Double-hydrogen-bond solid additives to improve morphology, efficiency and stability of fullerene OSCs
Source abstract
Abstract
Abstract Active layer morphology of organic solar cells (OSCs) is crucial to improve device properties. In this work, a strategy of solid additives in active layer is proposed to inhibit the adverse effects of DIO, improve morphology and power conversion efficiency (PCE) in fullerene OSCs. For this purpose, a novel type of solid additives with double-hydrogen-bond (2H-bond) character was primarily designed and synthesized. These 2H-bond solid additives are 2H-TR, 2H-TC6R, 2H-TCi8R and 2H-TOC8R, which contain two rhodanine terminal groups and a substituted thiophene core. The effect of the added 2H-bond solid additives on absorption and morphology of photoactive layer, as well as PCE and stability of fullerene OSCs was studied. In the PTB7-Th/PC60BM/3.0 wt% DIO blend system, it is found that the absorption was enhanced and morphology was improved while a few 2H-bond solid additives were added, especially after heating at 100 °C for 120 min. As a result, the PTB7-Th/PC60BM/3.0 wt% DIO-based devices further exhibited a significantly increasing stability and an improved PCE of 7.18% processed by 1.0 wt% 2H-TOC8R. Here, the stability is promoted from 0 to 120 min at 100 °C and the PCE value is increased by 19.3% in comparison to that in the original devices without any process. This work indicates that 2H-bond solid additives are promising additives used to achieve high-performance and stability fullerene OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Fullerene Chemistry and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Simple-structured NIR-absorbing small-molecule acceptors with a thiazolothiazole core: multiple noncovalent conformational locks and D−A effect for efficient OSCs10.1021/acsami.9b16686 ↗
2. Side-chain engineering of A-D-D-A-type small-molecule electron acceptors for high-performance polymer solar cells with Jsc exceeding 22 mA cm-210.1016/j.dyepig.2020.108581 ↗
3. Significantly enhancing the efficiency of a new light-harvesting polymer with alkylthio naphthyl substituents compared to their alkoxyl analogs10.1002/aenm.201702489 ↗
4. A novel wide-bandgap small molecule donor for high efficiency all-small-molecule organic solar cells with small non-radiative energy losses10.1039/C9EE04199K ↗
5. Functional transformation of four-bladed perylene propellers utilizing non-metal and d8 metal core shifting strategy: significant impact on photovoltaic performance and electrocatalytic hydrogen evolution activity10.1039/D0TA00506A ↗
6. Solution-processed polymer solar cells with over 17% efficiency enabled by an iridium complexation approach10.1002/aenm.202000590 ↗
7. Structure evolution from D-A-D type small molecule toward D-A-D-A-D type oligomer for high-efficiency photovoltaic donor materials
8. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
9. Heptacyclic S, N-heteroacene-based near-infrared nonfullerene acceptor enables high-performance organic solar cells with small highest occupied molecular orbital offsets10.1021/acsami.0c19033 ↗
10. Tailoring regioisomeric structures of π-conjugated polymers containing monofluorinated π-bridges for highly efficient polymer solar cells10.1021/acsenergylett.0c00939 ↗
11. Altering alkyl-chains branching positions for boosting the performance of small-molecule acceptors for highly efficient nonfullerene organic solar cells10.1007/s11426-019-9670-2 ↗
12. Eco-compatible solvent-processed organic photovoltaic cells with over 16% efficiency10.1002/adma.201903441 ↗
13. Subtle molecular tailoring induces significant morphology optimization enabling over 16% efficiency organic solar cells with efficient charge generation10.1002/adma.201906324 ↗
14. High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder10.1038/s41566-019-0573-5 ↗
15. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
16. A 2.16 eV bandgap polymer donor gives 16% power conversion efficiency10.1016/j.scib.2019.11.030 ↗
17. Thiolactone copolymer donor gifts organic solar cells a 16.72% efficiency10.1016/j.scib.2019.10.002 ↗
18. 18% efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
19. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene
