journal article·2022-08Open access

Hydroxyapatite nanoparticles in situ grown on carbon nanotube as a reinforcement for poly (ε-caprolactone) bone scaffold

Pei Feng, Kai Wang, Yang Shuai, Shuping Peng, Yongbin Hu, Cijun Shuai

Abstract

The incorporation of carbon nanotubes (CNT) and hydroxyapatite (HA) into biopolymer as bone scaffold is expected to combine the excellent mechanical properties of CNT and bioactivity of HA. However, the dispersion of CNT and HA in biopolymer is a challenge. In this paper, under the condition of hydrothermal reaction, HA nanoparticles were in situ synthesized on the surface of carboxyl multi-walled CNT to prevent their aggregation in poly (ε-caprolactone) (PCL) scaffold prepared by selective laser sintering (SLS). The mechanism of in situ synthesis of HA nanoparticles was that the carboxyl functional groups of cCNT acted as anchor sites for Ca2+ deposition, and then Ca2+ attracted HPO42− via electrovalent bonding to in situ nucleation and synthesis of HA nanocrystals. The results demonstrated that HA nanoparticles ranged from about 10 to 30 nm in diameter and 40–80 nm in length were homogeneously generated on the surface of cCNT. Compared with the pure PCL scaffold, the scaffold with contenting of 12% cCNT-HA was increased by 86.6% and 31.9% in tensile and compressive strength, respectively. The strengthening mechanisms could be explained from the bridging and pulling out of the cCNT-HA. Meanwhile, the mineralization experiment results demonstrated that the Ca/P ratio of apatite layer formed on the surface of the PCL/12% cCNT-HA scaffold was 1.66, which was close to that of human bone tissue, indicating the scaffold possessed good bioactivity for inducing the formation of apatite mineralization. Besides, the scaffolds displayed good cytocompatibility for cell attachment, growth and proliferation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. Improving interfacial and mechanical properties of carbon nanotube-sized carbon fiber/epoxy composites10.1016/j.carbon.2019.01.063 ↗
2. Effect of CNT orientation on the mechanical property and fracture mechanism of vertically aligned carbon nanotube/carbon composites10.1016/j.ceramint.2019.10.230 ↗
3. A molecular-level interface design enabled high-strength and high-toughness carbon nanotube buckypaper10.1002/mame.202100244 ↗
4. Interfacial characteristics of carbon nanotube-polymer composites: a review10.1016/j.compositesa.2018.08.021 ↗
5. Fabrication of shish-kebab-structured carbon nanotube/poly (ε-caprolactone) composite nanofibers for potential tissue engineering applications10.1007/s12598-017-0965-y ↗
6. Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating10.1126/sciadv.1700262 ↗
7. Synthesis and characterization of ceramic-polymer composites containing bioactive synthetic hydroxyapatite for biomedical applications10.1016/j.ceramint.2018.04.199 ↗
8. 3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration10.1007/s42242-019-00056-5 ↗
9. Electrospun polymer biomaterials10.1016/j.progpolymsci.2019.01.002 ↗
10. Oxidized-sulfonated multi-walled carbon nanotube/hydroxyapatite hybrid particles: synthesis and characterization10.1016/j.jssc.2019.120924 ↗
11. Functionalized multi-walled carbon nanotubes and hydroxyapatite nanorods reinforced with polypropylene for biomedical application10.1038/s41598-020-80767-3 ↗
12. Improved nanomechanical and in-vitro biocompatibility of graphene oxide-carbon nanotube hydroxyapatite hybrid composites by synergistic effect
13. Development of a new carbon nanotube-alginate-hydroxyapatite tricomponent composite scaffold for application in bone tissue engineering
14. The effect of carbon nanotube addition on the mechanical properties and biological functionality of poly-ether-ether-ketone-hydroxyapatite composites10.1002/pc.26055 ↗
15. PMMA-CNT-HAp nanocomposites optimized for 3D-printing applications10.1088/2053-1591/ab2157 ↗
16. Hydroxyapatite modified with carbon-nanotube-reinforced poly (methyl methacrylate): a nanocomposite material for biomedical applications10.1002/adfm.200700888 ↗
17. Carbon nanotube reinforced poly (l-lactide) scaffolds: in vitro degradation, conductivity, mechanical and thermal properties10.1080/09276440.2020.1792630 ↗
18. Synthesis and characterization of chitosan-multiwalled carbon nanotubes/hydroxyapatite nanocomposites for bone tissue engineering10.1007/s10856-013-4954-x ↗
19. Carbon nanotube reinforced hydroxyapatite nanocomposites as bone implants: nanostructure, mechanical strength and biocompatibility10.2147/IJN.S218248 ↗
