journal article·2021-12Open access

Mechanically robust nitrogen-rich plasma polymers: Biofunctional interfaces for surface engineering of biomedical implants

Omid Sharifahmadian, Chongpu Zhai, Juichien Hung, Ghazal Shineh, Callum A.C. Stewart, Arifah A. Fadzil, Mihail Ionescu, Yixiang Gan, Steven G. Wise, Behnam Akhavan

Abstract

Surface bio-functionalization through covalent attachment of bioactive molecules is a promising approach to facilitate rapid bone-implant integration. Radical-rich plasma polymer interlayers are highly attractive as platforms that enable covalent biofunctionalization in a single-step, reagent-free manner. However, fabrication of mechanically robust plasma polymer films, particularly for biomedical devices that operate in corrosive body fluids, is not trivial. Here we show a facile approach to tune the robustness of ion-assisted plasma polymer (IPP) films via simply varying the nitrogen atomic concentration incorporated into their structure. X-ray photoelectron spectroscopy data indicated that the total sp3/sp2 ratio of carbon atoms decreases in the films with increasing nitrogen atomic concentration. Electron recoil detection analysis data provided evidence that the hydrogen content decreases as the nitrogen atomic concentration increases. Nano-indentation and nano-scratch tests, together with long-term stability studies in simulated body fluid, showed a strong correlation between the nitrogen atomic concentration and the robustness and stability of the films. We confirmed the potential of the optimized, nitrogen-rich IPP film to regulate osseointegration by covalent attachment of fibronectin followed by quantifying primary osteoblast attachment and proliferation. The IPP films developed here hold great potential as robust interfaces for biomimetic surface engineering of implantable biomedical devices, in particular bone implants.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. A review of virtual reality based training simulators for orthopaedic surgery10.1016/j.medengphy.2015.11.021 ↗
2. Osteophilic properties of bone implant surface modifications in a cassette model on a decorticated goat spinal transverse process10.1016/j.actbio.2016.03.037 ↗
3. A review of biomimetic surface functionalization for bone-integrating orthopedic implants: mechanisms, current approaches, and future directions10.1016/j.pmatsci.2019.100588 ↗
4. Fabrication of magnesium/zinc-metal organic framework on titanium implants to inhibit bacterial infection and promote bone regeneration10.1016/j.biomaterials.2019.05.008 ↗
5. Cerium-doped hydroxyapatite/collagen coatings on titanium for bone implants10.1016/j.ceramint.2018.07.290 ↗
6. Peptide LL-37 coating on micro-structured titanium implants to facilitate bone formation in vivo via mesenchymal stem cell recruitment10.1016/j.actbio.2018.09.036 ↗
7. Non-thermal atmospheric pressure plasma functionalized dental implant for enhancement of bacterial resistance and osseointegration10.1016/j.dental.2016.11.011 ↗
8. Impact of dental implant surface modifications on osseointegration10.1155/2016/6285620 ↗
9. Synthesis of calcium-phosphorous doped TiO 2 nanotubes by anodization and reverse polarization: a promising strategy for an efficient biofunctional implant surface10.1016/j.apsusc.2016.12.105 ↗
10. Efficiency of nanotube surface–treated dental implants loaded with doxycycline on growth reduction of porphyromonas gingivalis10.11607/jomi.4975 ↗
11. Influence of laser structuring of PEEK, PEEK-GF30 and PEEK-CF30 surfaces on the shear bond strength to a resin cement10.1016/j.jmbbm.2018.05.008 ↗
12. Performance of hybrid additive manufactured titanium implants for orthopaedic applications : a review10.1016/j.jmbbm.2020.103671 ↗
13. Badv · 2020
14. Biofunctionalized chondrogenic shape-memory ternary scaffolds for efficient cell-free cartilage regeneration
15. Improving osteoblast functions and bone formation upon BMP-2 immobilization on titanium modified with heparin10.1016/j.carbpol.2014.08.005 ↗
16. Covalently immobilised type I collagen facilitates osteoconduction and osseointegration of titanium coated implants
17. Plasma activated coatings with dual action against fungi and bacteria10.1016/j.apmt.2018.04.003 ↗
18. Direct covalent attachment of silver nanoparticles on radical-rich plasma polymer films for antibacterial applications10.1039/C8TB01363B ↗
