journal article·2018-02

Diamine-cored tetrastilbene compounds as solution-processable hole transport materials for stable organic light emitting diodes

Min Jy Cho, Kyu Min Sim, Sa-Rang Bae, Hye Ok Choi, Soo Young Kim, Dae Sung Chung, Kwangyong Park

Dyes and Pigments· Volume 149
Publisher page

Abstract

Abstract A series of diamine-cored tetrastilbene (DTS) derivatives bearing various aliphatic and aromatic substituents was designed and synthesized for use as solution-processed hole transport layers (HTLs) in organic light emitting diodes (OLEDs). The chemical structures of the DTS derivatives were strategically designed to increase solubility in organic solvents as well as to avoid self-crystallization, and thus ensure a stable morphology under Joule heating while maintaining efficient hole transport capabilities. The five DTS derivatives, composed of different conjugation structures, yielded reasonably good hole transport behavior with a marginal charge carrier mobility of ∼10−5 cm2V−1s−1, which is similar to that of vacuum-deposited N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB). Due to the high glass transition temperatures of the DTS derivatives, this satisfactory charge transport behavior and smooth surface morphology were conserved up to 180 °C. Green OLEDs were prepared using tris-(8-hydroxyquinoline) aluminum (Alq3):C545T as the emission layer, and the OLED performances of the solution-processed DTS HTLs and the vacuum-deposited NPB HTL were compared. A high luminance efficiency of 11.5 cd A−1 was obtained for one solution-processed DTS HTL, which exceeds that of the NPB HTL (10.01 cd A−1). Furthermore, the DTS HTLs enabled a stable OLED operation, with double the accelerated half-life of the NPB-based device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Luminescence and Fluorescent Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Low-voltage, low-power, organic light-emitting transistors for active matrix displays10.1126/science.1203052 ↗
2. White organic light-emitting diodes with flurescent tube efficiency10.1038/nature08003 ↗
3. Full-color delayed fluorescence materials based on wedge-shaped phthalonitriles and dicyanopyrazines: systematic design, tunable photophysical properties, and OLED performance10.1002/adfm.201505106 ↗
4. High efficiency tandem organic light emitting diode using an organic heterojunction as the charge generation layer: an investigation into the charge generation model and device performance10.1021/acsphotonics.5b00010 ↗
5. Highly efficient and stable tandem organic light-emitting devices based on HAT-CN/HAT-CN: TAPC/TAPC as a charge generation layer10.1039/C4TC02875A ↗
6. Microcavity two-unit tandem organic light-emitting devices having a high efficiency10.1063/1.2185077 ↗
7. Efficient single-layer organic light-emitting diodes based on C545T-Alq3 system10.1021/jp101269r ↗
8. All-solution-processed blue small molecular organic light-emitting diodes with multilayer device structure10.1016/j.orgel.2009.06.020 ↗
9. Phosphoryl/sulfonyl-substituted iridium complexes as blue phosphorescent emitters for single-layer blue and white organic light-emitting diodes by solution process10.1021/cm302850w ↗
10. A solution processed top emission OLED with transparent carbon nanotube electrodes10.1088/0957-4484/21/13/134020 ↗
11. Blade coating of tris (8-hydroxyquinolinato) aluminum as the electron-transport layer for all-solution blue fluorescent organic light-emitting diodes10.1016/j.orgel.2015.10.026 ↗
12. A solvent/non-solvent system for achieving solution-processed multilayer organic light-emitting devices10.1016/j.tsf.2015.07.043 ↗
13. Organic light emitting diodes: energy saving lighting technology—a review10.1016/j.rser.2012.02.021 ↗
14. The simple way to solution-processed multilayer OLEDs–layered block-copolymer networks by living cationic polymerization10.1002/adma.200801556 ↗
15. Composite hole-injection layer consisting of PEDOT: PSS and SiO2 nanoparticles for efficient polymer light-emitting diodes10.1002/adma.201003490 ↗
16. Effect of thin iridium oxide on the formation of interface dipole in organic light-emitting diodes10.1063/1.2135874 ↗
17. Hole and electron extraction layers based on graphene oxide derivatives for high-performance bulk heterojunction solar cells10.1002/adma.201104945 ↗
18. Synthesis of atomically thin transition metal disulfides for charge transport layers in optoelectronic devices10.1021/acsnano.5b01504 ↗
19. Performances of liquid-exfoliated transition metal dichalcogenides as hole injection layers in organic light-emitting diodes10.1002/adfm.201501333 ↗
20. Crosslinkable TAPC-based hole-transport materials for solution-processed organic light-emitting diodes with reduced efficiency roll-off10.1002/adfm.201201197 ↗
21. Novel hole transport materials based on N, N′-disubstituted-dihydrophenazine derivatives for electroluminescent diodes10.1039/C4TC01965B ↗
22. 1-(N-phenylamino) naphthalene oligomers as novel hole transport materials for highly efficient green electrophosphorescence10.1016/j.dyepig.2015.02.011 ↗
23. Recent developments in molecular organic electroluminescent materials10.1002/masy.19981250102 ↗
24. Energy level alignment at a charge generation interface between 4,4′-bis(N-phenyl-1-naphthylamino)biphenyl and 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile10.1063/1.3081409 ↗
25. Origin of high mobility within an amorphous polymeric semiconductor: space-charge-limited current and trap distribution10.1063/1.2958213 ↗
26. Organic field-effect transistor sensors: a tutorial review10.1039/c3cs60127g ↗
27. Hole mobility of N, N′-bis (naphthalen-1-yl)-N, N′-bis (phenyl) benzidine investigated by using space-charge-limited currents10.1063/1.2741055 ↗