journal article·2026-03Open access

Recent advances in 3D printing biomimetic gradient scaffolds for tendon-bone interface repair

Jinbo Zhang, Hao Chen, Xingzhen Li, Aobo Zhang, Yang Liu, Jincheng Wang, Xue Zhao, Qing Han

Abstract

Repair of tendon-bone interface (TBI) injuries remains a major clinical challenge, primarily due to the difficulty in reconstructing the native interface's complex gradient architecture. The emergence of biomimetic gradient scaffolds offers a promising solution by replicating the hierarchical organization and functional heterogeneity of the TBI within a single construct, thereby achieving both structural biomimicry and functional tissue regeneration. With its high controllability and capability for patient-specific customization, 3D printing has become a pivotal technology for the design and fabrication of such gradient scaffolds. This review first outlines the developmental process of the TBI and the characteristic features of its injury-healing mechanism, emphasizing its unique histological and biomechanical requirements. Subsequently, current 3D printing strategies applied in the fabrication of biomimetic gradient scaffolds are systematically summarized, including fused deposition modeling (FDM), selective laser sintering/melting (SLS/SLM), and bioprinting. The suitability and limitations of natural polymers, synthetic polymers, and inorganic metallic materials in scaffold fabrication are also discussed. Furthermore, this review highlights recent advances in multidimensional biomimetic design concepts such as mimicking structural and mineralization gradients, integrating bioactive factors, and employing decellularized extracellular matrix based strategies that collectively promote TBI reconstruction and functional recovery. In summary, this work provides a comprehensive overview of recent advances in 3D-printed biomimetic gradient scaffolds for TBI repair. It highlights key printing technologies, material selection principles, and biomimetic design strategies, with the aim of guiding future research and clinical translation in TBI regeneration. • 3D printing precisely recreates TBI multiscale gradients, enabling spatially controlled structural, compositional, and mechanical transitions. • Natural/synthetic polymers plus bioactive nanoparticles synergistically tune biocompatibility, degradability, and osteo-/teno-induction. • Bioprinting and 4D smart-responsive printing enable spatiotemporal control of cells and remodeling, advancing clinical TBI repair.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tendon Structure and Treatment · Shoulder Injury and Treatment · Orthopedic Surgery and Rehabilitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Risk factors for overuse shoulder injuries in a mixed-sex cohort of 329 elite handball players: previous findings could not be confirmed10.1136/bjsports-2017-097648 ↗
2. Risk factors for tear progression in symptomatic rotator cuff tears: a prospective study of 174 shoulders10.1177/0363546517709780 ↗
3. Strategies for promoting tendon-bone healing: current status and prospects
4. Stem cell therapies in tendon-bone healing
5. Current progress in tendon and ligament tissue engineering10.1007/s13770-019-00196-w ↗
6. The American society of shoulder and elbow therapists' consensus statement on rehabilitation following arthroscopic rotator cuff repair10.1016/j.jse.2015.12.018 ↗
7. Non-surgical and surgical treatments for rotator cuff disease: a pragmatic randomised clinical trial with 2-year follow-up after initial rehabilitation10.1136/annrheumdis-2020-219099 ↗
8. In vitro and in vivo evaluation of orthopedic interface repair using a tissue scaffold with a continuous hard tissue-soft tissue transition
9. Biomaterials based strategies for rotator cuff repair10.1016/j.colsurfb.2017.06.004 ↗
10. Nanofiber-based matrices for rotator cuff regenerative engineering10.1016/j.actbio.2019.05.041 ↗
11. The structure, biology, and mechanical function of Tendon/ligament-bone interfaces10.1089/ten.teb.2023.0295 ↗
12. The role of mechanobiology in the attachment of tendon to bone10.1138/20110515 ↗
13. The microstructure and micromechanics of the tendon-bone insertion10.1038/nmat4863 ↗
14. Functional attachment of soft tissues to bone: development, healing, and tissue engineering10.1146/annurev-bioeng-071910-124656 ↗
15. Enthesis tissue engineering: biological requirements meet at the interface10.1089/ten.teb.2018.0383 ↗
16. Scaffold-based tissue engineering strategies for soft-hard interface regeneration10.1093/rb/rbac091 ↗
17. Human collagen-based multilayer scaffolds for tendon-to-bone interface tissue engineering10.1002/jbm.a.35057 ↗
18. Functional grading of mineral and collagen in the attachment of tendon to bone10.1016/j.bpj.2009.05.043 ↗
19. Nanofiber scaffolds with gradations in mineral content for mimicking the tendon-to-bone insertion site
20. Stratified scaffold design for engineering composite tissues10.1016/j.ymeth.2015.03.029 ↗
