Fine-tuning of non-fullerene acceptor gives over 14% efficiency for organic solar cells
Source abstract
Abstract
Abstract In this work, a new non-fullerene electron acceptor (Y8) was synthesized with a fused dithienothiophen [3, 2-b] -pyrrolo benzothiadiazole (TPBT unit with a BT-core) as central unit and two electron-deficient units of 2-(6-fluoro-2, 3-dihydro-3-oxo-1H-inden-1-ylidene) - propanedinitrile (F-IC) as the end groups. Y8 possessed strong absorption in 700–900 nm. The inverted device based on ITO/ZnO/PM6:Y8/MoO3/Ag structure, demonstrated the power conversion efficiency (PCE) up to 14.25% with a short circuit current density (Jsc) of 22.18 mA cm−2 and a high open-circuit voltage (Voc) of 0.88 V. And the optimized device based on PM6:Y8 exhibited relatively high electron mobility (8.7 × 10−4 cm2V−1s−1). These results demonstrated that application of F-IC end group based on small molecule could be a promising measure for improving efficiency of OPVs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. High-efficiency all-small-molecule organic solar cells based on an organic molecule donor with alkylsilyl-thienyl conjugated side chains10.1002/adma.201706361 ↗
2. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
3. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
4. Achieving balanced charge transport and favorable blend morphology in non-fullerene solar cells via acceptor end group modification10.1021/acs.chemmater.8b05327 ↗
5. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
6. 5H-dithieno[3,2-b:20,30-d]pyran-5-one unit yields efficient wide-bandgap polymer donors10.1016/j.scib.2019.09.001 ↗
7. Alkyl chain tuning of small molecule acceptors for efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
8. Recent progress in molecular design of fused ring electron acceptors for organic solar cells10.1002/smll.201900134 ↗
9. Nonfullerene tandem organic solar cells with high performance of 14.11%10.1002/adma.201707508 ↗
10. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
11. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
12. Towards predicting the power conversion efficiencies of organic solar cells from donor and acceptor molecule structures10.1039/C7TC05290A ↗
13. Thiophene-thiazolothiazole copolymers: significant impact of side chain composition on backbone orientation and solar cell performances10.1002/adma.201303059 ↗
14. High extinction coefficient thieno[3,4-b]thiophene-based copolymer for efficient fullerene-free solar cells with large current density10.1021/acs.chemmater.7b01650 ↗
15. Quinoxaline–thiophene based thick photovoltaic devices with an efficiency of ~8%10.1039/C6TA03801H ↗
16. A simple strategy to the side chain functionalization on the quinoxaline unit for efficient polymer solar cells10.1039/C6CC01771A ↗
17. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
18. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
19. Enhancing the performance of a fused-ring electron acceptor by unidirectional extension10.1021/jacs.9b08988 ↗
20. Effect of isomerization on high-performance nonfullerene electron acceptors10.1021/jacs.8b04027 ↗
21. Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics10.1038/s41467-019-08386-9 ↗
22. Achieving over 15% efficiency in organic photovoltaic cells via copolymer design10.1002/adma.201808356 ↗
23. Heteroatom substitution-induced asymmetric A–D–A type non-fullerene acceptor for efficient organic solar cells10.1016/j.jechem.2019.03.009 ↗
24. Spiro-fused perylene diimide arrays10.1021/jacs.7b09140 ↗
25. Three-bladed rylene propellers with three-dimensional network assembly for organic electronics10.1021/jacs.6b04368 ↗
26. A new nonfullerene acceptor with near infrared absorption for high performance ternary-blend organic solar cells with efficiency over 13%10.1002/advs.201800307 ↗
27. The crucial role of intermolecular π–π interactions in A–D–A-type electron acceptors and their effective modulation10.1039/C7TA10461H ↗
28. A high-efficiency organic solar cell enabled by the strong intramolecular electron push-pull effect of the nonfullerene acceptor10.1002/adma.201707170 ↗
29. 26 mA cm−2 Jsc from organic solar cells with a low-bandgap nonfullerene acceptor10.1016/j.scib.2017.10.017 ↗
30. A new electron acceptor with meta-alkoxyphenyl side chain for fullerene-free polymer solar cells with 9.3% efficiency10.1002/advs.201700152 ↗
31. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
32. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
33. Nonfullerene acceptor for organic solar cells with chlorination on dithieno[3,2-b:2′,3′-d]pyrrol fused-ring10.1021/acsenergylett.9b00147 ↗
34. Si-bridged ladder-type small-molecule acceptors for high-performance organic photovoltaics10.1021/acsami.8b17753 ↗
35. Highly efficient organic solar cells based on S,N-heteroacene non-fullerene acceptors10.1021/acs.chemmater.8b02276 ↗
36. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
37. Fused benzothiadiazole: a building block for n-Type organic acceptor to achieve high-performance organic solar cells10.1002/adma.201807577 ↗
38. Achieving 14.11% efficiency of ternary polymer solar cells by simultaneously optimizing photon harvesting and exciton distribution10.1039/C9TA01497G ↗
39. Achieving over 10% efficiency in a new acceptor ITTC and its blends with hexafluoroquinoxaline based polymers10.1039/C7TA02486J ↗
40. New anthracene-fused nonfullerene acceptors for high-efficiency organic solar cells:energy level modulations enabling match of donor and acceptor10.1002/aenm.201803541 ↗
41. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor10.1002/adma.201800868 ↗
42. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
43. Fluorination effects on indacenodithienothiophene acceptor packing and electronic structure, end-group redistribution, and solar cell photovoltaic response10.1021/jacs.8b13653 ↗
44. Synthesis of ITIC derivatives with extended pi-conjugation as non-fullerene acceptors for organic solar cells10.1021/acsami.9b15247 ↗
45. High-performance all-small-molecule solar cells based on a new type of small molecule acceptors with chlorinated end groups10.1002/aenm.201802021 ↗
46. A halogenation strategy for over 12% efficiency nonfullerene organic solar cells10.1002/aenm.201702870 ↗
47. Fine-tuning the energy levels of a nonfullerene small-molecule acceptor to achieve a high short-circuit current and a power conversion efficiency over 12% in organic solar cells10.1002/adma.201704904 ↗
48. Interface-enhanced organic solar cells with extrapolated T80 lifetimes of over 20 years10.1016/j.scib.2019.10.019 ↗
49. Fused Benzothiadiazole: a building block for n-type organic acceptor to achieve high-performance organic solar cells
50. Synergistic effect of halogenation on molecular energy level and photovoltaic performance modulations of highly efficient small molecular materials10.1016/j.nanoen.2017.08.027 ↗
51. Fine-tuning of molecular packing and energy level through methyl substitution enabling excellent small molecule acceptors for nonfullerene polymer solar cells with efficiency up to 12.54%10.1002/adma.201706124 ↗