journal article·2026-08Open access

Operando cryogenic processing effects on residual stress and magnetism of martensitic stainless steel for energy sector

Patricia Jovičević-Klug, Matic Jovičević-Klug, Levi Tegg, James R. Hester, Jan Čapek, Efthymios Polatidis, Julie M. Cairney, Jeffrey McCord, Michael Rohwerder

Abstract

Martensitic stainless steels (MSS) are widely used in the energy sector due to their high hardenability, corrosion resistance, and favourable mechanical properties. Their performance in extreme environments—such as fusion reactors, offshore systems, and hydrogen infrastructure—depends strongly on the interplay between microstructure, residual stresses, and resulting properties, including magnetic behaviour and mechanical strength. In fusion applications, neutron irradiation and high magnetic fields can significantly alter MSS microstructure, potentially compromising material stability and leading to component failure. To enhance microstructural stability under such conditions, advanced processing methods are required. Cryogenic processing (CP), which involves exposing materials to temperatures below 77 K, has shown promise in improving properties like hardness and corrosion resistance through microstructural refinement. However, the underlying mechanisms governing these improvements, particularly in MSS for energy applications, remain insufficiently understood. Existing studies indicate that CP can influence magnetic properties and residual stresses, but comprehensive operando investigations, especially under strong magnetic fields, are lacking. This study investigates the effects of CP on MSS EN X17CrNi16-2 under different treatment conditions, including conventional heat treatment, CP, and CP combined with magnetic field exposure up to 5 T. The work examines micro-residual stresses ( ex-situ and in-situ ), magnetic behaviour using advanced microscopy techniques, and mechanical properties via microhardness testing. Additionally, it provides novel insights into the time-dependent mechanisms of CP through advanced neutron measurements, contributing to a deeper understanding of structure–property relationships in MSS for future energy applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Kutz · 2006 · vol. 1 · 1
2. Focused review on factors affecting martensitic stainless steels and super martensitic stainless steel passive film in the oil and gas field10.1007/s10008-024-05984-6 ↗
3. Sustainable new technology for the improvement of metallic materials for future energy applications10.3390/coatings13111822 ↗
4. Enhanced corrosion resistance of next generation martensitic stainless steel for future energy sector10.1016/j.corsci.2026.114053 ↗
5. Recent developments of stainless steels in structural applications10.1002/cepa.1560 ↗
6. Stainless steels: an introduction and their recent developments - google books, (n.d.). https://books.google.de/books?hl=en&lr=&id=ERLva3XscicC&oi=fnd&pg=PP1&dq=new+applications+of+martensitic+stainless+steels+in+energy+sector&ots=KpGoh-jTqZ&sig=h2k-LwkNg888ENB56fV-BlJdKyI&redir_esc=y#v=onepage&q&f=false (accessed March 19, 2026).
7. Properties, weldability and corrosion behavior of supermartensitic stainless steels for on-and offshore applications10.3139/120.110884 ↗
8. Advancing renewable energy materials: corrosion and strength optimization of 17-4 PH stainless steel for geothermal turbines
9. Suppression of Cr nanoclusters and enrichments in Fe–Cr based alloys with cryogenic processing for future energy sector10.1016/j.jmrt.2025.05.176 ↗
10. Understanding nanoscale oxide build up on EUROFER9710.1016/j.corsci.2025.112691 ↗
11. Hydrogen diffusion and trapping in a cryogenic processed high-Cr ferrous alloy10.1038/s41529-024-00522-1 ↗
12. High-performance metallic materials for applications in infrastructure and energy sectors10.1002/stco.202300025 ↗
13. Hydrogen environment assisted cracking of a modern ultra-high strength martensitic stainless steel10.5006/2437 ↗
14. Aerospace steel: properties, processing, and applications
15. Development and characterization of 15Cr-5Ni-1W martensitic precipitation hardening stainless steel for aerospace applications10.4028/www.scientific.net/MSF.830-831.15 ↗
16. An experimental investigation of martensitic stainless steel in aircraft and aerospace industry for thermal wear performance and corrosion potential10.1515/pm-2022-0021 ↗
17. 2012 · 199
18. Current trends in metallic materials for body panels and structural members used in the automotive industry10.3390/ma17030590 ↗
19. Effect of tempering on the microstructure, electrical, and magnetic properties of Eurofer-97 steel10.1016/j.jnucmat.2015.03.020 ↗
20. Particle interspacing effects on the mechanical behavior of a Fe–TiB2 metal matrix composite using FFT-based mesoscopic field dislocation mechanics10.1186/s40323-020-0141-z ↗
21. Annealing effects on microstructure and coercive field of ferritic–martensitic ODS Eurofer steel10.1016/j.msea.2010.10.051 ↗
22. Structural, thermal, electrical and magnetic properties of Eurofer 97 steel10.1016/j.jnucmat.2007.03.267 ↗
23. The long-term creep behavior and damage mechanism of RAFM steel for fusion reactors10.1016/j.fusengdes.2023.113908 ↗
24. The change of saturation magnetization in neutron-irradiated low-alloy steel10.1016/S0921-4526(02)01777-5 ↗
25. Materials degradation in fission reactors: lessons learned of relevance to fusion reactor systems10.1016/j.jnucmat.2007.03.008 ↗
26. Superconducting magnet system in a fusion reactor10.1016/j.jnucmat.2004.04.151 ↗
