journal article·2017-04

D-A copolymers based on lactam acceptor unit and thiophene derivatives for efficient polymer solar cells

Jiamin Cao, Chuantian Zuo, Junting Yu, Zilong Tang

Dyes and Pigments· Volume 139
Publisher page

Abstract

Abstract Two donor-acceptor (D-A) polymers PTTBDTP and PBTBDTP were developed by copolymerizing lactam acceptor [7,7′-bidithieno[3,2-b:2′,3′-d]pyridine]-5,5′(4H,4′H)-dione (BDTP) with thieno[3,2-b]thiophene (TT) or 2,2′-bithiophene (BT) in good yields. PTTBDTP and PBTBDTP exhibited excellent thermal stability and low HOMO energy levels of −5.52 eV ∼ −5.54 eV. Compared with PTTBDTP, PBTBDTP possessed broader absorption spectra, better crystallinity, and higher hole mobility. Therefore inverted polymer solar cells based on PBTBDTP:PC71BM achieved a higher PCE of 6.86%, with an open-circuit voltage (Voc) of 0.87 V, a short-circuit current (Jsc) of 10.97 mA/cm2 and a fill factor (FF) of 71.85%. Meanwhile, PTTBDTP:PC71BM solar cells gave a PCE of 5.84%. These results have demonstrated that lactam BDTP is a good building block for PSC applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
2. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
3. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
4. 11% Efficient ternary organic solar cells with high composition tolerance via integrated near-IR sensitization and interface engineering10.1002/adma.201602834 ↗
5. Ternary polymer solar cells based on two acceptors and one donor for achieving 12.2% efficiency
6. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
7. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
8. Improved photovoltaic performance of two-dimensional low band-gap conjugated polymers with thieno[3,2-b]thiophene and diketopyrrolopyrrole units by altering pendent position of conjugated side chain10.1016/j.dyepig.2014.04.041 ↗
9. High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive10.1039/c2ee21481d ↗
10. Development of isomer-free fullerene bisadducts for efficient polymer solar cells10.1039/C6EE01026A ↗
11. A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells10.1021/ja071760d ↗
12. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
13. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
14. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
15. All-polymer solar cells based on absorption-complementary polymer donor and acceptor with high power conversion efficiency of 8.27%10.1002/adma.201504629 ↗
16. Tetrafluoroquinoxaline based polymers for non-fullerene polymer solar cells with efficiency over 9%10.1016/j.nanoen.2016.10.008 ↗
17. A pentacyclic aromatic lactam building block for efficient polymer solar cells10.1039/c3ee41948g ↗
18. High-performance inverted PThTPTI: PC71BM solar cells10.1016/j.nanoen.2015.04.016 ↗
19. A lactam building block for efficient polymer solar cells10.1039/C5CC03620H ↗
20. Hexacyclic lactam building blocks for highly efficient polymer solar cells10.1039/C5CC04375A ↗
21. A hexacyclic ladder-type building block for high-performance D-A copolymers10.1039/C5TA07942J ↗
22. A heptacyclic acceptor unit developed for D-A copolymers used in polymer solar cells10.1039/C5PY01761K ↗
23. High-performance polymer tandem solar cells employing a new n-type conjugated polymer as an interconnecting layer10.1002/adma.201506270 ↗
24. A new isoindigo-based molecule with ideal energy levels for solution-processable organic solar cells10.1016/j.dyepig.2013.02.003 ↗
25. Diketopyrrolopyrrole (DPP)-based materials for organic photovoltaics10.1039/c2cc17886a ↗
26. A fused-ring acceptor unit in D-A copolymers benefits photovoltaic performance10.1002/marc.201400196 ↗
27. Correlations among chemical structure, backbone conformation, and morphology in two highly efficient photovoltaic polymer materials10.1021/acs.macromol.5b02416 ↗
28. A new polythiophene derivative for high efficiency polymer solar cells with PCE over 9%10.1002/aenm.201600430 ↗
29. A new thiophene substituted isoindigo based copolymer for high performance ambipolar transistors10.1039/c2cc30169e ↗
30. Toward green solvent processable photovoltaic materials for polymer solar cells: the role of highly polar pendant groups in charge carrier transport and photovoltaic behavior10.1039/c3ee41838c ↗
31. Efficient two layer leds on a polymer blend basis10.1002/adma.19950070608 ↗
32. Enhancing the power conversion efficiency of polymer solar cells to 9.26% by a synergistic effect of fluoro and carboxylate substitution10.1039/C6TA02622B ↗
33. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
34. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
35. A highly efficient fullerene acceptor for polymer solar cells10.1039/c4cp00268g ↗
36. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
37. Replacing indenes on fullerene with CH2 groups benefits photovoltaic performance10.1007/s11426-014-5103-1 ↗
38. A novel benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymer with a pendant diketopyrrolopyrrole unit for high-performance solar cells10.1021/ma302243r ↗
39. A new donor-acceptor-donor ternary copolymer pending additional diketopyrrolopyrrole unit in the side of a donor for efficient solar cells10.1016/j.orgel.2013.03.018 ↗
40. Imide- and amide-functionalized polymer semiconductors10.1021/cr500225d ↗
41. Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials10.1007/s11426-014-5260-2 ↗
42. High-performance photovoltaic polymers employing symmetry-breaking building blocks10.1002/adma.201602857 ↗
43. A simple strategy to the side chain functionalization on the quinoxaline unit for efficient polymer solar cell10.1039/C6CC01771A ↗
44. Acceptor-donor-acceptor small molecules containing benzo[1,2-b:4,5-b′]dithiophene and rhodanine units for solution processed organic solar cells10.1016/j.dyepig.2015.01.006 ↗
45. Synthesis and characterization of novel indacenodithiophene-based narrow band-gap polymers with pendant isoindigo units for polymer solar cells10.1016/j.eurpolymj.2016.06.013 ↗