journal article·2022-08Open access

Microstructural characterization through grain orientation mapping with Laue three-dimensional neutron diffraction tomography

Stavros Samothrakitis, Camilla Buhl Larsen, Jan Čapek, Efthymios Polatidis, Marc Raventós, Michael Tovar, Søren Schmidt, Markus Strobl

Abstract

For polycrystalline materials, key material properties, such as mechanical anisotropy or transformation behavior, and magnetic properties strongly depend on the crystallographic texture of the crystalline material. Assessment of texture is generally destructive and highly local. Only high energy X-ray diffraction at synchrotron sources and neutrons enable to study, non-destructively, the microstructure in the bulk of materials. Here, we report how progress in Laue three-dimensional neutron diffraction tomography enables to index the crystallographic orientation of several hundred grains and, thus, enables grain-resolved characterization of texture in the volume of centimeter-sized coarse-grained samples with statistical significance. To demonstrate the neutron technique for characterizing the crystallographic microstructure, we investigate a Fe-Ni-Mn austenitic alloy. A total number of 481 grains within a 1 cm3 of material is indexed and the results in assessing the crystallographic texture are compared with electron backscatter diffraction measurements. The short exposure times and non-destructive nature of the Laue three-dimensional neutron diffraction render it a novel promising method for corresponding characterization.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nuclear Physics and Applications · X-ray Diffraction in Crystallography · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Suppressed martensitic transformation under biaxial loading in low stacking fault energy metastable austenitic steels10.1016/j.scriptamat.2017.12.026 ↗
2. Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy10.1016/j.msea.2010.02.008 ↗
3. Elucidating the grain-orientation dependent corrosion rates of austenitic stainless steels10.1016/j.matdes.2020.108583 ↗
4. Use of Rietveld refinement for elastic macrostrain determination and for evaluation of plastic strain history from diffraction spectra10.1063/1.365956 ↗
5. Effect of through-thickness macro and micro-texture gradients on ridging of 17% Cr ferritic stainless steel sheet10.1002/srin.200506098 ↗
6. Crystallographic orientation- dependent magnetic properties of a PrCo5 permanent magnet prepared by hot de- formation10.1039/C6CE00095A ↗
7. Evaluation of the magnetocrystalline anisotropy of typical materials using MBN technology10.3390/s21103330 ↗
8. Compatibility of deformation in two-phase Ti-Al alloys: depen- dence on microstructure and orientation relationships10.1007/BF02670762 ↗
9. Deformation mechanisms in a superelastic NiTi alloy: an in-situ high resolution digital image correlation study10.1016/j.matdes.2020.108622 ↗
10. A multiscale study of hot-extruded CoNiGa ferromagnetic shape-memory alloys10.1016/j.matdes.2020.109118 ↗
11. Understanding of variant selection and twin patterns in compressed Mg alloy sheets via combined analysis of Schmid factor and strain compatibility factor10.1016/j.msea.2014.04.103 ↗
12. Transmission of {332} <113> twins across grain boundaries in a metastable β-titanium alloy10.1016/j.ijplas.2018.02.012 ↗
13. 3D reconstruction and characterization of polycrystalline microstructures using a FIB-SEM system10.1016/j.matchar.2006.01.019 ↗
14. Three-dimensional orientation microscopy in a focused ion beam–scanning electron microscope: a new dimension of microstructure characterization10.1007/s11661-007-9418-9 ↗
15. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
16. 3-Dimensional microstructural characterization of CdTe absorber layers from CdTe/CdS thin film solar cells10.1016/j.solmat.2016.02.023 ↗
17. Serial electron crystallography for structure determination and phase analysis of nanocrystalline materials10.1107/S1600576718009500 ↗
18. Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders10.1107/S0021889801014273 ↗
19. Three-dimensional X-ray structural microscopy with submicrometre resolution10.1038/415887a ↗
20. X-ray microscopy in four dimensions10.1016/S1369-7021(05)71334-1 ↗
21. X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. I. direct beam case10.1107/S0021889808001684 ↗
22. X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. the combined case10.1107/S0021889808001726 ↗
23. Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis10.1063/1.3100200 ↗
24. New opportunities for 3d materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging10.1016/j.msea.2009.04.009 ↗
25. High-energy diffraction microscopy at the advanced photon source10.1007/s11837-011-0116-0 ↗
26. The three dimensional X-ray diffraction technique10.1016/j.matchar.2012.07.012 ↗
27. Non-destructive mapping of grain orientations in 3D by laboratory X-ray microscopy10.1038/srep14665 ↗
28. Simultaneous neutron transmission and diffraction contrast tomography as a non-destructive 3D method for bulk single crystal quality investigations10.1063/1.4823741 ↗
29. 3D mapping of crystallographic phase distribution using energy-selective neutron tomography10.1002/adma.201400192 ↗
30. Cold neutron diffraction contrast tomography of polycrystalline material10.1039/C4AN01490A ↗
31. Inverse pole figure mapping of bulk crystalline grains in a polycrystalline steel plate by pulsed neutron Bragg-dip transmission imaging10.1107/S1600576717012900 ↗
32. Time-of-flight three dimensional neutron diffraction in transmission mode for mapping crystal grain structures10.1038/s41598-017-09717-w ↗
33. Diffraction in neutron imaging-A review10.1016/j.nima.2017.07.040 ↗
34. Laue three dimensional neutron diffraction10.1038/s41598-019-41071-x ↗
35. Grain morphology reconstruction of crystalline materials from Laue three-dimensional neutron diffraction tomography10.1038/s41598-020-60330-w ↗
36. Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels10.1016/j.actamat.2020.08.028 ↗
37. The HZB neutron Laue diffractometer: from E11 to FALCON10.1080/10448632.2014.902701 ↗
38. Automatic measurement of sister chromatid exchange frequency10.1177/25.7.70454 ↗
39. Adaptive thresholding using the integral image10.1080/2151237X.2007.10129236 ↗
40. Grainspotter: a fast and robust polycrystalline indexing algorithm10.1107/S1600576713030185 ↗
41. Representation of orientation relationships in Rodrigues-Frank space for any two classes of lattice10.1107/S0021889807012770 ↗
42. Orientations-perfectly colored10.1107/S1600576716012942 ↗
43. The distribution of rotation axes in a random aggregate of cubic crystals10.1016/0001-6160(64)90191-9 ↗
44. Texture analysis with the new HIPPO TOF diffractometer10.1016/j.nima.2003.05.001 ↗
45. Neutron texture analysis on GEM at ISIS10.1016/j.physb.2006.06.091 ↗
46. Rapid measurement scheme for texture in cubic metallic materials using time-of-flight neutron diffraction at iMATERIA10.1107/S160057671601164X ↗
47. High stereographic resolution texture and residual stress evaluation using time-of-flight neutron diffraction10.1107/S1600576718004004 ↗
48. In-house texture measurement using a compact neutron source10.1107/S1600576720002551 ↗
49. Texture changes in the hcp → bcc → hcp transformation of zirconium studied in situ by neutron diffraction10.1016/j.actamat.2003.12.029 ↗
50. In-situ observation of texture changes during phase transformations in ultra-low-carbon steel10.1007/s11661-006-9033-1 ↗
51. In situ neutron diffraction study of texture evolution and variant selection during the α → β → α phase transformation in Ti–6Al–4V10.1016/j.actamat.2012.09.026 ↗
52. In-situ measurement of texture and elastic strains with HIPPO–CRATES10.1016/j.msea.2006.04.070 ↗