journal article·2015-05

Stable and mechanically tunable vertical-cavity surface-emitting lasers (VCSELs) based on dye doped elastic polymeric thin films

Yuan Zhou, Jianmin Zhang, Quan Hu, Zhifu Liao, Yuanjing Cui, Yu Yang, Guodong Qian

Dyes and Pigments· Volume 116
Publisher page

Abstract

Abstract In this work, various pyrromethene dyes were doped into elastic films of polydimethylsiloxane (PDMS) as active layers of organic VCSELs and the laser properties of such PDMS-based VCSELs were systematically investigated. Mechanically tunable laser emission with high slope efficiencies, low threshold and wide tuning range were obtained. By uploading various stress or changing distributed-Bragg reflector (DBR) mirrors, single mode laser emission could be tuned from ∼590 to 690 nm, indicating their potential applications as cost-effective coherent sources on bio-chips. Under the pump energy 10 times higher than the threshold, the laser emission of organic VCSELs remained at its initial level after 1.2 × 105 pulses and a fast self-recovery process on the laser output energy with the elapse of aging time was observed. The differences between the self-recovery rates of various pyrromethene dyes were also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor Lasers and Optical Devices · Photonic and Optical Devices · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Duarte · 2009
2. Sensitivity gains in chemosensing by lasing action in organic polymers10.1038/nature03438 ↗
3. Chemosensing of 1,4-dinitrobenzene using bisfluorene dendrimer distributed feedback lasers10.1063/1.3189286 ↗
4. Design for optimized coupling of organic semiconductor laser light into polymer waveguides for highly integrated biophotonic sensors10.1016/j.mee.2009.01.076 ↗
5. Integration of organic semiconductor lasers and single-mode passive waveguides into a PMMA substrate10.1016/j.mee.2009.12.077 ↗
6. FRET-assisted laser emission in colloidal suspensions of dye-doped latex nanoparticles10.1038/nphoton.2012.201 ↗
7. New fluorinated polymers doped with BODIPY chromophore as highly efficient and photostable optical materials10.1021/cm052027t ↗
8. Laser and physical properties of BODIPY chromophores in new fluorinated polymeric materials10.1021/jp065080t ↗
9. Influence of the thickness and composition of the solid-state dye laser media on the laser properties10.1016/S0030-4018(02)01197-5 ↗
10. Array of a dye-doped polymer-based microlaser with multiwavelength emission10.1364/OL.36.001875 ↗
11. Dye-doped polyhedral oligomeric silsesquioxane (POSS)-modified polymeric matrices for highly efficient and photostable solid-state lasers10.1002/adfm.200900976 ↗
12. Highly photo-stable dye doped solid-state distributed-feedback (DFB) channeled waveguide lasers by a pen-drawing technique10.1364/OE.18.022080 ↗
13. Highly efficient long-lifetime dual-layered waveguide dye laser containing SiO2 nanoparticle-dispersed random scattering active media10.1143/JJAP.48.112503 ↗
14. Tunable solid-state lasers incorporating dye-doped, polymer-nanoparticle gain media10.1364/OL.28.002088 ↗
15. Dye-doped POSS solutions: random nanomaterials for laser emission10.1002/adma.200900799 ↗
16. Materials for a reliable solid-state dye laser at the red spectral edge10.1002/adfm.200900112 ↗
17. Enhanced laser action of Perylene-Red doped polymeric materials10.1364/OE.17.012777 ↗
18. Red-edge laser action from borondipyrromethene dyes10.1063/1.3327437 ↗
19. Elastically tunable self-organized organic lasers10.1002/adma.201003108 ↗
20. Mechanically tunable conjugated polymer distributed feedback lasers10.1063/1.3509405 ↗
21. Single-mode laser tuning from cholesteric elastomers using a “notch” band-gap configuration10.1364/OE.18.000575 ↗
22. Co-extruded mechanically tunable multilayer elastomer laser10.1364/OME.1.000108 ↗
23. Mechanically tunable microlasers based on highly viscous chiral liquid crystals10.1063/1.3665943 ↗
24. Fundamental characteristics of degradation-recoverable solid-state DFB polymer laser10.1364/OE.20.004690 ↗
25. Self-curable solid-state elastic dye lasers capable of mechanical stress probing10.1364/OL.38.001627 ↗
26. Diode-pumped distributed-feedback dye laser with an organic-inorganic microcavity10.1007/s00340-008-3082-7 ↗
27. Vertical cavity surface emitting laser in the near-infrared based on energy transfer between organic dyes10.1007/s00340-013-5640-x ↗