New approach by electrospray technique to prepare a gas diffusion layer for the proton exchange membrane fuel cell anode
Source abstract
Abstract
The performance of the electrospray technique was applied to obtain a gas diffusion layer (GDL) for a proton exchange membrane fuel cell. It was confirmed by confocal microscopy that polytetrafluorethylene (PTFE) was impregnated into the backbone, forming a dispersed layer of microscopic size homogeneously distributed over the substrate. The PTFE layer was characterized by infrared spectroscopy and thermogravimetric analysis. In this work, we demonstrated that the use of the GDL prepared by electrospray increases the maximum power of the H2/O2 fuel cell by about 10% and decreases the diffusion loss of the electrode owing to a better distribution characteristic hydrophobic coating with low impedance to gas diffusion. Thus, our method is promising for the development of fuel cells by the production of diffusion layers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Electrochemical Analysis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance10.1016/j.fuel.2010.09.003 ↗
2. The impact of sample size on transport properties of carbon-paper and carbon-cloth GDLs: direct simulation using the lattice Boltzmann model10.1016/j.ijheatmasstransfer.2017.11.003 ↗
3. Morphological characteristics of PTFE bonded gas diffusion electrodes10.1016/0013-4686(91)85314-W ↗
4. Fabrication and evolution of catalyst-coated membranes by direct spray deposition of catalyst ink onto Nafion membrane at high temperature10.1016/j.ijhydene.2009.05.049 ↗
5. Effect of PTFE contents in the gas diffusion media on the performance of PEMFC10.1016/j.jpowsour.2003.12.037 ↗
6. Preparing gas-diffusion layers of PEMFCs with a dry deposition technique10.1149/1.1854119 ↗
7. Can PTFE coating of gas diffusion layer improve the performance of URFCs in fuel cell-mode?10.1016/j.egypro.2019.02.208 ↗
8. PEMFC purging at low operating temperatures
9. A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC10.1016/j.jpowsour.2003.12.039 ↗
10. Impact of PTFE distribution across the GDL on the water droplet removal from a PEM fuel cell electrode containing binder10.1016/j.ijhydene.2018.06.111 ↗
11. Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells10.1016/S0013-4686(98)00125-X ↗
12. In situ spectroscopy studies of ethanol oxidation reaction using a single fuel cell/ATR-FTIR setup10.1016/j.ijhydene.2013.06.026 ↗
13. Superhydrophobic electrosprayed PTFE10.1016/j.surfcoat.2007.05.012 ↗
14. Composite SiOx/fluorocarbon plasma polymer films prepared by r.f. magnetron sputtering of SiO2 and PTFE10.1016/j.vacuum.2006.02.007 ↗
15. Effect of PTFE content in gas diffusion layer based on Nafion®/PTFE membrane for low humidity proton exchange membrane fuel cell10.1016/j.jtice.2011.05.008 ↗
16. Study on the characteristics of GDL with different PTFE content and its effect on the performance of PEMFC10.1016/j.ijheatmasstransfer.2018.09.097 ↗
17. Catalyst layers for proton exchange membrane fuel cells prepared by electrospray deposition on Nafion membrane10.1016/j.jpowsour.2010.09.096 ↗