Printing with hydrotalcite hybrid nanoclays and dispersed, reactive, direct dyes
Source abstract
Abstract
[EN] By using nanotechnologies it is possible to colour textile substrates with new printing techniques using dyes that have been discarded from non-exhausted dye baths. Hydrotalcite is clay with a high adsorbent capacity that can be used for the recovery of dyes from textile wastewater. In this work, three different types of dyes will be adsorbed: direct, reactive and dispersed, the first two being anionic and the last one non-ionic. After this adsorption, the aim is to use this clay-dye hybrid to provide colour to a textile printing paste. The results obtained are subjected to colour fastness tests in order to compare them with more conventional printing processes. The hybrids are also analysed by infrared spectroscopy and x-ray diffraction characterisation techniques to check the correct adsorption and formation of the hybrid. Colour measurements are carried out using reflection spectrophotometers to evaluate the colour results of both the hybrids and the printed textiles successfully and also to analyse their TSR. Thermogravimetric analysis carried out on the hybrids allow anticipating the possible results that they may have, they present certain tests of colour fastness to light which are improved thanks to the action of the hydrotalcite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Phosphorus and nutrient management · Mesoporous Materials and Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Enhanced antibacterial activity and photocatalytic degradation of organic dyes under visible light using cesium lead iodide perovskite nanostructures prepared by hydrothermal method10.1016/j.seppur.2020.117526 ↗
2. A review on conventional and novel materials towards heavy metal adsorption in wastewater treatment application10.1016/j.jclepro.2021.126589 ↗
3. Turning the Co-combustion synergy of textile dyeing sludge and waste biochar into emission-to-bottom slag pollution controls toward a circular economy10.1016/j.renene.2022.05.121 ↗
4. Removal of brilliant green dye from synthetic wastewater under batch mode using chemically activated date pit carbon10.1039/D0RA08488C ↗
5. The removal of brilliant green dye from aqueous solution using nano hydroxyapatite/chitosan composite as a sorbent10.3390/molecules24050847 ↗
6. Kinetics and thermodynamics of acid red 1 adsorption on used black tea leaves from aqueous solution
7. Alqarni, S.A. The performance of different AgTiO2 loading into poly (3-nitrothiophene) for efficient adsorption of hazardous brilliant green and crystal violet dyes. Int. J. Polym. Sci. 2022, 2022.10.1155/2022/4691347 ↗
8. A simple method for removal of toxic dyes such as brilliant green and acid red from the aquatic environment using halloysite nanoclay10.1016/j.jscs.2022.101475 ↗
9. Modification of reduced-charge montmorillonites by a series of gemini surfactants: characterization and application in methyl orange removal10.1016/j.apsusc.2014.11.043 ↗
10. Adsorptive properties of molasses modified boron enrichment waste based nanoclay for removal of basic dyes10.1016/j.jiec.2015.11.017 ↗
11. Comparison of saponite and montmorillonite behaviour during static and stirring maturation with seawater for pelotherapy10.1016/j.clay.2006.05.010 ↗
12. Gemini surfactant modified clays: effect of surfactant loading and spacer length10.1016/j.clay.2018.03.015 ↗
13. Review of nanotechnology value chain for water treatment applications in Mexico
14. NO reduction by CO under oxidative conditions over CoCuAl mixed oxides derived from hydrotalcite-like compounds: effect of water
15. Chemistry between the sheets
16. Adsorption of anionic species on hydrotalcite-like compounds: effect of interlayer anion and crystallinity10.1016/S0169-1317(00)00026-0 ↗
17. Anion-exchange in takovite: applications to other hydroxide minerals
18. Physico-chemical properties of synthetic hydrotalcites in relation to composition10.1346/CCMN.1980.0280107 ↗
19. Geopolymer beads and 3D printed lattices containing activated carbon and hydrotalcite for anionic dye removal10.1016/j.cattod.2021.12.002 ↗
20. Use of anion clay hydrotalcite to remove coloured organics from aqueous solutions10.1016/S1383-5866(02)00158-2 ↗
21. Synthesis of zeolite clay/Fe-Al hydrotalcite composite as a reusable adsorbent for adsorption/desorption of cationic dyes10.1007/s13369-022-06580-4 ↗
22. Preparation of magnetic hydrotalcite composite and its eosin Y adsorption performance
23. Water reuse after removing a textile dye methyl orange using a recyclable hydrotalcite material
24. Recent researches on natural pigments stabilized by clay minerals: a review10.1016/j.dyepig.2021.109322 ↗
25. Biosorption of CI direct blue 199 from aqueous solution by nonviable Aspergillus Niger10.1016/j.jhazmat.2009.09.155 ↗
26. Application of direct contact membrane distillation for textile wastewater treatment and fouling study10.1016/j.seppur.2018.09.031 ↗
27. Monitoring ecotoxicity of disperse red 1 dye during photo-fenton degradation10.1016/j.chemosphere.2016.01.053 ↗
28. Removal of acid green 68:1 from aqueous solutions by calcined and uncalcined layered double hydroxides10.1016/j.clay.2013.04.006 ↗
29. Manufacturing of high quality hydrotalcite by computational fluid dynamics simulation of an impinging jet crystallizer10.1016/j.ceramint.2022.02.081 ↗
30. Monitoring of chemicals and water10.1016/B978-0-323-51084-4.00011-3 ↗
31. Adsorption of an industrial anionic dye by modified-KSF-montmorillonite: evaluation of the kinetic, thermodynamic and equilibrium data10.1016/j.cej.2012.07.009 ↗
