journal article·2019-06Open access

Four-dimensional imaging and quantification of viscous flow sintering within a 3D printed bioactive glass scaffold using synchrotron X-ray tomography

A. Nommeots-Nomm, C. Ligorio, A.J. Bodey, B. Cai, J.R. Jones, P.D. Lee, G. Poologasundarampillai

Abstract

Bioglass® was the first material to form a stable chemical bond with human tissue. Since its discovery, a key goal was to produce three-dimensional (3D) porous scaffolds which can host and guide tissue repair, in particular, regeneration of long bone defects resulting from trauma or disease. Producing 3D scaffolds from bioactive glasses is challenging because of crystallization events that occur while the glass particles densify at high temperatures. Bioactive glasses such as the 13–93 composition can be sintered by viscous flow sintering at temperatures above the glass transition onset (Tg) and below the crystallization temperature (Tc). There is, however, very little literature on viscous flow sintering of bioactive glasses, and none of which focuses on the viscous flow sintering of glass scaffolds in four dimensions (4D) (3D + time). Here, high-resolution synchrotron-sourced X-ray computed tomography (sCT) was used to capture and quantify viscous flow sintering of an additively manufactured bioactive glass scaffold in 4D. In situ sCT allowed the simultaneous quantification of individual particle (local) structural changes and the scaffold's (global) dimensional changes during the sintering cycle. Densification, calculated as change in surface area, occurred in three distinct stages, confirming classical sintering theory. Importantly, our observations show for the first time that the local and global contributions to densification are significantly different at each of these stages: local sintering dominates stages 1 and 2, while global sintering is more prevalent in stage 3. During stage 1, small particles coalesced to larger particles because of their higher driving force for viscous flow at lower temperatures, while large angular particles became less faceted (angular regions had a local small radius of curvature). A transition in the rate of sintering was then observed in which significant viscous flow occurred, resulting in large reduction of surface area, total strut volume, and interparticle porosity because the majority of the printed particles coalesced to become continuous struts (stage 2). Transition from stage 2 to stage 3 was distinctly obvious when interparticle pores became isolated and closed, while the sintering rate significantly reduced. During stage 3, at the local scale, isolated pores either became more spherical or reduced in size and disappeared depending on their initial morphology. During stage 3, sintering of the scaffolds continued at the strut level, with interstrut porosity reducing, while globally the strut diameter increased in size, suggesting overall shrinkage of the scaffold with the flow of material via the strut contacts. This study provides novel insights into viscous flow in a complex non-idealized construct, where, locally, particles are not spherical and are of a range of sizes, leading to a random distribution of interparticle porosity, while globally, predesigned porosity between the struts exists to allow the construct to support tissue growth. This is the first time that the three stages of densification have been captured at the local and global scales simultaneously. The insights provided here should accelerate the development of 3D bioactive glass scaffolds.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Facial Trauma and Fracture Management · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Direct chemical bond of bioactive glass-ceramic materials to bone and muscle10.1002/jbm.820070304 ↗
2. Ionic products of bioactive glass dissolution increase proliferation of human osteoblasts and induce insulin-like growth factor II mRNA expression and protein synthesis10.1006/bbrc.2000.3503 ↗
3. Bioglass and bioactive glasses and their impact on healthcare10.1111/ijag.12252 ↗
4. Review of bioactive glass: From Hench to hybrids10.1016/j.actbio.2012.08.023 ↗
5. Highly degradable porous melt-derived bioactive glass foam scaffolds for bone regeneration10.1016/j.actbio.2017.04.030 ↗
6. Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives10.1016/j.msec.2011.04.022 ↗
7. Sintering of ceramics
8. Crystallization mechanism of the bioactive glasses, 45S5 and S53P410.1111/j.1551-2916.2011.05012.x ↗
9. Effect of pH and ionic strength on the reactivity of Bioglass® 45S510.1016/j.biomaterials.2004.07.009 ↗
10. Effect of crystallization on apatite-layer formation of bioactive glass 45S510.1002/(SICI)1097-4636(199604)30:4<509::AID-JBM9>3.0.CO;2-T ↗
11. Factors affecting crystallization of bioactive glasses10.1016/j.jeurceramsoc.2006.04.017 ↗
12. Structural analysis of bioactive glasses10.1016/j.jnoncrysol.2004.07.067 ↗
13. A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics10.1016/j.biomaterials.2011.01.004 ↗
14. Structural studies and mechanical properties of some borate glasses doped with different alkali and cobalt oxides10.1016/j.cap.2012.07.007 ↗
15. In vitro assessment of degradation and bioactivity of robocast bioactive glass scaffolds in simulated body fluid10.1016/j.ceramint.2012.05.019 ↗
16. Evaluation of borate bioactive glass scaffolds with different pore sizes in a rat subcutaneous implantation model10.1177/0885328212470013 ↗
17. Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration10.1016/j.actbio.2011.06.030 ↗
