Effect of π-bridges on the performance of indeno[1,2-b]fluorene-based non-fullerene small molecular acceptors
Source abstract
Abstract
Abstract Two non-fullerene acceptors based on the indeno[1,2-b]fluorene central moiety, with selenophene or 2-vinylselenophene as π-bridges and 2-(5,6-difuoro-3-oxo-2,3- dihydro-1H-inden-1-ylidene)malononitrile as end-capping groups, i.e. FICBF-Se and FICBF-SeVi, were synthesized, and the structure-property relationships of the acceptors were systematically studied. The introduction of the vinylene group led to clearly redshifted and broader absorption and a smaller bandgap. FICBF-Se and FICBF-SeVi exhibited optical bandgaps of 1.68 and 1.54 eV, respectively. Solar cells using polymer PBDB-T as a donor and FICBF-Se as an acceptor demonstrated a power conversion efficiency (PCE) of 6.25% with a short-circuit current density (Jsc) of 11.61 mA cm−2. However, the device based on PBDB-T/FICBF-SeVi only delivered a PCE of 3.63% with a Jsc of 9.08 mA cm−2, which should be mainly because the vinylene group decreased the crystallinity and its active layer morphology showed no distinct phase separation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Fullerene Chemistry and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
2. Small molecular weight organic thin-film photodetectors and solar cells10.1063/1.1534621 ↗
3. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
4. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
5. Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells10.1039/C7CS00892A ↗
6. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
7. Design, Synthesis, and structural characterization of the first dithienocyclopentacarbazole-based n-type organic semiconductor and its application in non-fullerene polymer solar cells10.1039/C7TA01143A ↗
8. Design of nonfullerene acceptors with near-infrared light absorption capabilities
9. Small-Molecule acceptor based on the heptacyclic benzodi(cyclopentadithiophene) unit for highly efficient nonfullerene organic solar cells10.1021/jacs.7b01170 ↗
10. An A–D–A′–D–A type small molecule acceptor with wide absorption spectrum and near-infrared absorption10.1039/C8QM00441B ↗
11. New indolo carbazole based non-fullerene n-type semiconductors for organic solar cell applications10.1039/C8TC05318A ↗
12. Asymmetrical ladder‐type donor‐induced polar small molecule acceptor to promote fill factors approaching 77% for high-performance nonfullerene polymer solar cells
13. Design of a new fused-ring electron acceptor with excellent compatibility to wide‐bandgap polymer donors for high-performance organic photovoltaics10.1002/adma.201800403 ↗
14. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
15. Incorporating silicon bridging atom to construct small-molecule acceptor for efficient nonfullerene polymer solar cells10.1039/C8TC04883E ↗
16. Energy-level modulation of non-fullerene acceptors to achieve high-efficiency polymer solar cells at a diminished energy offset10.1039/C7TA01554B ↗
17. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors
18. A chlorinated low-bandgap small-molecule acceptor for organic solar cells with 14.1% efficiency and low energy loss10.1007/s11426-018-9334-9 ↗
19. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
20. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
21. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor
22. A Highly efficient non-fullerene organic solar cell with a fill factor over 0.80 enabled by a fine-tuned hole-transporting layer
23. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
24. Polymer donors for high-performance non-fullerene organic solar cells10.1002/anie.201806291 ↗
25. Morphology control enables efficient ternary organic solar cells10.1002/adma.201803045 ↗
26. Insertion of chlorine atoms onto π-bridges of conjugated polymer enables improved photovoltaic performance10.1016/j.nanoen.2019.01.039 ↗
27. Ladder-type nonacyclic arene bis(thieno[3,2-b]thieno)cyclopentafluorene as a promising building block for non-fullerene acceptors
28. PDI derivative through fine-tuning the molecular structure for fullerene-free organic solar cells10.1021/acsami.7b08282 ↗
29. A nonfullerene acceptor utilizing a novel asymmetric multifused-ring core unit for highly efficient organic solar cells10.1039/C8TC01229F ↗
30. The influence of the π-bridging unit of fused-ring acceptors on the performance of organic solar cells10.1039/C8TA08410F ↗
31. Alkoxythiophene and alkylthiothiophene π-bridges enhance the performance of A-D-A electron acceptors
32. Efficient semitransparent solar cells with high NIR responsiveness enabled by a small-bandgap electron acceptor10.1002/adma.201606574 ↗
33. Nonfullerene acceptors based on extended fused rings flanked with benzothiadiazolylmethylenemalononitrile for polymer solar cells10.1039/C5TA05901A ↗
34. Near-infrared absorbing non-fullerene acceptors with selenophene as π bridge for efficient organic solar cells10.1039/C8TA00783G ↗
35. Selenophene based benzodithiophene polymers as potential candidates for optoelectronic applications10.1016/j.dyepig.2017.11.026 ↗
36. Synthesis of a 4,9-didodecyl angular-shaped naphthodiselenophene building block to achieve high-mobility transistors10.1021/acs.chemmater.6b02042 ↗
37. Selenium-containing medium bandgap copolymer for bulk heterojunction polymer solar cells with high efficiency of 9.8%10.1021/acs.chemmater.7b00729 ↗
38. Effects of selenium substitution on optical, electrochemical, and photovoltaic properties of oxindole-based π-conjugated polymers10.1016/j.orgel.2018.10.021 ↗
39. Location and number of selenium atoms in two-dimensional conjugated polymers affect their band-gap energies and photovoltaic performance10.1021/ma501720k ↗
40. Synthesis and photovoltaic properties of a series of narrow bandgap organic semiconductor acceptors with their absorption edge reaching 900 nm10.1021/acs.chemmater.7b03928 ↗
41. Insertion of double bond π-bridges of A-D-A acceptors for high performance near-infrared polymer solar cells10.1039/C7TA07049G ↗
42. Large quadratic hyperpolarizabilities with donor–acceptor polyenes exhibiting optimum bond length alternation: correlation between structure and hyperpolarizability10.1002/chem.19970030717 ↗
43. Alkyl side-chain and fluorination engineering in the indeno[1,2-b]fluorene-based small-molecule acceptors for efficient non-fullerene organic solar cells10.1016/j.dyepig.2018.08.039 ↗
44. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
45. Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells10.1039/c4ee00022f ↗