Tuning the colour of solution processed perylene tetraester based OLEDs from yellowish-green to greenish-white: A molecular engineering approach
Source abstract
Abstract
Three regioisomericaly pure 1,7-di-ethynyl bridged perylene-3,4,9,10-tetracarboxy tetrabutylesters functionalized with triisopropylsilyl-ethynylen (PTE1), phenyl-ethynylen (PTE2) and tetraphenylsilyl-ethynylen (PTE3) groups were synthesized. Photophysical, thermal, electrochemical, and solution processed electroluminescence (EL) behaviours were investigated in comparison with a basic perylene-3,4,9,10-tetracarboxy tetrabutylester (PTEref) structure. Stepwise pi conjugation, allowed tuning the absorption and photoluminescence wavelengths of the PTEs without disturbing the photo, thermal and electrochemical stabilities; >> 10h, >250 degrees C, and >50 cycles, respectively. Electron mobility of PTE2 is measured to be more than 10-fold of the other PTE derivatives. Individual utilization of PTE derivatives as solid-state emitters in poly(N-vinylcarbazole) (PVK): 2-(4-Biphenylyl)-5-phenyl-1,3,4-oxadiazole (PBD) host matrix produced yellowish-green EL. Benefiting from higher electron mobiliy, PTE2 emitter presented the best device efficiency values with an EL maximum of 535 nm. Whereas dual doping of the synthesized PTEs with PTEref resulted in greenish-white light with increased stability. Although the emitting layer contained no red emitting component, optimization of the dual doping ratio of PTEref:PTE3 produced a colour rendering index value of 76 with Commission Internationale d'Eclairage coordinates of (0.29, 0.37).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Taking the place of perylene diimide: perylene tetracarboxylic tetraester as a building block for polymeric acceptors to achieve higher open circuit voltage in all-polymer bulk heterojunction solar cells10.1039/c3py00938f ↗
2. Room temperature perylene based columnar liquid crystals as solid-state fluorescent emitters in solution-processable organic light-emitting diodes10.1039/D0TC02754E ↗
3. Hybrid LEDs pave way to new lighting applications
4. Warm white LED light by frequency down-conversion of mixed yellow and red Lumogen
5. Generation of white LED light by frequency downconversion using perylene-based dye10.1049/el.2012.3084 ↗
6. Tailorable perylene-loaded fluorescent nanostructures: a multifaceted approach enabling their application in white hybrid LEDs10.1039/C6TC00486E ↗
7. Fluorescence and triplet quantum yields of arenes on surfaces10.1021/jp972934o ↗
8. Hybrid inorganic‐organic white light emitting diodes10.1002/9781119654643.ch8 ↗
9. Perylene bisimides-based molecular dyads with different alkyl linkers for single-component organic solar cells10.1016/j.dyepig.2022.110355 ↗
10. The halogen effect of perylene diimide-based non-fullerene acceptors on photovoltaic properties10.1016/j.dyepig.2022.110232 ↗
11. Synthesis and photophysical properties of new perylene bisimide derivatives for application as emitting materials in OLEDs10.1016/j.dyepig.2018.07.006 ↗
12. Interlayer engineering of flexible and large-area red organic-light-emitting diodes based on an n-annulated perylene diimide dimer10.1021/acsaelm.9b00688 ↗
13. Efficient electroluminescence from a perylenediimide fluorophore obtained from a simple solution processed OLED10.1088/0022-3727/42/10/105106 ↗
14. Perylene diimide derivatives as red and deep red-emitters for fully solution processable OLEDs10.1039/C6RA10467C ↗
15. A perylene diimide-based electron transport layer enabling efficient inverted perovskite solar cells10.1039/C8TA06081A ↗
16. En route to wide area emitting organic light-emitting transistors for intrinsic drive-integrated display applications: a comprehensive review10.1002/adfm.202105506 ↗