18. Phosphate glasses for tissue engineering: Part 1. Processing and characterisation of a ternary-based P2O5-CaO-Na2O glass system10.1016/S0142-9612(03)00546-5 ↗
19. Phosphate based glasses for biomedical applications10.1039/b307119g ↗
20. Compositional dependence of bioactivity of glasses in the system Na2O-K2O-MgO-CaO-B2O3-P2O5-SiO210.1002/(SICI)1097-4636(199710)37:1<114::AID-JBM14>3.0.CO;2-G ↗
21. T-T-T behaviour of bioactive glasses 1–98 and 13–9310.1016/j.jeurceramsoc.2011.10.040 ↗
22. Mechanical and in vitro performance of 13-93 bioactive glass scaffolds prepared by a polymer foam replication technique10.1016/j.actbio.2008.04.019 ↗
23. Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering10.1088/1758-5082/3/2/025004 ↗
24. Direct ink writing of highly bioactive glasses10.1016/j.jeurceramsoc.2017.08.006 ↗
25. Oriented bioactive glass (13-93) scaffolds with controllable pore size by unidirectional freezing of camphene-based suspensions: microstructure and mechanical response10.1016/j.actbio.2010.08.025 ↗
26. Mechanics of viscous sintering on the micro- and macro-scale10.1016/j.actamat.2012.09.054 ↗
27. Sintering force behind the viscous sintering of two particles10.1016/j.actamat.2016.03.006 ↗
28. Sintering force behind shape evolution by viscous flow10.1016/j.jeurceramsoc.2014.10.014 ↗
29. Study of the initial stages of sintering solids by viscous flow, evaporation-condensation, and self-diffusion10.1063/1.1721874 ↗
30. Simulation of viscous sintering using the lattice Boltzmann method10.1088/0965-0393/21/2/025003 ↗
31. Sintering and rounding kinetics of irregular glass particles10.1111/jace.15997 ↗
32. Creep and densification during sintering of glass powder compacts10.1111/j.1151-2916.1987.tb04877.x ↗
33. Effect of particle shape on the kinetics of sintering of glass10.1111/j.1151-2916.1968.tb13334.x ↗
34. Effect of magnesium ion incorporation on the thermal stability, dissolution behavior and bioactivity in Bioglass-derived glasses10.1016/j.jnoncrysol.2013.10.001 ↗
35. Kinetics of thermal degradation of char-forming plastics from thermogravimetry. Application to a phenolic plastic10.1002/polc.5070060121 ↗
36. Crystallization behavior of phosphate glasses and its impact on the glasses' bioactivity10.1007/s10853-015-8869-4 ↗
37. Crystallization kinetics, mineralization and crack propagation in partially crystallized bioactive glass 45S510.1016/j.msec.2010.06.019 ↗
38. Synthesis, processing and characterization of a bioactive glass composition for bone regeneration10.1016/j.ceramint.2012.09.011 ↗
39. Glass sintering with concurrent crystallization
40. Application of hot-stage microscopy to evaluating sample morphology changes on heating10.1007/s10973-016-5323-z ↗
41. Hot stage optical microscopy studies of crystallization in fluoride glass melts10.1016/S0022-3093(05)80781-1 ↗
42. Sintering behaviour of 45S5 bioactive glass10.1016/j.actbio.2008.05.019 ↗
43. First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomography10.1016/j.actamat.2004.09.027 ↗
44. Constrained sintering of glass films: microstructure evolution assessed through synchrotron computed microtomography10.1016/j.actamat.2011.06.022 ↗
45. Qualitative and quantitative insights into multiphase flow in ceramic sponges using X-ray computed tomography10.1016/j.ces.2015.08.015 ↗
46. Hydrodynamic coarsening in phase-separated silicate melts10.1016/j.actamat.2015.03.045 ↗
47. Fast in situ 3D nanoimaging: a new tool for dynamic characterization in materials science10.1016/j.mattod.2017.06.001 ↗
48. The kinetics of contact formation during sintering by diffusion mechanisms
49. Coherent imaging at the Diamond beamline I1310.1002/pssa.201184272 ↗
50. Experimental stations at I13 beamline at Diamond light Source10.1088/1742-6596/425/18/182003 ↗
51. Quantitative 3D characterization of solidification structure and defect evolution in Al alloys
52. Revealing the micromechanisms behind semi-solid metal deformation with time-resolved X-ray tomography10.1038/ncomms5464 ↗
53. Transgranular liquation cracking of grains in the semi-solid state10.1038/ncomms9300 ↗
54. Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy10.1016/j.actamat.2015.11.028 ↗
55. Kak · 1988
56. A high-throughput system for high-quality tomographic reconstruction of large datasets at Diamond Light Source
57. Optimising complementary soft tissue synchrotron X-ray microtomography for reversibly-stained central nervous system samples10.1038/s41598-018-30520-8 ↗
58. Data analysis WorkbeNch (DAWN)10.1107/S1600577515002283 ↗
59. Hydrogen porosity in directional solidified aluminium-copper alloys:in situ observation10.1016/S1359-6454(97)00081-5 ↗
60. Pore evolution in a direct chill cast Al–6wt.% Mg alloy during hot rolling10.1016/j.actamat.2006.06.029 ↗
61. Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds10.1016/j.biomaterials.2006.11.014 ↗
62. Viscosity of glass-forming liquids10.1073/pnas.0911705106 ↗
63. Bioactive glass innovations through academia-industry collaboration10.1111/ijag.12202 ↗
64. Meszaros · 2011 · vol. 52 · 111
65. 4 – Initial Stage Sintering
66. Packing and sintering of two-dimensional structures made from bimodal particle size distributions10.1111/j.1151-2916.1987.tb05638.x ↗
67. Volume, shape, and roundness of quartz particles
68. Chapter 17 – solubility, permeability, and diffusion of gases in glass
69. Gas solubility and diffusion in oxide glasses – implications for nuclear wasteforms10.1016/j.mspro.2014.10.036 ↗
70. Consolidation of participate layers in the fabrication of optical fiber preforms10.1111/j.1151-2916.1980.tb10657.x ↗