20. Impact of thermal annealing on organic photovoltaic cells using regioisomeric donor-acceptor-acceptor molecules10.1021/acsami.7b05304 ↗
21. Investigation of morphological degradation of P3HT:PCBM bulk heterojunction films exposed to long-term host solvent vapor10.1039/C5TA09873D ↗
22. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methano fullerenes10.1002/adfm.200600624 ↗
23. Efficiency enhancements in non-fullerene acceptor-based organic solar cells by post-additive soaking10.1039/C9TA00468H ↗
24. Structural order in bulk heterojunction films prepared with solvent additives10.1002/adma.201003690 ↗
25. Effects of additives on the morphology of solution phase aggregates formed by active layer components of high-efficiency organic solar cells10.1021/ja2085564 ↗
26. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
27. Synergistic effect of processing additives and optical spacers in bulk-heterojunction solar cells10.1002/aenm.201200311 ↗
28. Bulk heterojunction solar cells: a mechanistic understanding of processing additive-induced efficiency enhancement in bulk heterojunction organic solar cells10.1002/adma.201303622 ↗
29. Effects of high-boiling-point additive 2-bromonaphthalene on polymer solar cells fabricated in ambient air10.1007/s00289-017-1971-9 ↗
30. Absolute measurement of domain composition and nanoscale size distribution explains performance in PTB7: PC71BM solar cells10.1002/aenm.201200377 ↗
31. Solvent-morphology-property relationship of PTB7:PC71BM polymer solar cells10.1021/acsami.6b14926 ↗
32. Composition-morphology correlation in PTB7-Th/PC71BM blend films for organic solar cells10.1021/acsami.8b20316 ↗
33. In-operando study of the effects of solvent additives on the stability of organic solar cells based on PTB7-Th:PC71BM10.1021/acsenergylett.8b02311 ↗
34. Conflicted effects of a solvent additive on PTB7:PC71BM bulk heterojunction solar cells10.1021/jp510996w ↗
35. Remove the residual additives toward enhanced efficiency with higher reproducibility in polymer solar cells10.1021/jp404395q ↗
36. 10.8% efficiency polymer solar cells based on PTB7-Th and PC71BM via binary solvent additives treatment10.1002/adfm.201602181 ↗
37. Miscibility-function relations in organic solar cells: significance of optimal miscibility in relation to percolation10.1002/aenm.201703058 ↗
38. Improving ambipolar semiconducting properties of thiazole-flanked diketopyrrolopyrrole-based terpolymers by incorporating urea groups in the side-chains10.1021/acs.macromol.8b01020 ↗
39. H-bonded duplexes based on a phenylacetylene backbone10.1021/jacs.8b08087 ↗
40. Direct imaging of the induced-fit effect in molecular self-assembly
41. Adhesive supramolecular polymeric materials constructed from macrocycle-based host-guest interactions10.1039/C8CS00955D ↗
42. Original polymorphism in a naphthalene bisimide p-conjugated organogelator: a complex interplay between hydrogen bonding and heterocycle p-stacking10.1039/C9TC04402G ↗
43. Consequences of hydrogen bonding on molecular organization and charge transport in molecular organic photovoltaic materials10.1039/C3TA13529B ↗
44. Hydrogen bonding vs stacking interaction in the crystals of the simplest coumarin derivatives: a study from the energetic viewpoint10.1039/C9CE01344J ↗
45. Molecular lock: a versatile key to enhance efficiency and stability of organic solar cells10.1002/adma.201600426 ↗
46. Hydrogen bond induced green solvent processed high performance ternary organic solar cells with good tolerance on film thickness and blend ratios10.1002/adfm.201902078 ↗
47. High performance opaque and semi-transparent organic solar cells with good tolerance to film thickness realized by a unique solid additive10.1039/C9TA00164F ↗
48. A top-down strategy identifying molecular phase stabilizers to overcome microstructure instabilities in organic solar cells10.1039/C8EE03780A ↗
49. Boosting the efficiency of PTB7-Th:PC71BM polymer solar cells via a low-cost halogen-free supramolecular solid additive10.1039/D0TC04096G ↗
50. A novel AH-D-A-type phase junction material to improve photovoltaic performance and device stability in fullerene OSCs10.1016/j.cclet.2020.03.036 ↗
51. Thermal stabilisation of polymer-fullerene bulk heterojunction morphology for efficient photovoltaic solar cells10.1002/adma.201401062 ↗