journal article·2024-03Open access

Rapidly screening out refractory metallic alloys with high glass-forming ability by laser surface remelting

Xiaobin Liu, Jiazi Bi, Hengbo Zhao, Ran Li, Tao Zhang

Abstract

Compared with conventional metallic glasses, refractory metallic glasses (RMGs) with a mass of refractory element(s), high glass-transition temperature (Tg) and outstanding mechanical properties (like ultrahigh strength, high hardness and good wear resistance) exhibit fascinating potential applications in high temperature field. However, the development of RMGs is painfully slow, and one of the key problems is the lack of rapid and convenient way to screen out high glass-forming refractory alloys. In this study, a method for rapid evaluation of glass forming ability (GFA) based on laser surface remelting was provided. The high-efficiency screening-out method was validated in a classical glass-forming model system of Ni–Nb binary refractory alloys. The effects of different laser parameters on the glass formation and phase evolution were investigated by experimental analysis and finite element simulation. By correlating thermal history of the laser treatment with glass formation, the alloys with high GFA in Ni–Nb system was screened out rapidly. The screening-out efficiency of the novel method can be improved one order of magnitude, compared with that of the conventional techniques, and the materials cost can be reduced, especially for RMGs. The revealed formation mechanism of glassy and crystalline phases in time and spatial distributions influenced by thermal history under multi-scanning laser treatment can provide a significant insight in the construction of the bulk-metallic-glass materials and the related composite ones by laser additive manufactory.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Laser Material Processing Techniques · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Bulk glass-forming metallic alloys: Science and technology
2. Bulk metallic glasses
3. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
4. Processing of bulk metallic glass10.1002/adma.200902776 ↗
5. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
6. Deformation behavior of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain-rates and temperatures10.1016/S1359-6454(03)00164-2 ↗
7. Thermal and elastic properties of Cu-Zr-Be bulk metallic glass forming alloys10.1063/1.2741050 ↗
8. Mechanical properties and corrosion resistance of a new Zr56Ni20Al15Nb4Cu5 bulk metallic glass with a diameter up to 25 mm10.1016/j.jallcom.2013.11.111 ↗
9. Formation and mechanical properties of Zr-Nb-Cu-Ni-Al-Lu bulk glassy alloys with superior glass-forming ability10.1007/s11595-016-1350-7 ↗
10. Review on the research and development of Ti-based bulk metallic glasses10.3390/met6110264 ↗
11. FeSiBP bulk metallic glasses with unusual combination of high magnetization and high glass-forming ability10.2320/matertrans.MRP2007198 ↗
12. Ternary Fe-P-C bulk metallic glass with good soft-magnetic and mechanical properties10.1016/j.scriptamat.2011.06.020 ↗
13. Soft magnetic Fe-Co-based amorphous alloys with extremely high saturation magnetization exceeding 1.9 T and low coercivity of 2 A/m10.1016/j.jallcom.2017.06.192 ↗
14. OsCo-based high-temperature bulk metallic glasses with robust mechanical properties10.1016/j.scriptamat.2023.115336 ↗
15. Under what conditions can a glass be formed?10.1080/00107516908204405 ↗
16. Superconductivity, magnetic susceptibility, and electronic properties of amorphous (Mo1-xRux)80P20 alloys obtained by liquid quenching10.1103/PhysRevB.18.206 ↗
17. Structure and properties of transition-metal-metalloid glasses based on refractory metals10.1103/PhysRevB.20.1640 ↗
18. Superconductivity in amorphous T5T9 transition-metal alloys (T5=Nb, Ta; T9=Rh, Ir)10.1103/PhysRevB.22.5213 ↗
19. Molybdenum-based metallic glasses10.1007/BF00752147 ↗
20. Superconductivity of ductile Nb-based amorphous alloys10.2320/matertrans1960.21.115 ↗
21. Melting of β-quartz up to 2.0 GPa and thermodynamic optimization of the silica liquidus up to 6.0 GPa10.1016/S0031-9201(02)00005-5 ↗
22. Mg-Cu-Y amorphous alloys with high mechanical strengths produced by a metallic mold casting method10.2320/matertrans1989.32.609 ↗
23. Preparation of bulky Zr-based amorphous alloys by a zone melting method10.2320/matertrans1989.35.923 ↗
24. The effects of casting temperature on the Glass Formation of Zr‐based metallic glasses10.1002/adem.200900174 ↗
25. Correlation between quenching temperature and internal friction behavior in Zr55Al10Ni5Cu30 bulk metallic glasses10.1002/pssa.201026692 ↗
26. Effect of melt temperature on the mechanical properties of bulk metallic glasses10.1557/jmr.2009.0272 ↗
27. Refractory amorphous metallic (W0.6Re0.4)76B24 coatings on steel substrates10.1063/1.336295 ↗
28. High-temperature bulk metallic glasses developed by combinatorial methods10.1038/s41586-019-1145-z ↗
29. Hard metallic glass of tungsten-based alloy10.1063/1.1763639 ↗
