3D printing of multicomponent polymeric inks enables hierarchical hybrid architectures for bone tissue regeneration
Source abstract
Abstract
Bone defects arising due to trauma, disease, or surgical resections continue to constitute serious clinical challenges, demanding more advanced and customizable solutions that not only ensure structural stability, but also replicate the anisotropy and biomimetic complexity of the native bone tissue. In this context, we present a solution that is based on 3D printed scaffolds made of gellan gum (GG) and cellulose nanofibrils (CNFs), reinforced with electrospun chitosan/polyethylene oxide nanofibers (NFs). First, we optimized the base ink by selecting the proper GG/CNFs ratio as 3/1 after evaluating its rheological properties, printability, and scaffold morphology. Next, various concentrations of NFs (0.5, 1, 2, and 4 wt%) were added to the base ink, and the resulting formulations were again evaluated in terms of rheology and printability, while the subsequent printed scaffolds were investigated by scanning electron microscopy and micro-computed tomography, showing a well-organized internal architecture with interconnected pores and improved volumetric fidelity, especially for 2 % NFs addition (GCN-2.0), which recorded the highest total porosity (90.7 %). Structural characterization confirmed the successful integration of NFs within the polymeric matrix, while nanomechanical indentation revealed an increase in storage modulus (72.5 kPa for GCN-2.0) compared to the control (47.5 kPa) and also mechanical anisotropy due to filament orientation and NFs alignment within the printed structures. In vitro swelling and degradation studies showed the highest increase in water uptake capacity and long-term stability (up to 12 weeks) for GCN-2.0, while biological evaluation demonstrated good cytocompatibility with MG-63 cells for all samples and increased mineralization in the scaffolds with higher NFs content. Overall, the results indicate that 2 % NFs reinforcement constitutes the ideal balance between printability, nanomechanical properties, and biological response, indicating a great potential for this hybrid formulation to be used successfully in bone tissue engineering. • Developed gellan-gum/cellulose nanofibrils scaffolds reinforced with electrospun chitosan/polyethylene oxide nanofibers. • Nanofibers addition tailored rheology, print fidelity, and pore interconnectivity. • Achieved tunable swelling and degradation via nanofibers concentration control. • Morpho-structural characterization revealed optimal properties for scaffolds with 2 % nanofibers reinforcement. • 3D printed scaffolds enhanced cell adhesion and proliferation for bone repair.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Electrospun Nanofibers in Biomedical Applications · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Current trends and future prospects of integrating electrospinning with 3D printing techniques for mimicking bone extracellular matrix scaffolds10.1002/pol.20241010 ↗
2. 3D printing of cellulase-laden cellulose nanofiber/chitosan hydrogel composites: towards tissue engineering functional biomaterials with enzyme-mediated biodegradation10.3390/ma15176039 ↗
3. Biomechanical, biophysical and biochemical modulators of cytoskeletal remodelling and emergent stem cell lineage commitment10.1038/s42003-022-04320-w ↗
4. Effect of polymeric matrix stiffness on osteogenic differentiation of mesenchymal stem/progenitor cells: concise review10.3390/polym13172950 ↗
5. Harnessing mechanical cues in the cellular microenvironment for bone regeneration
6. The decisive early phase of bone regeneration10.1038/s41584-022-00887-0 ↗
7. Current status in the utilization of biobased polymers for 3D printing process: a systematic review of the materials, processes, and challenges10.1021/acsabm.0c01379 ↗
8. Sultan · 2022
9. Nanostructured gelatin-gellan inks double reinforced with cellulose nanofibrils and graphene derivatives for 3D printing in bone regeneration applications
