journal article·2025-12Open access

Force transmission and dissipation in dynamic compression of architected metamaterials

T. Gärtner, S.J. van den Boom, J. Weerheijm, L.J. Sluys

Abstract

Materials engineered with an internal architecture in order to achieve unusual properties, so-called mechanical metamaterials, are a promising candidate in the ongoing quest for lightweight impact mitigation. During impact events, these materials are subject to high strain rates, and the forces occurring due to the deceleration of the impactor are transmitted in a non-uniform way. The prevailing research in the field of impact mitigation focuses largely on the global effects of architected materials, with less attention being paid to the internal mechanisms of these structured materials. While there have been recent studies on the distribution of forces throughout an impact event, less research is devoted to the transmission of forces and the distribution of energy dissipation. The objective of this study is to examine the transition from static deformation patterns to dynamic phenomena for different types and sizes of microstructure, and to understand both the force transmission through the patch and the energetic distributions in different strain rate regimes. To enable this investigation discretized — geometrically as well as materially — nonlinear Timoshenko-Ehrenfest beams are used in implicit and explicit finite element schemes. The transmitted force levels and energy dissipation are investigated for two auxetic architectures (one for each mechanism resulting in a negative Poisson’s ratio) and one non-auxetic architecture. The dynamic force levels transmitted to the back face exhibit an initial peak of a similar magnitude for all investigated strain rates and stabilize to the static stress plateau for each architecture. While the global amount of potential energy remains largely unchanged for all investigated rates, the amount of dissipation and kinetic energy demonstrates a non-linear increase from static deformation to slow and high rate deformation. The phenomena observed in different architectures are highlighted, and the differences are explained and related back to the configurations of the lattices. Notably, the prevalent notion in literature asserting the superiority of negative Poisson’s ratio materials for impact mitigation applications is not replicated in this study. • Dynamic compression of lattice metamaterials modelled with geometrically exact beams. • Comparison of negative and positive Poisson’s ratio materials in dynamic compression. • Dynamic force transmission is dominated by the microstructure and inertia effects. • A positive Poisson’s ratio results in a higher specific energy absorption.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Structural Response to Dynamic Loads · Nonlocal and gradient elasticity in micro/nano structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Mechanical metamaterials and beyond10.1038/s41467-023-41679-8 ↗
2. Computational design of mechanical metamaterials10.1038/s43588-024-00672-x ↗
3. Enabling three-dimensional architected materials across length scales and timescales10.1038/s41563-025-02119-8 ↗
4. Auxetic materials for sports applications10.1016/j.proeng.2014.06.079 ↗
5. Assessing the risk of orbital debris impact10.1023/A:1010066300520 ↗
6. Prediction of extent of damage to metal roof panels under hail impact10.1016/j.engstruct.2019.02.036 ↗
7. Study on the performance of energy absorption structure of bridge piers against vehicle collision10.1016/j.tws.2018.05.008 ↗
8. Body armour - new materials, new systems10.1016/j.dt.2019.02.002 ↗
9. Anti-blast and -impact performances of auxetic structures: A review of structures, materials, methods, and fabrications10.1016/j.engstruct.2022.115377 ↗
10. Auxetic materials for personal protection: A review10.1002/pssb.202200324 ↗
11. Auxetic metamaterials and structures: a review10.1088/1361-665X/aaa61c ↗
12. Three decades of auxetics research – materials with negative Poisson’s ratio: A review10.1002/adem.201600053 ↗
13. On local indentation and impact compliance of isotropic auxetic materials from the continuum mechanics viewpoint10.1016/j.ijengsci.2012.01.010 ↗