27. Magnetic Fusion Confinement with Tokamaks and Stellarators | International Atomic Energy Agency, (n.d.). https://www.iaea.org/bulletin/magnetic-fusion-confinement-with-tokamaks-and-stellarators (accessed April 10, 2026).
28. Materials to be used in future magnetic confinement fusion reactors
29. The challenge of developing structural materials for fusion power systems10.1016/S0022-3115(98)00352-3 ↗
30. Present limits and improvements of structural materials for fusion reactors – a review10.1016/S0022-3115(02)00794-8 ↗
31. Designing advanced High-Cr ferrous alloys for next-generation energy applications through cryogenic processing10.1016/j.apsusc.2024.160290 ↗
32. Complex interdependency of microstructure, mechanical properties, fatigue resistance and residual stress of austenitic stainless steels AISI 304L10.3390/ma16072638 ↗
33. Coupled role of alloying and manufacturing on deep cryogenic treatment performance on high-alloyed ferrous alloys10.1016/j.jmrt.2022.04.025 ↗
34. Correlative surface and bulk analysis of deep cryogenic treatment influence on high-alloyed ferrous alloy10.1016/j.jmrt.2022.11.075 ↗
35. Assessment of deep cryogenic heat-treatment impact on the microstructure and surface chemistry of austenitic stainless steel10.1016/j.surfin.2022.102456 ↗
36. Understanding carbide evolution and surface chemistry during deep cryogenic treatment in high-alloyed ferrous alloy10.1016/j.apsusc.2022.155497 ↗
37. Investigation of the microstructural changes and hardness variations of sub-zero treated Cr-V Ledeburitic Tool Steel due to the tempering treatment10.1007/s11665-018-3261-6 ↗
38. Deep cryogenic treatment: a bibliographic review10.2174/1874155X00802010001 ↗
39. Cryogenic treatments on AISI 420 stainless steel: microstructure and mechanical properties10.1016/j.msea.2014.03.059 ↗
40. Effect of low temperature tempering prior cryogenic treatment on carburized steels10.1016/j.jmatprotec.2006.01.011 ↗
41. Deep cryogenic treatment: effects on mechanical properties of AISI 302 stainless steel and 18NiCrMo5 Carburized steel10.4028/www.scientific.net/KEM.417-418.793 ↗
42. Effects on corrosion resistance of rebar subjected to deep cryogenic treatment10.1007/s12206-016-1211-5 ↗
43. Effect of cyclic deep cryogenic treatment on corrosion resistance of 7075 alloy10.1007/s12540-021-00975-y ↗
44. Deep cryogenic treatment of AISI 302 stainless steel: part II - Fatigue and corrosion10.1016/j.matdes.2010.05.015 ↗
45. Enhancing the corrosion resistance performance of structural steel via a novel deep cryogenic treatment process10.1016/j.vacuum.2018.10.080 ↗
46. Elucidating the role of secondary cryogenic treatment on mechanical properties of a martensitic ultra-high strength stainless steel10.1016/j.matchar.2021.111277 ↗
47. Magnetic properties of stainless steels at room and cryogenic temperatures10.1016/j.jmmm.2009.01.002 ↗
48. In situ resistivity measurements of RAFM base alloys at cryogenic temperatures: the effect of proton irradiation10.1016/j.jnucmat.2014.01.016 ↗
49. Achievement of Ultrafine Grain structure by means of recrystallization treatments10.1016/j.jnucmat.2022.153852 ↗
50. Investigation of microstructural attributes of steel surfaces through magneto-optical kerr effect10.1016/j.jmrt.2021.01.106 ↗
51. Effects of applying an external magnetic field during the deep cryogenic heat treatment on the corrosion resistance and wear behavior of 1.2080 tool steel10.1016/j.matdes.2012.03.045 ↗
52. Cryogenic study of the magnetic and thermal stability of retained austenite in nanostructured bainite10.1080/14686996.2019.1625722 ↗
53. Optimized preparation of deep cryogenic treated steel and Al-alloy samples for optimal microstructure imaging results
54. Hauk · 1997
55. Maynard-Casely · 2026 · vol. 59 · 1600
56. Measuring single-crystal diffuse neutron scattering on the wombat high-intensity powder diffractometer10.1007/s11661-011-0740-x ↗
57. Texture analysis implementation at the neutron strain diffractometer POLDI10.1016/j.matchar.2025.115003 ↗
58. Mantid—Data analysis and visualization package for neutron scattering and μ SR experiments10.1016/j.nima.2014.07.029 ↗
59. Progress in magnetic domain observation by advanced magneto-optical microscopy10.1088/0022-3727/48/33/333001 ↗
60. Enhancement of magneto-optical domain observation by digital image processing10.1109/TMAG.1985.1064048 ↗
61. Eaton · 2010
62. Jovičević-Klug
63. Austenite reversion suppression with deep cryogenic treatment: a novel pathway towards 3rd generation advanced high-strength steels10.1016/j.msea.2023.145033 ↗
64. Insights into plastic localization by crystallographic slip from emerging experimental and numerical approaches10.1146/annurev-matsci-080921-102621 ↗
65. Surface—Subsurface grain structure relationships10.1016/j.actamat.2024.119660 ↗
66. Impact of steel type, composition and heat treatment parameters on effectiveness of deep cryogenic treatment10.1016/j.jmrt.2021.07.022 ↗
67. Cryogenic treatment:shallow and deep
68. Kumar · 2012 · vol. 2 · 3051
69. Effects of austenitizing temperature and deep cryogenic treatment on microstructural evolution and mechanical properties of a microalloyed high-carbon steel10.3390/ma19071342 ↗
70. Phase evolution in driven alloys: an overview on compositional patterning10.1016/j.jnucmat.2021.153015 ↗
71. Review on the effect of deep cryogenic treatment of metallic materials in automotive applications10.3390/met10040434 ↗
72. Effect of deep cryogenic treatment on microstructure and mechanical properties of 18Ni (200) cryogenic maraging steel10.1016/j.jmrt.2025.02.062 ↗
73. Effect of tempering time on the microstructure and properties of martensitic stainless steel10.3390/met14030322 ↗