10. Nanofibrous material-reinforced printable ink for enhanced cell proliferation and tissue regeneration10.3390/bioengineering11040363 ↗
11. Development of bioinspired functional chitosan/cellulose nanofiber 3D hydrogel constructs by 3D printing for application in the engineering of mechanically demanding tissues10.3390/polym13101663 ↗
12. Electrospun nanofiber/hydrogel composite materials and their tissue engineering applications10.1016/j.jmst.2023.04.015 ↗
13. Leveraging printability and biocompatibility in materials for printing implantable vessel scaffolds
14. A review of the current state of the art in gelatin methacryloyl-based printing inks in bone tissue engineering10.1080/17452759.2024.2378003 ↗
15. Self-mineralizing Ca-enriched methacrylated gellan gum beads for bone tissue engineering10.1016/j.actbio.2019.01.053 ↗
16. Two-step crosslinking to enhance the printability of methacrylated gellan gum biomaterial ink for extrusion-based 3D bioprinting10.1016/j.bprint.2021.e00185 ↗
17. Modified gellan gum hydrogels for tissue engineering applications10.1039/c3sm27389j ↗
18. 3D printed gellan gum/graphene oxide scaffold for tumor therapy and bone reconstruction10.1016/j.compscitech.2021.108763 ↗
19. Molten stringing 3D printed microfibrous net-integrated mineralized hydrogels with tunable micromechanical and cell-responsive properties10.1039/D5TB00449G ↗
20. Applicability of hydrogels as platforms for bone regeneration: a mini-review10.1002/pat.70336 ↗
21. Hydrogel-based scaffolds: advancing bone regeneration through tissue engineering10.3390/gels11030175 ↗
22. Dual nanofiber and graphene reinforcement of 3D printed biomimetic supports for bone tissue repair10.1039/D4RA06167E ↗
23. Graphene oxide coated three-dimensional printed biphasic calcium phosphate scaffold for angiogenic and osteogenic synergy in repairing critical-size bone defect10.1016/j.jmst.2022.10.016 ↗
24. Graphene toxicity and future perspectives in healthcare and biomedicine10.1016/j.flatc.2022.100417 ↗
25. Synthesis and characterization of electrospun composite scaffolds based on chitosan-carboxylated graphene oxide with potential biomedical applications10.3390/ma14102535 ↗
26. An osteogenic bioink composed of alginate, cellulose nanofibrils, and polydopamine nanoparticles for 3D bioprinting and bone tissue engineering10.1016/j.ijbiomac.2022.02.012 ↗
27. The effect of 3D hydrogel scaffold modulus on osteoblast differentiation and mineralization revealed by combinatorial screening10.1016/j.biomaterials.2010.03.024 ↗
28. 3D printing of complex GelMA-based scaffolds with nanoclay10.1088/1758-5090/ab0cf6 ↗
29. 3D-printed bioactive and biodegradable hydrogel scaffolds of alginate/gelatin/cellulose nanocrystals for tissue engineering10.1016/j.ijbiomac.2020.12.011 ↗
30. Nano-biomaterials for designing functional bioinks towards complex tissue and organ regeneration in 3D bioprinting
31. Microbial exopolysaccharides: resources and bioactive properties10.1016/j.procbio.2018.06.009 ↗
32. Nanofibrillated cellulose/gellan gum hydrogel-based bioinks for 3D bioprinting of skin cells10.1016/j.ijbiomac.2022.12.227 ↗
33. Design of drug-loaded 3D printing biomaterial inks and tailor-made pharmaceutical forms for controlled release10.1016/j.ijpharm.2021.121124 ↗
34. Correlating rheological properties of a gellan gum-based bioink: a study of the impact of cell density10.3390/polym14091844 ↗
35. Freeze-dryable inks combining chitosan nanofibers and hyaluronic acid for extrusion bioprinting10.1016/j.ijbiomac.2025.146679 ↗
36. Silk fibroin nanofibers: a promising ink additive for extrusion three-dimensional bioprinting
37. Preparation of electrospun chitosan/poly(ethylene oxide) composite nanofibers reinforced with cellulose nanocrystals: structure, morphology, and mechanical behavior10.1016/j.compscitech.2019.107774 ↗
38. A fundamental study of chitosan/PEO electrospinning10.1016/j.polymer.2011.08.034 ↗