32. B. Micó-Vicent, F.M.-V. Method for optimising the synthesis of hybrid nanopigments 2017.
33. Fischer · 2001
34. Enabling lyophilized pneumococcal conjugate vaccines through formulation design and excipient selection suitable for A multivalent adjuvanted vaccine
35. Lyophilization as pre-processing for sample storage in the determination of vitamin D3 and metabolites in serum and plasma
36. Printing of cationised cotton with reactive dyes10.1111/j.1478-4408.2002.tb00114.x ↗
37. Coloration technology - 2006 - ahmed - urea alkali‐free printing of cotton with reactive dyes.Pdf.
38. Coloration technology - 2006 - el‐shishtawy - cationic pretreatment of cotton fabric for anionic dye and Pigment Printing.Pdf.
39. Highly effective hydrophobic solar reflective coating for building materials: increasing total solar reflectance via functionalized anatase immobilization in an organosiloxane matrix10.1016/j.conbuildmat.2020.118189 ↗
40. Chemical sensitivity of porphyrin assemblies10.1016/S1369-7021(10)70127-9 ↗
41. Separation and identification of microplastics in marine organisms by TGA-FTIR-GC/MS: a case study of mussels from coastal China
42. Thermogravimetric analysis (TGA) of PA6/G and PA6/GNP composites using two processing streams
43. TGA coupled with FTIR gas analysis to quantify the vinyl alcohol unit content in ethylene-vinyl alcohol copolymer10.1016/j.matlet.2020.129030 ↗
44. Laponite-derived porous clay heterostructures: I. Synthesis and physicochemical characterization10.1016/j.micromeso.2009.07.019 ↗
45. XRD and SEM/EDS characterization of two quaternary fuel alloys (U-2.5Mo-2.5Ti-5.0Zr and U-1.5Mo-1.5Ti-7.0Zr in wt. %) for fast reactors10.1016/j.matchar.2020.110696 ↗
46. Different dye removal mechanisms between monodispersed and uniform hexagonal thin plate-like MgAl–CO32--LDH and its calcined product in efficient removal of Congo red from water10.1016/j.jallcom.2016.02.248 ↗
47. Adsorption behavior and mechanism of reactive brilliant red X-3B in aqueous solution over three kinds of hydrotalcite-like LDHs10.1016/j.apsusc.2014.02.073 ↗
48. Highly efficient removal of three red dyes by adsorption onto Mg–Al-layered double hydroxide10.1016/j.jiec.2014.03.019 ↗
49. Anionic and cationic dyes removal from aqueous solutions by adsorption onto synthetic Mg/Al hydrotalcite-like compound10.22146/ijc.21190 ↗
50. Evaluation of whiteness10.1364/JOSA.64.000210 ↗
51. ASTM standard tables for reference solar spectral irradiances : direct normal and
52. Behavior of a hydrotalcite type material obtained from MgAl alloy for CO2 adsorption10.1016/j.clay.2019.105296 ↗
53. Removal of acid orange 10 by calcined Mg/Al layered double hydroxides from water and recovery of the adsorbed dye10.1016/j.cej.2012.10.042 ↗
54. Enhanced thermal- and photo-stability of acid yellow 17 by incorporation into layered double hydroxides10.1016/j.jssc.2011.04.020 ↗
55. DTA-TGA and FTIR spectroscopies of sol-gel hydrotalcites: aluminum source effect on physicochemical properties10.1016/S0167-577X(96)00296-0 ↗
56. Ghosh · 2011
57. Photo-stability of rhodamine-B/montmorillonite nanopigments in polypropylene matrix
58. Catalytic charring–volatilization competition in organoclay nanocomposites10.1016/j.polymdegradstab.2006.11.006 ↗
59. Montmorillonite treated with rhodamine-6G mechanochemically and in aqueous suspensions10.1023/A:1020649416016 ↗
60. Hydrotalcite-type anionic clays: preparation, properties and applications10.1016/0920-5861(91)80068-K ↗
61. The role of rehydration in enhancing the basic properties of Mg–Al hydrotalcites for biodiesel production