20. Preparation and characterization of polylactic acid (PLA) carbon nanotube nanocomposites10.1016/j.polymertesting.2018.03.044 ↗
21. Novel synthesis of bioactive hydroxyapatite/f-multiwalled carbon nanotube composite coating on 316L SS implant for substantial corrosion resistance and antibacterial activity10.1016/j.jallcom.2018.10.341 ↗
22. Utilization of carboxylic functional groups generated during purification of carbon nanotube fiber for its strength improvement10.1016/j.apsusc.2016.09.060 ↗
23. Functionalized multiwalled carbon nanotube-reinforced polyimide composite films with enhanced mechanical and thermal properties10.1155/2019/9302803 ↗
24. Carbon nanotube-reinforced mesoporous hydroxyapatite composites with excellent mechanical and biological properties for bone replacement material application10.1016/j.msec.2017.04.048 ↗
25. Fabrication and in vivo evaluation of hydroxyapatite/carbon nanotube electrospun fibers for biomedical/dental application10.1016/j.msec.2017.05.109 ↗
26. The effect of multi-walled carbon nanotubes/hydroxyapatite nanocomposites on biocompatibility10.1080/09243046.2017.1374705 ↗
27. Design and fabrication of porous biodegradable scaffolds: a strategy for tissue engineering10.1080/09205063.2017.1354674 ↗
28. Additive manufacturing of precision optics at micro and nanoscale10.1088/2631-7990/ab0fa5 ↗
29. The journey of multifunctional bone scaffolds fabricated from traditional toward modern techniques10.1007/s42242-020-00094-4 ↗
30. Preparation, characterisation and biological evaluation of biopolymer-coated multi-walled carbon nanotubes for sustained-delivery of silibinin10.1038/s41598-020-73963-8 ↗
31. Carbon nanotubes-hydroxyapatite nanocomposites for an improved osteoblast cell response10.1155/2016/3941501 ↗
32. Carbon nanotube toughened hydroxyapatite by spark plasma sintering: microstructural evolution and multiscale tribological properties10.1016/j.carbon.2010.04.047 ↗
33. Preparation of nano-hydroxyapatite coated carbon nanotube reinforced hydroxyapatite composites10.3390/coatings8100357 ↗
34. Multiwalled carbon nanotubes reinforced hydroxyapatite-chitosan composite coating on Ti metal: corrosion and mechanical properties10.1111/j.1551-2916.2012.05195.x ↗
35. Development of carbon nanotubes reinforced hydroxyapatite composite coatings on titanium by electrodeposition method10.1016/j.corsci.2013.04.021 ↗
36. Enhanced defluoridation capacity from aqueous media via hydroxyapatite decorated with carbon nanotube10.3389/fchem.2018.00104 ↗
37. A comparison of the effects of silica and hydroxyapatite nanoparticles on poly (ε-caprolactone)-poly (ethylene glycol)-poly (ε-caprolactone)/chitosan Nanofibrous scaffolds for bone tissue engineering10.1007/s13770-018-0140-z ↗
38. Electrodeposition of hydroxyapatite-multiwalled carbon nanotube nanocomposite on Ti6Al4V10.1155/2020/8639687 ↗
39. Pressureless sintering and mechanical properties of hydroxyapatite/functionalized multi-walled carbon nanotube composite10.1016/j.msec.2016.05.018 ↗
40. On the crystallization of hydroxyapatite under hydrothermal conditions: role of sebacic acid as an additive10.1021/acsomega.0c03297 ↗
41. Thermodynamic study for the role of functional group on the honey-comb pattern interaction between CNT and E5CN7 nematic liquid crystal10.1016/j.molliq.2021.117287 ↗
42. Development of functionalized carbon nanotube reinforced hydroxyapatite magnetic nanocomposites10.1016/j.matlet.2016.01.060 ↗
43. The use of cellulose nanofillers in obtaining polymer nanocomposites: properties, processing, and applications
44. Contribution of oriented structure and rigid nanofillers to mechanical enhancement of die-drawn PP/MWCNT composites10.1016/j.polymertesting.2019.106165 ↗
45. Wound healing bionanocomposites based on castor oil polymeric films reinforced with chitosan-modified ZnO nanoparticles10.1021/acs.biomac.5b00447 ↗
46. Preparation of bioactive hydroxyapatite@ halloysite and its effect on MC3T3-E1 osteogenic differentiation of chitosan film10.1016/j.msec.2019.110072 ↗
47. Phenyl glycidyl ether as an effective noncovalent functionalization agent for multiwalled carbon nanotube reinforced polyamide 6 nanocomposite fibers10.1016/j.compscitech.2019.04.021 ↗
48. Polymer fiber scaffolds for bone and cartilage tissue engineering10.1002/adfm.201970246 ↗
49. Transcrystalline growth of PLLA on carbon fiber grafted with nano-SiO2 towards boosting interfacial bonding in bone scaffold10.1186/s40824-021-00248-0 ↗
50. Anisotropic compressive properties of CNT/SiC composites produced by direct matrix infiltration of vertically aligned CNT forests10.1016/j.jallcom.2017.01.185 ↗