21. Biomimetic scaffold design for functional and integrative tendon repair10.1016/j.jse.2011.11.016 ↗
22. A microfluidics-derived growth factor gradient in a scaffold regulates stem cell activities for tendon-to-bone interface healing10.1039/D0BM00229A ↗
23. 3D printing of multiscale biomimetic scaffold for tendon regeneration10.1002/adfm.202413970 ↗
24. 3D printing of bone tissue engineering scaffolds
25. Printability and shape fidelity of bioinks in 3D bioprinting10.1021/acs.chemrev.0c00084 ↗
26. Polymers for 3D printing and customized additive manufacturing10.1021/acs.chemrev.7b00074 ↗
27. Melt electrowriting combined with fused deposition modeling printing for the fabrication of three-dimensional biomimetic scaffolds for osteotendinous junction regeneration10.2147/IJN.S449952 ↗
28. 3D printing of bioinspired biomaterials for tissue regeneration10.1002/adhm.202000208 ↗
29. 3D bioprinted multi-layered cell constructs with gradient core-shell interface for tendon-to-bone tissue regeneration
30. 3D-printed biomimetic scaffolds loaded with ADSCs and BMP-2 for enhanced rotator cuff repair10.1039/D4TB01073F ↗
31. 3D printing of multilayered scaffolds for rotator cuff tendon regeneration
32. The 3D-Printed PLGA scaffolds loaded with bone marrow-derived mesenchymal stem cells augment the healing of rotator cuff repair in the rabbits10.1177/0963689720973647 ↗
33. A woven scaffold with continuous mineral gradients for tendon-to-bone tissue engineering
34. 3D-printed Mg-incorporated PCL-based scaffolds improves rotator cuff tendon-bone healing through regulating macrophage polarization
35. Dual cross-linked COL1/HAp bionic gradient scaffolds containing human amniotic mesenchymal stem cells promote rotator cuff tendon-bone interface healing10.1016/j.bioadv.2024.213799 ↗
36. Multicellular bioprinting of biomimetic inks for tendon-to-bone regeneration
37. Biomimetic gradient scaffolds for the tissue engineering and regeneration of rotator cuff enthesis10.1088/1758-5090/ad467d ↗
38. Structure, ingredient, and function-based biomimetic scaffolds for accelerated healing of tendon-bone interface
39. Advances in the development of gradient scaffolds made of nano-micromaterials for musculoskeletal tissue regeneration10.1007/s40820-024-01581-4 ↗
40. 4D bioprinting of programmed dynamic tissues
41. Scx+/Sox9+ progenitors contribute to the establishment of the junction between cartilage and tendon/ligament10.1242/dev.096354 ↗
42. Role of Scx+/Sox9+ cells as potential progenitor cells for postnatal supraspinatus enthesis formation and healing after injury in mice10.1371/journal.pone.0242286 ↗
43. Hedgehog signaling directs cell differentiation and plays a critical role in tendon enthesis healing10.1038/s41536-025-00392-4 ↗
44. Quantitative mapping of matrix content and distribution across the ligament-to-bone insertion10.1371/journal.pone.0074349 ↗
45. The influence of swelling and matrix degradation on the microstructural integrity of tendon10.1016/j.actbio.2006.05.008 ↗
46. Tendon functional extracellular matrix10.1002/jor.22818 ↗
47. Gdf5 progenitors give rise to fibrocartilage cells that mineralize via hedgehog signaling to form the zonal enthesis10.1016/j.ydbio.2015.06.020 ↗
48. Age-related cellular and microstructural changes in the rotator cuff enthesis10.1002/jor.25211 ↗
49. Mineralizing enthesopathy is a common feature of renal phosphate-wasting disorders attributed to FGF23 and is exacerbated by standard therapy in hyp mice10.1210/en.2012-1551 ↗
50. Canine ACL reconstruction with an injectable hydroxyapatite/collagen paste for accelerated healing of tendon-bone interface
51. Advanced strategies for constructing interfacial tissues of bone and tendon/ligament10.1177/20417314221144714 ↗
52. Orthopedic interface repair strategies based on native structural and mechanical features of the multiscale enthesis10.1021/acsbiomaterials.6b00599 ↗
53. Vascular endothelial growth factor and angiogenesis in the regulation of cutaneous wound repair10.1089/wound.2013.0517 ↗
54. Fibroblast and myofibroblast activation in normal tissue repair and fibrosis10.1038/s41580-024-00716-0 ↗
55. Tendon tissue engineering: cells, growth factors, scaffolds and production techniques10.1016/j.jconrel.2021.03.040 ↗
56. Rescue plan for achilles: therapeutics steering the fate and functions of stem cells in tendon wound healing10.1016/j.addr.2017.12.016 ↗
57. Biomimetic strategies for tendon/ligament-to-bone interface regeneration
58. Multi-omics analysis of human tendon adhesion reveals that ACKR1-regulated macrophage migration is involved in regeneration10.1038/s41413-024-00324-w ↗
59. Bone marrow mesenchymal stem cell-derived exosomes promote rotator cuff tendon-bone healing by promoting angiogenesis and regulating M1 macrophages in rats10.1186/s13287-020-02005-x ↗
60. Cellular therapy in bone-tendon interface regeneration10.4161/org.27404 ↗
