Strontium-substituted hydroxyapatite reinforced 3D-printed potato starch scaffolds for in vitro biological response evaluation
Source abstract
Abstract
The aim of this study was to evaluate the feasibility of fabricating biocompatible scaffolds based on a potato starch matrix reinforced with hydroxyapatite and strontium-substituted apatites using extrusion-based 3D printing. The minerals synthesized by the wet route exhibited nanoscale morphological features, as observed by SEM, while XRD and FTIR confirmed the expected apatite phases. Strontium substitution induced lattice distortion and reduced crystallinity, which influenced ion release behavior. Rheological analysis confirmed pseudoplastic behavior, supporting adequate printability and structural stability during the printing process. The incorporation of strontium contributed to increased mechanical strength, reaching values up to 45.8 kPa. The scaffolds exhibited limited degradation over 21 days, indicating suitability for applications requiring temporary structural support. ICP-MS analysis confirmed sustained Sr 2+ release, which may contribute to bioactive responses. In vitro biological assays indicated increased osteoblast metabolic viability and a possible reduction in osteoclast-related activity, although these observations are based on preliminary and partially qualitative analyses. Therefore, these results suggest the potential of starch-based composite scaffolds incorporating strontium-substituted apatites as a promising platform for bone tissue engineering applications. However, further in vitro and in vivo studies are required to validate these findings and assess the long-term biological performance of the developed scaffolds.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Innovative designs of 3D scaffolds for bone tissue regeneration: understanding principles and addressing challenges10.1016/j.eurpolymj.2024.113251 ↗
2. Biomimetic structural design in 3D-printed scaffolds for bone tissue engineering
3. A brief review on hydroxyapatite production and use in biomedicine10.1590/0366-69132019653742706 ↗
4. Ionic substituted hydroxyapatite for bone regeneration applications: a review
5. Bone grafts and biomaterials substitutes for bone defect repair: a review
6. Sculpting the future of bone: the evolution of absorbable materials in orthopedics10.1002/adma.202510848 ↗
7. Strontium calcium phosphate nanotubes as bioinspired building blocks for bone regeneration10.1021/acsami.0c12434 ↗
8. Advanced applications of strontium-containing biomaterials in bone tissue engineering
9. Strontium substituted hydroxyapatite promotes direct primary human osteoblast maturation10.1016/j.ceramint.2020.09.182 ↗
10. Functional polysaccharide-based hydrogel in bone regeneration: from fundamentals to advanced applications10.1016/j.carbpol.2024.123138 ↗
11. Advancements in the use of hydrogels for regenerative medicine: properties and biomedical applications10.1155/2022/3606765 ↗
12. Fabrication and characterization of a bioactive p olymethylmethacrylate‐based porous cement loaded with strontium/calcium apatite nanoparticles10.1002/jbm.a.37330 ↗
13. Evaluation of inductively coupled plasma mass spectrometry for determining Ca, Cu, Fe, Mg, Mn, Se and Zn in bovine semen samples using a simple sample dilution method10.1590/S0103-50532012000300026 ↗
14. Synthesis of composite corn starch/hydroxyapatite nanoparticle biomembranes and their effect on mineralization by osteoblasts10.1002/app.54579 ↗
15. Estrogen and phenol red free medium for osteoblast culture: study of the mineralization ability10.1007/s10616-015-9844-2 ↗
16. Tartrate-resistant acid phosphatase (TRAP) and the osteoclast/immune cell dichotomy10.1080/08916930701694667 ↗
17. Structure-to-property relationship as a function of strontium substitution in hydroxyapatite powders obtained by wet chemical precipitation10.1016/j.inoche.2025.114610 ↗
