journal article·2024-08Open access

Design and WLED application of KAlSiO4:Eu2+, Mn2+ phosphors with high quantum efficiency and high color stability prepared by a refiring strategy

Reziwanguli Yantake, Aierken Sidike, Wang Qingling, Zhou Shihang

Abstract

Among the green-cyan phosphors widely used in white LEDs, the full width at half maximum, thermal stability and quantum efficiency are key performance indicators. This kind of phosphor should have stable peak shape and peak position when working at different temperatures. It should simultaneously exhibit ultrawideband emission, which is conducive to the realization of two-color white light and simplification of the preparation process of white LED devices. In this paper, a series of KAlSiO4:Eu2+, Mn2+ luminescent materials were synthesized by a high-temperature recalcination strategy. Phase analysis and refinement results showed that the samples were effectively synthesized. After the first calcination, a bright green powder was obtained. The main emission peak was at 514 nm, and the FWHM was 30 nm. After recalcination, the color of the light emission from the representative samples changed from green to cyan-green, which was very close to white light, under near-UV irradiation. The emission range was wide, including blue and green light, and the full width at half maximum could reach 150 nm. After recalcination, the emission intensity of the representative samples increased by 3.4 times, and the quantum efficiency reached 90 % under near-UV excitation. The emission intensity at 150 °C was 82 % of that at room temperature. The Raman spectra showed that recalcination had a good effect on the lattice symmetry of the samples and promoted their luminescence intensity. The experimental value of the optical bandgap of the matrix was 5.6 eV, whereas the DFT-calculated bandgap was 4.8 eV, indicating good thermal stability. The chromaticity shift of the sample at high temperatures was very small, indicating good chromaticity stability. A commercial broadband red powder and representative samples after refiring were combined with 365 nm near-UV chips. The color rendering index of the white LED devices exhibited under different driving currents was greater than 90, indicating that the refiring strategy successfully improved the luminous performance of the representative samples. KAlSiO4:Eu2+, Mn2+ phosphors were verified to have good application prospects in the field of white LED lighting. This work provides a new idea and technology for calcination and color control of luminescent phosphors.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Gas Sensing Nanomaterials and Sensors · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Ce/Mn/Cr: Y3Al5O12 phosphor ceramics for white LED and LD lighting with a high color rendering index10.1016/j.ceramint.2023.04.205 ↗
2. The effect of correlated color temperature and illumination level of LED lighting on visual comfort during sustained attention activities10.3390/su15043826 ↗
3. Blue-light-excitable broadband yellow-emitting CaGd2HfSc (AlO4)3: Ce3+ garnet phosphors for white light-emitting diode devices with improved color rendering index
4. Eu2+ site preferences in the mixed cation K2BaCa(PO4)2 and thermally stable luminescence10.1021/jacs.8b06021 ↗
5. Design efficient energy transfer Ca2Al2SiO7: Bi3+, Eu3+ phosphors by cationic substitution for full-spectrum W-LED lighting10.1016/j.ceramint.2023.03.007 ↗
6. Development of novel Eu2+ and Li+ Co-doped cyan-emitting aluminosilicate phosphors10.1016/j.ceramint.2022.09.247 ↗
7. Preparation of novel KAlSiO4: Ce3+ broadband cyan-emitting phosphors via partial cation substitution for applications in white-light LEDs10.1016/j.ceramint.2023.01.199 ↗
8. Preparation and luminescence properties of Ba0.92-xSrxAl2Si2O8:0.08Eu2+ blue-cyan phosphors for white light LEDs10.1016/j.ceramint.2023.09.151 ↗
9. Enhance color rendering index via fullspectrum employing the important key of cyan phosphor10.1021/acsami.6b10233 ↗
10. Achieving full-visible-spectrum LED lighting via employing an efficient Ce3+-activated cyan phosphor
11. Cyan-light-emitting chalcogenometallate phosphor, KGaS2: Eu2+, for phosphor-converted white light-emitting diodes10.1021/acs.inorgchem.1c00509 ↗
12. Improved thermal stability and quantum efficiency of novel cyan phosphors toward full-visible-spectrum lighting10.1016/j.ceramint.2023.10.208 ↗
13. Syntheses and luminescent properties of CaAl2Si2O8: Eu2+, Mn2+ phosphors for white LED10.3938/jkps.68.363 ↗
14. High-efficient and thermal-stable Ca19Zn2(PO4)14: Eu2+, Mn2+ blue-red dual-emitting phosphor for plant cultivation LEDs10.1016/j.jallcom.2019.151956 ↗
15. Emission tunable of Mg0.695Si0.695Al1.39O3.65N0.35:Eu2+,Mn2+ oxynitride phosphors via energy transfer for WLEDs10.1016/j.jre.2020.06.021 ↗
16. Thermal stability and photoluminescence of Mn2+ activated green-emitting feldspar phosphor SrAl2Si2O8: Mn2+ for wide gamut w-LED backlight10.1016/j.optmat.2019.109535 ↗
17. Development of single matrix aluminum silicate fluorescent powder activated by Bi3+, Eu3+, and Eu2+ and use in white LEDs10.1016/j.jlumin.2023.120381 ↗
18. Density-functional theory calculations, luminescence properties and fluorescence ratiometric thermo-sensitive for a novel borate based red phosphor: NaBaSc(BO3)2:Ce3+,Mn2+10.1039/C8TC06034G ↗
19. Tunable white light of multi-cation-site Na2BaCa(PO4)2: Eu, Mn phosphor: synthesis, structure and PL/CL properties10.1039/C6TC04827G ↗
20. Luminescence and energy transfer of color-tunable Y2Mg2Al2SiO12: Eu2+, Ce3+ phosphors10.1021/acs.inorgchem.1c00317 ↗
21. Achieving the ultra-broadband near-infrared La3SnGa5O14:Cr3+ phosphor via multiple lattice sites occupation for biological nondestructive detection and night-vision technology
22. A novel orange-red emission of Ba2La8(SiO4)6O2: Sm3+ phosphor with good thermal stability and hydrophobicity10.1016/j.jallcom.2023.172686 ↗
23. Superb thermal stability purple-blue phosphor through synergistic effect of emission compensation and non-radiative transition restriction of Eu2+
24. Promotion of efficiency and thermal stability by restraining dynamic energy migration based on the highly symmetric rigid structure in the N-UV excitation green emission ganet phosphors
25. Uchida · Acta · 2006 · 70 · A677
26. Raman spectroscopic studies of silicate and related glass structure-a review
27. Densification‐induced infrared and Raman spectra variations of amorphous SiO210.1116/1.575047 ↗
28. A review of the structures of oxide glasses by Raman spectroscopy10.1039/C5RA13043C ↗
29. Structural design of new Ce3+/Eu2+-doped or co-doped phosphors with excellent thermal stabilities for WLEDs10.1039/C8TC06013D ↗
30. Tunable light-emitting and enhanced thermal stability via co-doping Ce3+ and Eu2+ in Sr3Gdz(Si3O9)310.1016/j.materresbull.2016.08.022 ↗