Effect of solvent-induced phase separation on performance of carboxylic indoline-based small-molecule organic solar cells
Source abstract
Abstract
Abstract In this study, we investigate a carboxyl indoline dye named D205 with deep highest occupied molecular orbital energy level of −5.4 eV as donor material together with [6,6]-phenyl C71 butyric acid methyl ester (PC70BM) as acceptor material in solution-processed bulk heterojunction solar cells. We employ chloroform (CF) and chlorobenzene (CB) as different solvents to investigate the influence of which on the active layer phase separation. The morphologies of D205:PC70BM with CB as solvent seem to be stable as the ratio of PC70BM increasing while it shows obvious change when processed by CF. The root-mean-square (RMS) values processed in CB change from 1.2 nm (D205:PC70BM = 1:2) to 0.8 nm (D205:PC70BM = 1:19). While the RMS values processed in CF change from 1.1 nm (D205:PC70BM = 1:2) to 13 nm (D205:PC70BM = 1:19). This may originate from that the rapid volatilization of CF solvent, leading to the aggregation behavior of the blending layer especially the aggregates of PC70BM. A proper RMS value leads to a better phase separation and thus can prompt balanced holes and electrons transportation. This can eventually benefit the short-circuit current. By regulating the ratio of D205:PC70BM as 1:4 in CB, an optimized power conversion efficiency(PCE) of 3.0% was reached after device annealing at 90 °C for 1 min under standard AM 1.5100 mW/cm2 sunlight.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
2. On-fabrication solid-state N-doping of graphene by an electron-transporting metal oxide layer for efficient inverted organic solar cells10.1002/aenm.201600172 ↗
3. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
4. Overview of high-efficiency organic photovoltaic materials and devices10.1016/j.rser.2015.08.032 ↗
5. Ultratransparent polymer/semitransparent silver grid hybrid electrodes for small-molecule organic solar cells10.1002/aenm.201401822 ↗
6. Nanoscale phase separation and high photovoltaic efficiency in solution-processed, small-molecule bulk heterojunction solar cells10.1002/adfm.200900832 ↗
7. Photovoltaics from soluble small molecules10.1016/S1369-7021(07)70277-8 ↗
8. Solar cells utilizing small molecular weight organic semiconductors10.1002/pip.788 ↗
9. A series of simple oligomer-like small molecules based on oligothiophenes for solution-processed solar cells with high efficiency10.1021/jacs.5b00305 ↗
10. 9.73% efficiency nonfullerene all organic small molecule solar cells with absorption-complementary donor and acceptor10.1021/jacs.6b12826 ↗
11. Enhanced efficiency parameters of solution-processable small-molecule solar cells depending on ITO sheet resistance10.1002/aenm.201300277 ↗
12. Esterification of indoline-based small-molecule donors for efficient co-evaporated organic photovoltaics10.1021/jp5030608 ↗
13. Indoline as electron donor unit in “Push-Pull” organic small molecules for solution processed organic solar cells: effect of the molecular π-bridge on device efficiency10.1016/j.orgel.2015.01.039 ↗
14. Squaraine dyes for organic photovoltaic cells10.1039/C5TA01879J ↗
15. J-aggregation of a squaraine dye and its application in organic photovoltaic cells10.1039/c3tc31243g ↗
16. The effect of processing solvent dependent film aggregation on the photovoltaic performance of squaraine: PC71BM bulk heterojunction solar cells10.1016/j.orgel.2017.09.015 ↗
17. Characterization of solid-state dye-sensitized solar cells utilizing high absorption coefficient metal-free organic dyes10.1021/ja076525+ ↗
18. Organic dye for highly efficient solid-state dye-sensitized solar cells10.1002/adma.200401410 ↗
19. High efficiency of dye-sensitized solar cells based on metal-free indoline dyes10.1021/ja0488277 ↗
20. Organic dye-sensitized ionic liquid based solar cells: remarkable enhancement in performance through molecular design of indoline sensitizers10.1002/anie.200705225 ↗
21. Highly-efficient metal-free organic dyes for dye-sensitized solar cells10.1039/b307819a ↗
22. High-efficiency organic-dye-sensitized solar cells controlled by nanocrystalline-TiO2 electrode thickness10.1002/adma.200502540 ↗
23. High-conversion-efficiency organic dye-sensitized solar cells with a novel indoline dye10.1039/b809093a ↗
24. Solid state electrolytes for dye-sensitized solar cells
25. Carbon-graphene nanocomposite cathodes for improved Co(II/III) mediated dye-sensitized solar cells10.1039/c3ta01635h ↗
26. Light cured networks containing metal organic frameworks as efficient and durable polymer electrolytes for dye-sensitized solar cells10.1039/c3ta12135f ↗
27. High molar extinction coefficient sensitizer for stable dye-sensitized solar cells10.1021/ja0436190 ↗
28. Solution-processed organic photovoltaics based on indoline dye molecules developed in dye-sensitized solar cells10.3390/molecules18033107 ↗
29. Synthesis of carboxylated chlorophylls and their application as functional materials10.1142/S1088424615500418 ↗
30. Solution processable D-A small molecules for bulk-heterojunction solar cells10.1039/c003946b ↗
31. Natural photosynthetic carotenoids for solution-processed organic bulk-heterojunction solar cells10.1021/jp309773b ↗
32. Molecular and morphological influences on the open circuit voltages of organic photovoltaic devices10.1021/ja9007722 ↗
33. Design rules for donors in bulk-heterojunction solar cells -Towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
34. Molecular understanding of the open-circuit voltage of polymer: fullerene solar cells10.1002/aenm.201100549 ↗