring electron acceptors (FREAs) are some of the most widely investigated non-fullerene acceptors. Classical FREAs, containing two strong electron-withdrawing end groups, are typically constructed using linear architecture. Meanwhile, the development of 2D FREAs is rarely studied. Therefore, we proposed a series of novel 2D FREAs, namely, 2D-IC, 2D-ICT, 2D-ICTS and 2D-ICTSS, which were composed of four strong electron-withdrawing end groups linked by a 2D fused-ring core to form a rotational C2h-symmetric structure. Through theoretical calculations we found that as the degree of conjugation increased, the spectrum red shifted, the integrated absorption intensity was enhanced, and the hole-electron Coulomb attraction decreased. Compared with linear molecule ITOIC-2F, which had the same end groups, 2D-ICTSS exhibited two significant absorption peaks at red and near-infrared regions. In addition, its integrated absorption intensity was 1.8 times that of ITOIC-2F. Simultaneously, the hole-electron Coulomb attraction of 2D-ICTSS was smaller than that of ITOIC-2F. When alkyl chains were introduced, the electron mobility of 2D-ICTSS was estimated to be 1.98 times that of ITOIC-2F. Given that numerous critical factors (including absorption intensity, exciton separation, and electron mobility) of 2D-ICTSS were superior to those of ITOIC-2F, we propose that this rotational C2h-symmetric molecule is highly suitable as a high-performance electron acceptor. This molecule is expected to be an important candidate for the development of next-generation FREAs for high-performance OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
2. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
3. Low-temperature, solution-processed hole selective layers for polymer solar cells10.1021/am302878m ↗
4. Jørgensen mikkel, 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
5. Low-bandgap near-IR conjugated polymers/molecules for organic electronics10.1021/acs.chemrev.5b00165 ↗
6. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
7. A tetraphenylethylene core-based 3D structure small molecular acceptor enabling efficient non-fullerene organic solar cells10.1002/adma.201404152 ↗
8. 10.8% efficiency polymer solar cells based on PTB7-Th and PC71BM via binary solvent additives treatment10.1002/adfm.201602181 ↗
9. High open-circuit voltage ternary organic solar cells based on ICBA as acceptor and absorption-complementary donors10.1039/C6QM00308G ↗
10. Single-Junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
11. A novel naphtho[1,2-c:5,6-c′]Bis([1,2,5]Thiadiazole)-based narrow-bandgap π-conjugated polymer with power conversion efficiency over 10%10.1002/adma.201603178 ↗
12. Alkyl side-chain engineering in wide-bandgap copolymers leading to power conversion efficiencies over 10%10.1002/adma.201604251 ↗
13. Molecular origin of donor- and acceptor-rich domain formation in bulk-heterojunction solar cells with an enhanced charge transport efficiency10.1021/acs.jpcc.6b11824 ↗
14. The evidence for fullerene aggregation in high-performance small-molecule solar cells by molecular dynamics simulation10.1002/aelm.201500217 ↗
15. Eco-compatible solvent-processed organic photovoltaic cells with over 16% efficiency10.1002/adma.201903441 ↗
16. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
17. Pronounced effects of a triazine core on photovoltaic performance–efficient organic solar cells enabled by a PDI trimer-based small molecular acceptor10.1002/adma.201605115 ↗
18. Strategies for the synthesis of functional naphthalene diimides10.1002/anie.201309746 ↗
19. Fine-tuning the 3D structure of nonfullerene electron acceptors toward high-performance polymer solar cells10.1002/adma.201500577 ↗
20. Beyond fullerenes: design of nonfullerene acceptors for efficient organic photovoltaics10.1021/ja508472j ↗
21. 14.7% efficiency organic photovoltaic cells enabled by active materials with a large electrostatic potential difference10.1021/jacs.8b12937 ↗
22. Achievement of high voc of 1.02 V for P3HT-based organic solar cell using a benzotriazole-containing non-fullerene acceptor10.1002/aenm.201602269 ↗
23. A thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
24. Nonfullerene acceptors based on extended fused rings flanked with benzothiadiazolylmethylenemalononitrile for polymer solar cells10.1039/C5TA05901A ↗
25. Structure evolution of oligomer fused-ring electron acceptors toward high efficiency of as-cast polymer solar cells10.1002/aenm.201600854 ↗
26. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
27. Fused hexacyclic nonfullerene acceptor with strong near-infrared absorption for semitransparent organic solar cells with 9.77% efficiency10.1002/adma.201701308 ↗
28. Terminal π-π stacking determines three-dimensional molecular packing and isotropic charge transport in an A-π-A electron acceptor for non-fullerene organic solar cells10.1039/C7TC01310H ↗
29. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
30. Chlorine substituted 2D-conjugated polymer for high-performance polymer solar cells with 13.1% efficiency via toluene processing10.1016/j.nanoen.2018.04.002 ↗
31. Enhancing the performance of organic solar cells by hierarchically supramolecular self-assembly of fused-ring electron acceptors10.1021/acs.chemmater.8b01319 ↗
32. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
33. Elucidating the key role of fluorine in improving the charge mobility of electron acceptor for non-fullerene organic solar cells by multiscale simulations10.1039/C8TC01315B ↗
34. A fused-ring based electron acceptor for efficient non-fullerene polymer solar cells with small HOMO offset10.1016/j.nanoen.2016.07.019 ↗
35. Small-molecule acceptor based on the heptacyclic benzodi(cyclopentadithiophene) unit for highly efficient nonfullerene organic solar cells10.1021/jacs.7b01170 ↗
36. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
37. Star-shaped fused-ring electron acceptors with C3h-symmetric and electron-rich benzotri(cyclopentadithiophene) core for efficient nonfullerene organic solar cells10.1021/acsami.9b08017 ↗
38. Quad-rotor-shaped non-fullerene electron acceptor materials with potential to enhance the photoelectric performance of organic solar cells10.1039/C9TA04084F ↗
39. A geometrical correction for the inter- and intra-molecular basis set superposition error in Hartree-Fock and density functional theory calculations for large systems10.1063/1.3700154 ↗
40. TD-DFT performance for the visible absorption spectra of organic Dyes: conventional versus long-range hybrids10.1021/ct700187z ↗
41. Quantum calculation of molecular energies and energy gradients in solution by a conductor solvent model10.1021/jp9716997 ↗
42. A multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
43. The ORCA program system10.1002/wcms.81 ↗
44. (Hole distribution volume)/VM (molecular volume) induced higher charge mobility of group IVA element-based host materials for potentially highly efficient blue OLEDs10.1021/acs.jpcc.8b06163 ↗
45. Ge-based bipolar small molecular host for highly efficient blue OLEDs: multiscale simulation of charge transport10.1039/C8TC00355F ↗
46. A robust and accurate tight-binding quantum chemical method for structures, vibrational frequencies, and noncovalent interactions of large molecular systems parametrized for all spd-block elements (Z = 1–86)10.1021/acs.jctc.7b00118 ↗
47. High performance molecular simulations through multi-level parallelism from laptops to supercomputers
48. UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations10.1021/ja00051a040 ↗
49. Canonical sampling through velocity rescaling
50. Polymorphic transitions in single crystals: a new molecular dynamics method10.1063/1.328693 ↗
51. Particle mesh Ewald: an N⋅log(N) method for Ewald sums in large systems10.1063/1.464397 ↗
52. A densely and uniformly packed organic semiconductor based on annelated beta-trithiophenes for high-performance thin film transistors10.1002/adfm.200800933 ↗
53. Naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole-Containing π-conjugated compound: nonfullerene electron acceptor for organic photovoltaics10.1002/adfm.201504153 ↗