18. Chitosan/PVA reinforced boron/strontium multi-substituted hydroxyapatite-based biocomposites: effects of synthesis pH and coating on the physicochemical, mechanical, and in vitro biological properties of scaffolds
19. Assessing the bioactivity of gentamicin-preloaded Hydroxyapatite/Chitosan composite coating on titanium substrate10.1021/acsomega.0c01583 ↗
20. Hydroxyapatite nanopowders for effective removal of strontium ions from aqueous solutions10.3390/ma16010229 ↗
21. Fabrication and characterization of a bioactive p olymethylmethacrylate‐based porous cement loaded with strontium/calcium apatite nanoparticles10.1002/jbm.a.37330 ↗
22. Synthesis and characterization of strontium-substituted hydroxyapatite nanoparticles for bone regeneration10.1016/j.msec.2016.10.047 ↗
23. Gasser · 2017 · 27
24. Porous scaffolds for bone regeneration10.1016/j.jsamd.2020.01.007 ↗
25. Ozonation as a green modification for potato and cassava starches in 3D-printed bone scaffolds10.1016/j.ijbiomac.2026.152081 ↗
26. Substrate geometry directs the in vitro mineralization of calcium phosphate ceramics10.1016/j.actbio.2013.10.026 ↗
27. 3D printing windows and rheological properties for normal maize starch/sodium alginate composite gels10.1016/j.foodhyd.2023.109178 ↗
28. Manipulating gelatinization, retrogradation, and hydrogel properties of potato starch through calcium chloride-controlled crosslinking and crystallization behavior10.1016/j.carbpol.2025.123371 ↗
29. Impact of starch amylose and amylopectin on the rheological and 3D printing properties of corn starch10.1016/j.ijbiomac.2024.134403 ↗
30. Improvement of extrudability and self-support of emulsion-filled starch gel for 3D printing: increasing oil content10.1016/j.carbpol.2022.120293 ↗
31. Assessing the dynamic extrusion-based 3D printing process for power-law fluid using numerical simulation10.1016/j.jfoodeng.2019.109861 ↗
32. Clean modification of potato starch to improve 3D printing of potential bone bio-scaffolds
33. Rheological properties and 3D printability of tomato-starch paste with different types of starch10.1016/j.lwt.2024.116988 ↗
34. Effect of molecular structure changes during starch gelatinization on its rheological and 3D printing properties10.1016/j.foodhyd.2022.108364 ↗
35. Synthesis and antimicrobial analysis of high surface area strontium-substituted calcium phosphate nanostructures for bone regeneration10.3390/ijms241914527 ↗
36. Mechanically enhanced biodegradable scaffold based on SF microfibers for repairing bone defects in the distal femur of rats10.1016/j.ijbiomac.2024.137372 ↗
37. Biomimetic 3D printing of photocrosslinkable biodegradable elastomers-modified hybrid scaffolds as instructive platforms for bone tissue regeneration
38. Trabecular bone mineralization lag time determined by tetracycline double‐labeling in normal and certain pathological conditions
39. Dielectric and biodegradation properties of biodegradable nano-hydroxyapatite/starch bone scaffold10.1016/j.jmrt.2022.04.014 ↗
40. Structural and material double mechanical enhancement of HAp scaffolds promote bone defect regeneration10.1016/j.compositesa.2024.108600 ↗
41. Calcium-deficient hydroxyapatite as a potential sorbent for strontium10.1038/s41598-017-02269-z ↗
42. The influence of strontium doping on the crystal morphology of synthetic calcium phosphates10.1016/j.molstruc.2024.139030 ↗
43. Enhanced release of calcium ions from hydroxyapatite nanoparticles with an increase in their specific surface area10.3390/ma16196397 ↗
44. Calcite incorporated in silica/collagen xerogels mediates calcium release and enhances osteoblast proliferation and differentiation10.1038/s41598-019-56023-8 ↗
45. Dual effect of strontium ranelate: stimulation of osteoblast differentiation and inhibition of osteoclast formation and resorption in vitro10.1016/j.bone.2007.08.043 ↗
46. Fabrication and characterization of a bioactive p olymethylmethacrylate‐based porous cement loaded with strontium/calcium apatite nanoparticles10.1002/jbm.a.37330 ↗