30. Tungsten-based metallic glasses with high crystallization temperature, high modulus and high hardness10.2320/matertrans.46.48 ↗
31. Fabrication of refractory metal based metallic glasses10.1016/j.msea.2006.02.365 ↗
32. Novel W-based metallic glass with high hardness and wear resistance10.1016/j.intermet.2013.12.003 ↗
33. Hard rhenium-boron-cobalt amorphous alloys with a wide supercooled liquid region10.1016/j.msea.2015.08.023 ↗
34. Corrosion resistant Cr-based bulk metallic glasses with high strength and hardness10.1016/j.jnoncrysol.2014.12.006 ↗
35. High-temperature Mo-based bulk metallic glasses10.1016/j.scriptamat.2021.114095 ↗
36. Single‐roller rapid quenching of high melting temperature alloys using plasma‐arc melting10.1063/1.337661 ↗
37. Refractory metallic glasses10.1016/0921-5093(91)90169-N ↗
38. Mechanically alloyed multi-component Mo-based amorphous alloys with wide supercooled liquid region10.1016/j.jnoncrysol.2006.07.041 ↗
39. Microstructural design of hard coatings10.1016/j.pmatsci.2006.02.002 ↗
40. A laser deposition strategy for the efficient identification of glass-forming alloys10.1007/s11661-015-2900-x ↗
41. Production of glassy metallic layers by laser surface treatment10.1016/S1359-6462(02)00382-2 ↗
42. Improvements in microstructure and wear resistance of plasma-sprayed Fe-based amorphous coating by laser-remelting10.1007/s11666-017-0546-5 ↗
43. Microstructure and wear properties of laser processed Ni based amorphous matrix coatings10.1179/1743294412Y.0000000021 ↗
44. Tribological behaviors of high-hardness Co-based amorphous coatings fabricated by laser cladding10.1016/j.triboint.2021.107142 ↗
45. Development of process parameters for selective laser melting of a Zr-based bulk metallic glass
46. Structural evolutions in 3D-printed Fe-based metallic glass fabricated by selective laser melting
47. A combinatorial strategy for metallic glass design via laser deposition10.1016/j.intermet.2014.07.017 ↗
48. High-throughput discovery and characterization of multicomponent bulk metallic glass alloys10.1016/j.actamat.2016.08.068 ↗
49. Steen · 2010
50. Formation of nano-crystalline and amorphous phases on the surface of stainless steel by Nd: YAG pulsed laser irradiation10.1016/j.apsusc.2008.04.069 ↗
51. Laser solid forming Zr-based bulk metallic glass10.1016/j.intermet.2011.10.008 ↗
52. Surface vitrification of alloys by laser surface treatment10.1016/j.jallcom.2011.09.039 ↗
53. Study on feasibility of producing an amorphous surface layer of Fe49Cr18Mo7B16C4Nb3 by pulsed Nd: YAG laser surface melting10.1016/j.apsusc.2012.09.167 ↗
54. A study of structure and morphology of bulk metallic glasses after laser beam treatment10.1007/s11665-019-04462-9 ↗
55. Tribological and mechanical properties of high power laser surface-treated metallic glasses10.1016/j.msea.2007.02.119 ↗
56. Multi-layer laser solid forming of Zr65Al7.5Ni10Cu17.5 amorphous coating: microstructure and corrosion resistance10.1016/j.optlastec.2014.12.008 ↗
57. Amorphization of Zr60Al15Ni25 surface layers by laser processing for corrosion resistance10.1016/S1359-6462(97)00127-9 ↗
58. Multi-pass overlapping laser glazing of FeCrPC and CoNiSiB alloys10.1016/S0040-6090(97)01041-9 ↗
59. Binary bulk metallic glass Ni62Nb38 with high compressive strength of 3100 MPa10.1016/j.intermet.2006.12.008 ↗
60. Binary Ni-Nb bulk metallic glasses
61. Numerical analysis of the competitive influence of Marangoni flow and evaporation on heat surface temperature and molten pool shape in laser surface remelting10.1016/S0927-0256(01)00143-4 ↗
62. Gloriant · 2000 · 365
63. Evaluation of the volume fraction of nanocrystals devitrified in Al-based amorphous alloys10.1016/j.jnoncrysol.2008.12.001 ↗
64. Vibrational and electronic properties of the amorphous systems Ni44Nb56, Ni62Nb38, and Cu33Zr67 as derived from specific heat measurements10.1134/1.1568991 ↗
65. Microstructural analysis of Zr55Cu30Al10Ni5 bulk metallic glasses by laser surface remelting and laser solid forming10.1016/j.intermet.2015.06.007 ↗
66. Microstructural analysis of a laser-processed Zr-based bulk metallic glass10.1007/s11661-009-0151-4 ↗
67. Effect of dynamical heterogeneity on heat capacity at glass transition in typical silicate glasses10.1063/1.4939074 ↗
68. Laser surface cladding of Fe-B-C, Fe-B-Si and Fe-BC-Si-Al-C on plain carbon steel10.1016/j.surfcoat.2005.11.138 ↗
69. On the nature of density changes upon structural relaxation and crystallization of metallic glasses10.1016/j.jnoncrysol.2017.06.024 ↗
70. Pronounced asymmetry in the crystallization behavior during constant heating and cooling of a bulk metallic glass-forming liquid10.1103/PhysRevB.60.11855 ↗
71. Crystallization kinetics of an Au-based metallic glass upon ultrafast heating and cooling10.1016/j.scriptamat.2017.02.001 ↗
72. Structural heterogeneity in 3D printed Zr-based bulk metallic glass by selective laser melting10.1016/j.jallcom.2018.01.037 ↗
73. Graded structure of laser direct manufacturing bulk metallic glass10.1016/j.intermet.2018.10.005 ↗