19. Radical-functionalized plasma polymers: stable biomimetic interfaces for bone implant applications10.1016/j.apmt.2019.07.002 ↗
20. Multifunctional protein-immobilized plasma polymer films for orthopedic applications10.1021/acsbiomaterials.8b00954 ↗
21. Free radical functionalization of surfaces to prevent adverse responses to biomedical devices10.1073/pnas.1103277108 ↗
22. Mechanically robust plasma-activated interfaces optimized for vascular stent applications10.1021/acsami.6b01279 ↗
23. Electric fields control the orientation of peptides irreversibly immobilized on radical-functionalized surfaces10.1038/s41467-017-02545-6 ↗
24. Tribocorrosion behavior of Ti6Al4V alloy after thermo-chemical treatment and DLC deposition for biomedical applications
25. Bioinspired surface modification of orthopedic implants for bone tissue engineering10.1016/j.biomaterials.2019.119366 ↗
26. Substrate-regulated growth of plasma-polymerized films on carbide-forming metals10.1021/acs.langmuir.6b02901 ↗
27. Effect of nitrogen doping on the microstructure and thermal stability of diamond-like carbon coatings containing silicon and oxygen10.1016/j.surfcoat.2021.127479 ↗
28. Improving high temperature tribological performances of Si doped diamond-like carbon by using W interlayer10.1016/j.triboint.2020.106241 ↗
29. Dual-purpose surface functionalization of Ti-6Al-7Nb involving oxygen plasma treatment and Si-DLC or chitosan-based coatings
30. Robust and durable surperhydrophobic F-DLC coating for anti-icing in aircrafts engineering10.1016/j.surfcoat.2020.126468 ↗
31. Tribomechanical properties of hard Cr-doped DLC coatings deposited by low-frequency HiPIMS10.1016/j.surfcoat.2019.124899 ↗
32. The effect of ammonia/acetylene ratio on characteristics of amorphous carbon films prepared by plasma enhanced chemical vapor deposition10.1016/j.surfcoat.2012.05.053 ↗
33. Effect of sp2/sp3 bonding ratio and nitrogen content on friction properties of hydrogen-free DLC coatings10.1016/j.triboint.2013.02.007 ↗
34. Iron, nitrogen and silicon doped diamond like carbon (DLC) thin films: a comparative study10.1016/j.tsf.2016.04.048 ↗
35. Enhancement of adhesion and corrosion resistance of diamond-like carbon thin films on Ti-6Al-4V alloy by nitrogen doping and incorporation of nanodiamond particles10.1016/j.surfcoat.2015.08.072 ↗
36. Nitrogen doping for adhesion improvement of DLC film deposited on Si substrate by Filtered Cathodic Vacuum Arc (FCVA) technique10.1016/j.apsusc.2014.03.059 ↗
37. Bakker · 2012 · 19
38. Linker-free covalent immobilization of nisin using atmospheric pressure plasma induced grafting10.1039/C7TB00113D ↗
39. Triboelectric microplasma powered by mechanical stimuli10.1038/s41467-018-06198-x ↗
40. Study on physio-chemical properties of plasma polymerization in C2H2/N2 plasma and their impact on COL X10.1038/s41598-017-09747-4 ↗
41. Large-scale synthesis of free-standing N-doped graphene using microwave plasma10.1038/s41598-018-30870-3 ↗
42. Cellular responses to radical propagation from ion-implanted plasma polymer surfaces10.1016/j.apsusc.2018.06.111 ↗
43. Interpretation of infrared spectra, a practical approach
44. Nitrogen incorporation into tetrahedral hydrogenated amorphous carbon10.1002/(SICI)1521-396X(199907)174:1<25::AID-PSSA25>3.0.CO;2-3 ↗
45. Nitrogen-rich plasma polymers : comparison of films deposited in atmospheric- and low-pressure plasmas
46. Effect of air post contamination on mechanical properties of amorphous carbon nitride thin films10.1016/j.ssc.2005.05.025 ↗
47. Evolution of hydrophobicity in plasma polymerised 1, 7-O ctadiene films10.1002/ppap.201300055 ↗
48. Tuning the hydrophobicity of plasma polymer coated silica particles10.1016/j.powtec.2013.09.018 ↗
49. Plasma polymerization of 1,1,1-trichloroethane yields a coating with robust antibacterial surface properties10.1039/C4RA01892C ↗
50. Nitrogen-incorporated hydrogenated amorphous carbon film electrodes on Ti substrates by hybrid deposition technique and annealing10.1149/2.0051603jes ↗
51. Submerged liquid plasma for the synthesis of unconventional nitrogen polymers10.1038/srep02414 ↗
52. Low-temperature synthesis of highly transparent carbon nitride thin films10.1088/0953-8984/12/6/109 ↗
53. Nanostructured carbon-based membranes: nitrogen doping effects on reverse osmosis performance
