journal article·2026-03Open access

Photo-crosslinked networks based on panthenol-derived polyesters: degradable materials for biomedical applications

Isabela Lima Autran Dourado, Daniel Franco Minatelli, Anna Szabó, Denisse Esther Mallaupoma Camarena, Flávia Gonçalves, Sandra Van Vlierberghe, Luiz Henrique Catalani

Abstract

Tissue engineering has an increasing demand for safe materials that can support complex architectures in tissue regeneration. The development of new biodegradable polymers is a challenge that needs to be constantly addressed to drive the advancements towards biomedical applications. In this study, a new polyester based on D,L-panthenol, poly(D,L-4,3′-panthenyl adipate) (PPA), was successfully synthesized, modified, and photo-crosslinked. While panthenol (also called provitamin B5, a cofactor present in a plethora of metabolic reactions) is widely used in the cosmetic industry due to its moisturizing and wound-healing properties, to the best of our knowledge, no previous records of panthenol-derived polycondensation exist in the literature. The synthesized PPA, a polyol, was modified by introducing acryloyl moieties, yielding an amorphous PPA acrylate with around 67 % of double bonds. The acrylate system allows the incorporation of a wide range of co-crosslinkers with diverse reactivities and functional groups, enabling straightforward tuning of network properties. Various co-monomers or co-crosslinkers were incorporated, including N-isopropylacrylamide, N-vinylpyrrolidone, 1-vinylimidazole, 1,6-hexanediol diacrylate, and divinyl adipate, yielding exceptional efficiency in photo-curing, achieving high network densities with rapid gelation kinetics, and full double bond conversion. The systems have proven to be hydrolytically degradable with tunable degradation rates and non-cytotoxic towards NIH-3T3 cell lines. These photo-curable systems are promising candidates for light-based scaffold biofabrication techniques. Moreover, the potential for panthenol-derived polymer functionalization with different unsaturated groups unlocks exciting possibilities for biomedical applications. • Panthenol was used for the first time as a monomer in step-growth polymerization. • Poly(panthenyl adipate), PPA, was acrylated to produce the photo-curable PPA-AC. • PPA-AC was combined with vinylic monomers to produce tailorable materials. • PPA-AC materials are degradable and suitable for light-based biofabrication. • Panthenol-based polymers allow diverse functionalization for biomedical use.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer composites and self-healing · Hydrogels: synthesis, properties, applications · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Tissue engineering and regenerative medicine: concepts for clinical application10.1089/154916804323105053 ↗
2. Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds10.1016/j.biomaterials.2017.06.005 ↗
3. Fabrication of biomedical scaffolds using biodegradable polymers10.1021/acs.chemrev.0c01200 ↗
4. Photopolymerizable biomaterials and light-based 3D printing strategies for biomedical applications10.1021/acs.chemrev.9b00810 ↗
5. Pantothenic acid
6. Topical use of dexpanthenol in skin disorders10.2165/00128071-200203060-00005 ↗
7. Colorimetric and fluorimetric methods for determination of panthenol in cosmetic and pharmaceutical formulation10.1016/S0731-7085(01)00510-6 ↗
8. Skin moisturizing effects of panthenol-based formulations
10. Water recycling efficacies of extremely hygroscopic, antifouling hydrogels10.1039/C8RA07915C ↗
11. Lantoine-Adam · 2015
12. Smith · 2005
13. Selective synthesis of panthenyl esters by a kinetically controlled enzymatic process10.3109/10242422.2013.814644 ↗
14. Sustainable setups for the biocatalytic production and Scale-Up of panthenyl monoacyl esters under solvent-free conditions10.1021/acssuschemeng.3c00266 ↗
15. Biocatalytic synthesis of panthenyl monoacyl esters in ionic liquids and deep eutectic solvents10.1039/C9GC01076A ↗
16. Novozym 435: the “perfect” lipase immobilized biocatalyst?10.1039/C9CY00415G ↗
17. The sequence, crystal structure determination and refinement of two crystal forms of lipase B from Candida Antarctica10.1016/S0969-2126(00)00031-9 ↗
18. Molecular modeling and its experimental verification for the catalytic mechanism of Candida antartica lipase B
19. Novozyme 435: the “Perfect” Lipase Immobilized Biocatalyst?
20. Sweet polyesters ”: Lipase-Catalyzed condensation - polymerizations of alditols10.1021/ma0612834 ↗
21. Isosorbide polyesters from enzymatic catalysis10.1021/ma1013176 ↗
22. Enzymatic syntheses of unsaturated polyesters based on isosorbide and isomannide10.1002/pola.26789 ↗