51. Effect of incorporating Elaeagnus angustifolia extract in PCL-PEG-PCL nanofibers for bone tissue engineering10.1007/s11705-018-1742-7 ↗
52. Dilemma and breakthrough of biodegradable poly-l-lactic acid in bone tissue repair10.1016/j.jmrt.2022.01.164 ↗
53. Synergistic effect of functionalized graphene oxide and carbon nanotube hybrids on mechanical properties of epoxy composites10.1039/C8RA08312F ↗
54. Smart transformable nanoparticles for enhanced tumor theranostics10.1063/5.0061530 ↗
55. Mechanical reinforcement of polymers using carbon nanotubes10.1002/adma.200501851 ↗
56. Materials design for bone-tissue engineering10.1038/s41578-020-0204-2 ↗
57. Dual nanofiber scaffolds composed of polyurethane-gelatin/nylon 6-gelatin for bone tissue engineering10.1016/j.colsurfa.2020.124817 ↗
58. Production of poly (ε-caprolactone)/hydroxyapatite composite scaffolds with a tailored macro/micro-porous structure, high mechanical properties, and excellent bioactivity10.3390/ma10101123 ↗
59. A new multifunctional monticellite-ciprofloxacin scaffold: preparation, bioactivity, biocompatibility, and antibacterial properties10.1016/j.matchemphys.2018.09.054 ↗
60. Relationship between in vitro apatite-forming ability measured using simulated body fluid and in vivo bioactivity of biomaterials10.1016/j.msec.2013.10.026 ↗
61. Fabrication and characterization of novel ethyl cellulose-grafted-poly (ϵ-caprolactone)/alginate nanofibrous/macroporous scaffolds incorporated with nano-hydroxyapatite for bone tissue engineering10.1177/0885328218822641 ↗
62. Preparation and characterization of bioactive glass tablets and evaluation of bioactivity and cytotoxicity in vitro
63. Evaluation of in vitro bioactivity of 45S5 bioactive glass/poly lactic acid scaffolds produced by 3D printing
64. Mineralized collagen as a bioactive ink to support encapsulation of human adipose stem cells: a step towards the future of bone regeneration
65. In-vitro biocompatibility, bioactivity, and mechanical strength of PMMA-PCL polymer containing fluorapatite and graphene oxide bone cements10.1016/j.jmbbm.2018.03.016 ↗
66. Melatonin delivery from PCL scaffold enhances glycosaminoglycans deposition in human chondrocytes-Bioactive scaffold model for cartilage regeneration10.1016/j.procbio.2020.08.015 ↗
67. Tuning surface properties of bone biomaterials to manipulate osteoblastic cell adhesion and the signaling pathways for the enhancement of early osseointegration10.1016/j.colsurfb.2018.01.022 ↗
68. Sr2+ sustained release system augments bioactivity of polymer scaffold10.1021/acsapm.2c00024 ↗
69. Rotary jet-spun curcumin-loaded poly L-lactic acid membranes for wound-healing applications10.1016/j.jmrt.2022.03.136 ↗
70. Peptide-incorporated 3D porous alginate scaffolds with enhanced osteogenesis for bone tissue engineering10.1016/j.colsurfb.2016.03.047 ↗
71. In situ grown rare earth lanthanum on carbon nanofiber for interfacial reinforcement in Zn implants10.1080/17452759.2022.2053929 ↗
72. Enhanced anticancer potency by thermo/pH-responsive PCL-based magnetic nanoparticles10.1080/09205063.2017.1414482 ↗
73. Physicochemical and antibacterial characterization of nanofibrous wound dressing from silk fibroin-polyvinyl alcohol-elaeagnus angustifolia extract10.1007/s12221-020-9428-4 ↗
74. Silver-decorated black phosphorus: a synergistic antibacterial strategy10.1088/1361-6528/ac5aee ↗
75. Electrospun polyhydroxybutyrate/poly (ε-caprolactone)/58S sol–gel bioactive glass hybrid scaffolds with highly improved osteogenic potential for bone tissue engineering10.1021/acsami.6b03997 ↗
76. Water-responsive shape memory thermoplastic polyurethane scaffold triggered at body temperature for bone defect repair10.1039/D1QM01635K ↗
77. In situ growth of a metal-organic framework on graphene oxide for the chemo-photothermal therapy of bacterial infection in bone repair10.1021/acsami.2c04841 ↗
78. Magnetic-driven wireless electrical stimulation in a scaffold10.1016/j.compositesb.2022.109864 ↗
79. Nitrogen-doped carbon-ZnO heterojunction derived from ZIF-8: a photocatalytic antibacterial strategy for scaffold10.1016/j.mtnano.2022.100210 ↗
80. A conductive network enhances nerve cell response
81. Synthesis and in vitro evaluation of thermosensitive hydrogel scaffolds based on (PNIPAAm-PCL-PEG-PCL-PNIPAAm)/Gelatin and (PCL-PEG-PCL)/Gelatin for use in cartilage tissue engineering10.1080/09205063.2018.1447627 ↗
82. Formation of hierarchical bone-like apatites on silk microfiber templates via biomineralization10.1039/C6RA17199K ↗
83. Structural, mechanical, and biocompatibility analyses of a novel dental restorative nanocomposite10.1002/app.37841 ↗