54. Microstructure and electrochemical properties of nitrogen-doped DLC films deposited by PECVD technique10.1016/j.apsusc.2014.12.162 ↗
55. Effect of oil temperature and counterpart material on the wear mechanism of ta-CNx coating under base oil lubrication10.1016/j.wear.2017.08.012 ↗
56. Tribological properties of ta-CNx coating sliding against steel and sapphire in unlubricated condition10.1016/j.triboint.2018.10.022 ↗
57. Carbon nitride deposited using energetic species: a review on XPS studies10.1103/PhysRevB.58.2207 ↗
58. Structural characterization of nitrogen doped diamond-like carbon films deposited by arc ion plating
59. Mechanisms of plasma polymerization - reviewed from a chemical point of view10.1002/ppap.201100038 ↗
60. The chemistry of nitrogen radicals. VII. The abstraction of hydrogen from substituted toluenes by the piperidinium radical10.1021/ja01001a034 ↗
61. Synthesis of diamond from methane and nitrogen mixture10.1063/1.109039 ↗
62. Nitrogen-rich plasma polymer coatings for biomedical applications: stability, mechanical properties and adhesion under dry and wet conditions10.1002/ppap.201400210 ↗
63. Ohmagari · 2018
64. Evaluation of surface energy of solid polymers using different models10.1002/(SICI)1097-4628(20000620)76:12<1831::AID-APP14>3.0.CO;2-Q ↗
65. A comprehensive model of stress generation and relief processes in thin films deposited with energetic ions10.1016/j.surfcoat.2005.02.161 ↗
66. Inhomogeneous growth of micrometer thick plasma polymerized films10.1021/acs.langmuir.6b01050 ↗
67. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
68. Ellipsometric investigation of nitrogen doped diamond thin films grown in microwave CH4/H2/N2 plasma enhanced chemical vapor deposition10.1063/1.4953779 ↗
69. Preparation of wide range refractive index diamond-like carbon films by means of plasma-enhanced chemical vapor deposition10.1364/AO.50.000G69 ↗
70. Effect of surface treatment on electrochemical behavior of CP Ti, Ti-6Al-4V and Ti-13Nb-13Zr alloys in simulated human body fluid10.1016/j.corsci.2005.06.003 ↗
71. Solvent-induced porosity in ultrathin amine plasma polymer coatings10.1021/jp803678w ↗
72. Nanoscratch test — a tool for evaluation of cohesive and adhesive properties of thin films and coatings10.1051/epjconf/20134800027 ↗
73. Review of recent progress in nanoscratch testing10.1179/1751584X13Y.0000000037 ↗
74. The influence of nitrogen on the dielectric constant and surface hardness in diamond-like carbon (DLC) films10.1016/j.diamond.2003.10.016 ↗
75. Controlling the nanostructure and stability of aC: H: N plasma polymers10.1016/j.tsf.2014.11.087 ↗
76. Gengenbach · 1997 · 985
77. Fabrication and characterisation of amine-rich organic thin films: focus on stability10.1002/ppap.201000042 ↗
78. Aging of 1, 3-diaminopropane plasma-deposited polymer films: mechanisms and reaction pathways10.1002/(SICI)1099-0518(19990701)37:13<2191::AID-POLA34>3.0.CO;2-F ↗
79. A multi-technique study of the spontaneous oxidation of n-hexane plasma polymers
80. Wrinkled interfaces: taking advantage of surface instabilities to pattern polymer surfaces10.1016/j.progpolymsci.2014.07.008 ↗
81. Enhanced attachment and growth of human endothelial cells derived from umbilical veins on ammonia plasma modified surfaces of PTFE and ePTFE synthetic vascular graft biomaterials
82. Effects of amide and amine plasma-treated ePTFE vascular grafts on endothelial cell lining in an artificial circulatory system
83. Plasma-treated PET surfaces improve the biocompatibility of human endothelial cells
84. Growth of human cells on plasma polymers: putative role of amine and amide groups10.1163/156856294X00194 ↗
85. Fibronectin is a survival factor for differentiated osteoblasts10.1242/jcs.111.10.1385 ↗
86. Bone adaptation of fibronectin-immobilized titanium implants using a tresyl chloride-activated method10.2485/jhtb.24.341 ↗
87. Fibronectin regulates calvarial osteoblast differentiation10.1242/jcs.109.6.1369 ↗
88. Interactions between integrin receptors and fibronectin are required for calvarial osteoblast differentiation in vitro10.1242/jcs.110.18.2187 ↗
89. Atomic force microscopy imaging of DNA covalently immobilized on a functionalized mica substrate10.1016/S0006-3495(99)76913-4 ↗
90. Selective immobilization of proteins to self-assembled monolayers presenting active site-directed capture ligands10.1073/pnas.072685299 ↗