39. Demicellization of polyethylene oxide in water solution under static magnetic field exposure studied by FTIR spectroscopy10.1155/2013/485865 ↗
40. Electrospun kaolin-loaded chitosan/PEO nanofibers for rapid hemostasis and accelerated wound healing10.1016/j.ijbiomac.2022.07.186 ↗
41. Plasticized biopolymer electrolyte membranes based on gellan gum-MeSO4Na: structural, thermal and electrical transport properties study10.1007/s10854-025-14514-7 ↗
42. Advancing peripheral nerve regeneration: 3D bioprinting of GelMA-Based cell-laden electroactive bioinks for nerve conduits10.1021/acsbiomaterials.3c01226 ↗
43. Superabsorbent hydrogel composite made of cellulose nanofibrils and chitosan-graft-poly(acrylic acid)10.1016/j.carbpol.2011.10.017 ↗
44. Rational design of hydrogels to enhance osteogenic potential10.1021/acs.chemmater.0c03018 ↗
45. Gelatin/Sodium alginate composite hydrogel with dynamic matrix stiffening ability for bone regeneration10.1016/j.compositesb.2022.110162 ↗
46. Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration10.1038/s41368-020-0073-y ↗
47. Polycaprolactone/graphene oxide/magnesium oxide as a novel composite scaffold for bone tissue engineering: preparation and physical/biological assessment
48. Three-dimensional porous polycaprolactone/chitosan/bioactive glass scaffold for bone tissue engineering10.1080/09205063.2024.2391218 ↗
49. Fabrication and characterization of a bioactive composite scaffold based on polymeric collagen/gelatin/nano β-TCP for alveolar bone regeneration10.1016/j.jmbbm.2024.106500 ↗
50. Influence of chitosan and hydroxyapatite incorporation on properties of electrospun PVA/HA nanofibrous mats for bone tissue regeneration: nanofibers optimization and in-vitro assessment
51. Diatom-guided bone healing via a hybrid natural scaffold10.1016/j.heliyon.2024.e25878 ↗
52. Enhancing the printability of low-concentration GelMA through viscosity modulation and integration of hydroxyapatite for bone tissue engineering bioinks10.1016/j.bprint.2025.e00426 ↗
53. Fabrication of biodegradable nanocomposite scaffolds with hydroxyapatite, magnetic clay, and graphene oxide for bone tissue engineering10.1038/s41598-025-07270-5 ↗
54. Fabrication, physicochemical characterization and in vitro evaluation of pre-osteoblast cells on bacterial cellulose/hydroxyapatite reinforced with chitosan composite scaffold for bone tissue engineering10.1016/j.ijbiomac.2025.148779 ↗
55. In search of an osteoblast cell model for in vitro research10.22203/eCM.v024a01 ↗
56. A phenotypic comparison of osteoblast cell lines versus human primary osteoblasts for biomaterials testing10.1002/jbm.a.34937 ↗
57. Distinctions in bone matrix nanostructure, composition, and formation between osteoblast-like cells, MG-63, and human mesenchymal stem cells, UE7T-1310.1016/j.heliyon.2023.e15556 ↗
58. The toxic effect of ALLN on primary rat retinal neurons10.1007/s12640-016-9624-6 ↗
59. Biocompatible dually reinforced gellan gum hydrogels with selective antibacterial activity10.1016/j.carbpol.2024.123071 ↗
60. Injectable gellan gum hydrogel with PLGA-LDH microspheres for controlled alendronate release and bone regeneration10.1016/j.ijbiomac.2025.146092 ↗
61. Biomimetic gellan gum hybrid hydrogels for extracellular matrix simulation in mouse embryonic stem cell culture10.1007/s40846-025-00970-3 ↗
62. Biomineralization of recombinant peptide scaffolds: interplay among chemistry, architecture, and mechanics10.1021/acsbiomaterials.7b00175 ↗
63. 3D biomimetic magnetic structures for static magnetic field stimulation of osteogenesis10.3390/ijms19020495 ↗
64. Cell energy metabolism and bone formation
65. Mineralization of bone extracellular matrix-like scaffolds fabricated as silk sericin-functionalized dense collagen–fibrin hybrid hydrogels10.3390/pharmaceutics15041087 ↗
66. Physiological mineralization during in vitro osteogenesis in a biomimetic spheroid culture model10.3390/cells11172702 ↗
67. Synthetic scaffolds for musculoskeletal tissue engineering: cellular responses to fiber parameters10.1038/s41536-019-0076-5 ↗