61. Application and optimization of bioengineering strategies in facilitating tendon-bone healing10.1186/s12938-025-01368-7 ↗
62. Augmentation techniques for rotator cuff repairs10.2106/JBJS.RVW.25.00007 ↗
63. Tendon regeneration and scar formation: the concept of scarless healing10.1002/jor.22853 ↗
64. Decoding the mechanical characteristics of the human anterior cruciate ligament entheses through graduated mineralization interfaces10.1038/s41467-024-53542-5 ↗
65. Sustained slow-release TGF-beta3 in a three-dimensional-printed titanium microporous scaffold composite system promotes ligament-to-bone healing
66. Selective laser sintering scaffold with hierarchical architecture and gradient composition for osteochondral repair in rabbits10.1016/j.biomaterials.2017.05.021 ↗
67. Facile and rapid fabrication of a novel 3D-printable, visible light-crosslinkable and bioactive polythiourethane for large-to-massive rotator cuff tendon repair
68. Conventional and recent trends of scaffolds fabrication: a superior mode for tissue engineering10.3390/pharmaceutics14020306 ↗
69. Overview of electrospinning for tissue engineering applications10.3390/polym15112418 ↗
70. Fused deposition modelling: current status, methodology, applications and future prospects
71. Advanced optical methods and materials for fabricating 3D tissue scaffolds
72. 3D digital light process bioprinting: cutting-edge platforms for resolution of organ fabrication
73. 3D bioprinting for tendon-bone interface regeneration10.36922/ijb.8411 ↗
74. 3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering10.1088/2631-7990/acd88f ↗
75. 3D-printed composite scaffold with gradient structure and programmed biomolecule delivery to guide stem cell behavior for osteochondral regeneration10.1016/j.bioadv.2022.213067 ↗
76. 3D-Printed PCL scaffolds loaded with bFGF and BMSCs enhance tendon-bone healing in rat rotator cuff tears by immunomodulation and osteogenesis promotion10.1021/acsbiomaterials.4c02340 ↗
77. Promotion of tendon growth into implant through pore-size design of a Ti-6Al-4 V porous scaffold prepared by 3D printing
78. Bioprinted living tissue constructs with layer-specific, growth factor-loaded microspheres for improved enthesis healing of a rotator cuff10.1016/j.actbio.2022.10.058 ↗
79. Ultrasound-controlled delivery of growth factor-loaded cerasomes combined with polycaprolactone scaffolds seeded with bone marrow mesenchymal stem cells for biomimetic tendon-to-bone interface engineering10.1021/acsami.3c14959 ↗
80. Development of new metal/polymer materials for rapid tooling using fused deposition modelling10.1016/j.matdes.2004.02.009 ↗
81. Design and 3D printing of scaffolds and tissues10.15302/J-ENG-2015061 ↗
82. Physical and mechanical properties of PLA, and their functions in widespread applications - a comprehensive review10.1016/j.addr.2016.06.012 ↗
83. The return of a forgotten polymer—Polycaprolactone in the 21st century10.1016/j.progpolymsci.2010.04.002 ↗
84. Fabrication and characterization of porous polycaprolactone scaffold via extrusion-based cryogenic 3D printing for tissue engineering10.1016/j.matdes.2019.107946 ↗
85. Multimaterial and multiscale scaffold for engineering enthesis organ10.18063/ijb.763 ↗
86. Biomimetic structural design in 3D-printed scaffolds for bone tissue engineering
87. 3D printed macroporous scaffolds of PCL and inulin-g-P(D,L)LA for bone tissue engineering applications10.1016/j.ijpharm.2023.123093 ↗
88. 3D-Printed polycaprolactone/hydroxyapatite bionic scaffold for bone regeneration10.3390/polym17070858 ↗
89. 3D-Printed functionally graded PCL-HA scaffolds with multi-scale porosity10.1021/acsomega.4c06820 ↗
90. Fused deposition modeling: process, materials, parameters, properties, and applications10.1007/s00170-022-08860-7 ↗
91. Laser sintering approaches for bone tissue engineering10.3390/polym14122336 ↗
92. Surface roughness and biocompatibility of polycaprolactone bone scaffolds: an energy-density-guided parameter optimization for selective laser sintering10.3389/fbioe.2022.888267 ↗
93. Lithography-based 3D printing of hydrogels10.1038/s44222-024-00251-9 ↗
94. 3D/4D printing of polymers: fused deposition modelling (FDM), selective laser sintering (SLS), and stereolithography (SLA)10.3390/polym13183101 ↗
95. A review on voids of 3D printed parts by fused filament fabrication10.1016/j.jmrt.2021.10.108 ↗
96. Effect of a homogeneous recrystallized microstructure and a bimodal microstructure on mechanical properties in Mg-5Zn-0.6Zr alloys
97. Microstructure and mechanical properties of selective laser melted magnesium10.1016/j.apsusc.2011.03.004 ↗
98. Porous tantalum structure integrated on Ti6Al4V base by laser powder bed fusion for enhanced bony-ingrowth implants: in vitro and in vivo validation
99. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties10.1016/j.pmatsci.2015.03.002 ↗
100. Prediction and control of structured porosity in laser powder bed fusion (LPBF) additive manufacturing using multi-scale modeling