23. Hern · 1997
24. Investigation of the properties of UV-curing acrylate-terminated unsaturated polyester coatings by utilizing an experimental design methodology10.1007/s11998-007-9035-y ↗
25. Biodegradable bone cement compositions based on acrylate and epoxide terminated poly(propylene fumarate) oligomers and calcium salt compositions10.1016/0142-9612(96)89657-8 ↗
26. Synthesis , characterization , and biocompatibility of novel injectable , biodegradable , and in situ crosslinkable polycarbonate-based macromers
27. Interfacial Lifshitz-van der Waals and Polar Interactions in Macroscopic Systems10.1021/cr00088a006 ↗
28. The usefulness of the Lifshitz-van der Waals/acid-base approach for surface tension components and interfacial tensions10.1016/S0927-7757(99)00070-9 ↗
29. Safety assessment of panthenol , pantothenic acid , and derivatives as used in cosmetics10.1177/10915818221124809 ↗
30. Recent advances and challenges on enzymatic synthesis of biobased polyesters via polycondensation
31. Synthetic biodegradable polymers as orthopedic devices10.1016/S0142-9612(00)00101-0 ↗
32. Odian · 2004
33. Photopolymerization in 3D printing10.1021/acsapm.8b00165 ↗
34. Network structure formation during crosslinking of organic coating systems10.1016/S0079-6700(00)00028-9 ↗
35. Hydrogel scaffolds for tissue engineering: the importance of polymer choice10.1039/C9PY01021A ↗
36. Progress in 3D bioprinting technology for tissue/organ regenerative engineering10.1016/j.biomaterials.2019.119536 ↗
37. Tough photopolymers based on vinyl esters for biomedical applications10.1002/pola.28065 ↗
38. Biocompatibility and antimicrobial activity of poly(3-hydroxyoctanoate) grafted with vinylimidazole10.1016/j.ijbiomac.2011.12.007 ↗
39. Poly(HDDA)-Based polymers for microfabrication and mechanobiology
40. Cytotoxicity and bioadhesive properties of poly- N - isopropylacrylamide hydrogel10.1016/j.heliyon.2019.e01474 ↗
41. Photo-curable resins based on poly(globalide) for 3D printing of resorbable scaffolds: synthesis, crosslinking and post-functionalization10.1039/D5PY00237K ↗
42. Cytotoxicity and pro-inflammatory properties of aliphatic alpha, beta-unsaturated acid and ester monomers in RAW264.7 cells and their chemical reactivity10.21873/invivo.11477 ↗
43. Fouassier
44. Architectural code for rubber elasticity: from supersoft to superfirm materials10.1021/acs.macromol.9b01127 ↗
45. Scattering perspectives on nanostructural inhomogeneity in polymer network gels10.1016/j.progpolymsci.2016.12.011 ↗
46. Physiologically responsive hydrogels, J. Bioact. Compat
47. Statistical mechanics of cross-linked polymer networks II . Swelling10.1063/1.1723792 ↗
48. Peppas
49. The stiffness of living tissues and its implications for tissue engineering10.1038/s41578-019-0169-1 ↗
50. Relationship between the young's modulus and the crystallinity of cross-linked Poly(ε-caprolactone) as an immobilization membrane for cancer radiotherapy
51. Young's modulus of the different crystalline phases of poly (L-lactic acid)10.1016/j.jmbbm.2022.105546 ↗
52. A hydrogen bonds-crosslinked hydrogels with self-healing and adhesive properties for hemostatic10.3389/fbioe.2022.855013 ↗
53. Mechanical regulation of polymer gels10.1021/acs.chemrev.3c00498 ↗
54. Surpassing the stiffness-extensibility trade-off of elastomers via mastering the hydrogen-bonding clusters10.1016/j.matt.2021.11.007 ↗
55. Volumetric printing of thiol‐ene photo‐cross‐linkable Poly(ε ‐caprolactone): a tunable material platform serving biomedical applications
56. Agrawal · 2017
57. Design of biodegradable, implantable devices towards clinical translation10.1038/s41578-019-0150-z ↗
58. Surface engineered polymeric biomaterials with improved biocontact properties10.1155/2010/296094 ↗
59. Structure and reactivity of water at biomaterial surfaces10.1016/S0001-8686(97)00040-7 ↗
60. Aliphatic polyester nanofibers functionalized with cyclodextrins and cyclodextrin-guest inclusion complexes10.3390/polym10040428 ↗
61. Low-temperature plasma treatment of polylactic acid and PLA/HA composite material10.1007/s10853-019-03693-4 ↗
62. Polymers for cell/tissue anti-adhesion10.1016/j.progpolymsci.2014.10.004 ↗
63. Effects of the three-phase crystallization behavior on the hydrolysis of amorphous and semicrystalline Poly(lactic acid)s10.1021/acsapm.1c01080 ↗
64. Biodegradable polymers as biomaterials10.1016/j.progpolymsci.2007.05.017 ↗
65. Polymers from functional macrolactones as potential biomaterials: enzymatic ring opening polymerization, biodegradation, and biocompatibility10.1021/bm800898c ↗
66. Heterogeneity of the NIH3T3 fibroblast cell line10.3390/cells11172677 ↗