62. Sorption of an anionic dye by uncalcined and calcined layered double hydroxides: a case study10.1016/j.jhazmat.2004.12.029 ↗
63. Removal of pesticides from water by anionic clays10.1051/jcp:1999154 ↗
64. Preparation and chemical properties of magnesium aluminium oxide solid solutions10.1016/0168-7336(86)80088-2 ↗
65. Stability of hydrotalcite (Mg-Al layered double hydroxide) in presence of different anions10.1016/j.cemconres.2021.106674 ↗
66. Effect of ageing process on crystal morphology of Co-Mg-Al hydrotalcite10.1016/j.matpr.2020.12.390 ↗
67. Synthesis and characterization of hydrotalcite at different Mg/Al molar ratios10.1016/j.proche.2015.12.115 ↗
68. The thermal decomposition of Mg-A1 hydrotalcites: effects of interlayer anions and charateristics of the final structure10.1002/1521-3765(20021216)8:24<5571::AID-CHEM5571>3.0.CO;2-R ↗
69. Kinetic, isotherm, and mechanism investigations of the removal of nitrate and nitrite from water by the synthesized hydrotalcite Mg–Al10.1007/s11164-021-04414-w ↗
70. Infrared investigation of organo-montmorillonites prepared from different surfactants10.1016/j.saa.2010.02.038 ↗
71. Application of response surface methodology for optimization of decolorization and mineralization of triazo dye direct blue 71 by Pseudomonas aeruginosa10.1007/s13205-013-0192-7 ↗
72. Photocatalytic degradation of triazine-containing azo dyes in aqueous TiO2 suspensions10.1016/S0926-3373(02)00214-X ↗
73. Surface and interfacial FTIR spectroscopic studies of latexes. I. Surfactant–Copolymer interactions10.1002/app.1991.070420820 ↗
74. FTIR, TGA and DC electrical conductivity studies of phthalocyanine and its complexes10.1016/j.molstruc.2005.06.003 ↗
75. Synthesis and spectroscopic characterization of an alkoxysilane dye containing C. I. Disperse red 110.1016/j.dyepig.2003.11.009 ↗
76. Molecular orientation in disperse red 1 thin film produced by PVD method10.1016/S0925-3467(01)00169-0 ↗
77. Relationship between structure and dyeing properties of reactive dyes for cotton dyeing10.1016/j.molliq.2017.04.057 ↗
78. Liu · 2016
79. High affinity, high efficiency fibre‐reactive dyes10.1111/j.1478-4408.2006.00032.x ↗
80. New mathematical model for determining time-dependent adsorption and diffusion of dyes into fibers through dye sorption curves in combination shades: Part II: kinetic data from dyeing cotton with a trichrome direct dye system10.1177/004051750007000308 ↗
81. Improving the environmental and economic aspects of cotton dyeing using a cationised cotton10.1111/j.1478-4408.2001.tb00076.x ↗
82. Studies in the equilibrium dyeing of cotton with direct dyes: the determination of the activity and affinity of direct dyes for cellulose10.1246/bcsj.37.1250 ↗
83. Equilibrium study on the disperse dyeing of polyester textile in supercritical carbon dioxide10.1177/0040517507077483 ↗
84. Thermodynamic parameters of disperse dyeing on several polyester fibers having different molecular structures10.1016/j.dyepig.2004.12.005 ↗
85. Review on intermolecular forces between dyes used for polyester dyeing and polyester fiber
86. Novel synthesis of unsaturated pigment anthracene triazole acrylate via click chemistry to prepare colored binder for textile printing
87. Development of ecofriendly binders for pigment printing of all types of textile fabrics10.1016/j.dyepig.2005.06.017 ↗
88. Synthesis of polyurethane acrylate oligomers as aqueous UV-curable binder for inks of ink jet in textile printing and pigment dyeing10.1016/j.dyepig.2006.02.021 ↗
89. Determination of pigment combinations for textile printing using artificial neural networks