14. Non-linear properties of metallic cellular materials with a negative Poisson’s ratio10.1007/BF02403846 ↗
15. Fracture toughness of re-entrant foam materials with a negative Poisson’s ratio: experiment and analysis10.1007/BF00036481 ↗
16. Low-velocity impact response of multilayer orthogonal structural composite with auxetic effect10.1016/j.compstruct.2016.10.018 ↗
17. Impact dynamic response of stiffened porous functionally graded materials sandwich doubly-curved shells with arc-type auxetic core10.1016/j.ijimpeng.2024.105000 ↗
18. 3D lightweight double arrow-head plate-lattice auxetic structures with enhanced stiffness and energy absorption performance10.1016/j.compstruct.2022.115484 ↗
19. Mechanical response and failure modes of three-dimensional auxetic re-entrant LPBF-manufactured steel truss lattice materials10.1115/1.4065669 ↗
20. Effect of damage evolution on the auxetic behavior of 2D and 3D re-entrant type geometries10.1016/j.mechmat.2024.104980 ↗
21. The dynamic response of composite auxetic re-entrant honeycomb structure subjected to underwater impulsive loading10.1016/j.ijimpeng.2024.104999 ↗
22. In-plane dynamic crushing of re-entrant auxetic cellular structure10.1016/j.matdes.2016.03.086 ↗
23. Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: Experimental tests and numerical simulations10.1016/j.compstruct.2017.08.020 ↗
24. Farshbaf · 2025
25. Geometric effects on impact mitigation in architected auxetic metamaterials10.1016/j.mechmat.2024.104952 ↗
26. Graph-based metamaterials: Deep learning of structure–property relations10.1016/j.matdes.2022.111175 ↗
27. Non-symmetric plate-lattices: Recurrent neural network-based design of optimal metamaterials10.1016/j.actamat.2024.120246 ↗
28. A review of the manufacture, mechanical properties and potential applications of auxetic foams10.1002/pssb.201248550 ↗
29. (in)efficacy of architected auxetic materials for impact mitigation10.1016/j.ijimpeng.2025.105402 ↗
30. Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure10.1016/0020-7403(84)90021-3 ↗
31. In-plane dynamic crushing of honeycombs-a finite element study10.1016/S0734-743X(02)00056-8 ↗
32. A characteristic length scale causes anomalous size effects and boundary programmability in mechanical metamaterials10.1038/nphys4269 ↗
33. Buckle-barrel correspondence based on topological polarization conversion in mechanical metamaterials
34. The mechanics of two-dimensional cellular materials
35. A novel mechanism for generating auxetic behaviour in reticulated foams: missing rib foam model10.1016/S1359-6454(00)00269-X ↗
36. Dynaflow Research Group · 2021
37. On finite deformations of space-curved beams10.1007/BF00946983 ↗
38. A finite strain beam formulation, the three-dimensional dynamic problem. part I10.1016/0045-7825(85)90050-7 ↗
39. A thermoelastoplastic theory for special cosserat rods
40. A strategy for scaling the hardening behavior in finite element modelling of geometrically exact beams10.1007/s00466-024-02572-3 ↗
41. Geometrically exact elastoplastic rods: determination of yield surface in terms of stress resultants10.1007/s00466-020-01957-4 ↗
42. Two-scale off-and online approaches to geometrically exact elastoplastic rods10.1007/s00466-022-02204-8 ↗
43. A three-dimensional finite-strain rod model. part II: Computational aspects10.1016/0045-7825(86)90079-4 ↗
44. Objectivity of strain measures in the geometrically exact three-dimensional beam theory and its finite-element implementation10.1098/rspa.1999.0352 ↗
45. A note on tangent stiffness for fully nonlinear contact problems10.1002/cnm.1630010503 ↗
46. Numerical integration of ordinary differential equations10.1080/00029890.1926.11986619 ↗
47. Munthe-Kaas · 2015 · 787
48. Interpenetrating lattices with enhanced mechanical functionality
49. Structural metamaterials with innate capacitive and resistive sensing10.1007/s10853-024-10097-6 ↗
50. Compressive properties of aperiodic but ordered cellular materials inspired by penrose tilings10.1016/j.tws.2024.112287 ↗
51. Enhanced deformability through distributed buckling in stiff quasicrystalline architected materials10.1002/adma.202505125 ↗
52. 2024
53. Crameri · 2023