17. Control over π-πstacking of heteroheptacene-based nonfullerene acceptors for 16% efficiency polymer solar cells10.1093/nsr/nwaa189 ↗
18. Tuning charge transport in solution-sheared organic semiconductors using lattice strain10.1038/nature10683 ↗
19. Organic light-emitting diodes based on a columnar liquid-crystalline perylene emitter10.1002/adom.202000414 ↗
20. Navigating CIE space for efficient TADF downconversion WOLEDs10.1016/j.dyepig.2020.108707 ↗
21. Perylene-embedded electrospun PS fibers for white light generation10.1016/j.dyepig.2018.08.040 ↗
22. Perylene based solution processed single layer woled with adjustable CCT and CRI
23. The use of a perylenediimide derivative as a dopant in hole transport layer of an organic light emitting device10.1016/j.apsusc.2011.02.002 ↗
24. Electroluminescent and optoelectronic properties of OLEDs with bay-extended, distorted perylene esters as emitter materials10.1002/cphc.201700502 ↗
25. Electroluminescent room temperature columnar liquid crystals based on bay-annulated perylene tetraesters10.1039/C6TC04166C ↗
26. First example of white organic electroluminescence utilizing perylene ester imides10.1002/slct.201801258 ↗
27. A perylene-triazine-based star-shaped green light emitter for organic light emitting diodes10.1002/ejoc.201800161 ↗
28. Solution-processable organic light-emitting diodes utilizing electroluminescent perylene tetraesters-based columnar liquid crystals10.1039/D2SM01235A ↗
29. Self-assembly of luminescent N-annulated perylene tetraesters into fluid columnar phases10.1039/C5SM00463B ↗
30. Novel derivatives of regioisomerically pure 1,7-disubstituted perylene diimide dyes bearing phenoxy and pyrrolidinyl substituents: synthesis, photophysical, thermal, and structural properties10.1016/j.jlumin.2017.07.019 ↗
31. Silylethynyl substitution for preventing aggregate formation in perylene diimides10.1021/acs.jpcc.1c03131 ↗
32. Efficiency roll-off in organic light-emitting diodes10.1002/adma.201301603 ↗
33. Recent advances in white organic light-emitting diodes10.1016/j.mser.2016.06.001 ↗
34. Design of perylene diimides for organic solar cell: effect of molecular steric hindrance and extended conjugation10.1016/j.matchemphys.2015.07.025 ↗
35. Sengupta Sanchita, Dubey Rajeev K., Hoek Rob W.M., van Eeden P., Sjoerd P., Gunbas D. Deniz, et al. Synthesis of regioisomerically pure 1,7-dibromoperylene-3,4,9,10- tetracarboxylic acid derivatives. J. Org. Chem. 2014;79:6655–6662. doi.org/10.1021/jo501180a.10.1021/jo501180a ↗
36. White LED light production by using dibromoperylene derivatives in down conversion of energy10.1139/cjp-2017-0752 ↗
37. Synthesis, characterization and solid-state emission properties of arylsilyl-substituted pyrene derivatives10.1016/j.dyepig.2013.07.003 ↗
38. Bay-Annulated perylene tetraesters: a new class of discotic liquid crystals10.1002/cphc.201501028 ↗
39. Null exciton splitting in chromophoric Greek cross (+) aggregate10.1002/ange.201810209 ↗
40. The effect of imide substituents on the excited state properties of perylene diimide derivatives
41. Electrochemical and spectroelectrochemical investigations of perylene peri-tetracarbonyl species10.1016/j.dyepig.2020.108735 ↗
42. Conjugated dimeric and trimeric perylenediimide oligomers10.1021/ol9012734 ↗
43. Electroplex emission at PVK/Bphen interface for application in white organic light-emitting diodes10.1016/j.jlumin.2011.05.056 ↗
44. The fuzziness of a chromogenic spirooxazine10.1016/j.dyepig.2014.03.024 ↗
45. Schanda · 2007 · 459
46. Approaches to color rendering measurement10.1080/09500340903023733 ↗
47. Gentili · 2016 · vol. 135 · 169