journal article·2023-08Open access

Formation mechanism of micro/nanoscale structures on picosecond laser pulse processed copper

Mark Anderson, Graham Kaufman, Aaron Ediger, Dennis Alexander, Craig Zuhlke, Jeffrey E. Shield

Abstract

Modification of surfaces with ultrashort pulse laser surface processing techniques has shown to enhance surface properties for numerous applications. To more effectively tailor material properties, there needs to be a better understanding of the self-organization processes that lead to the quasi-periodic micro- and nano-scale surface features. In this paper, a multi-cross-section technique was used to gain understanding of how the surface features form during processing of copper with picosecond pulses. Incremental cross-sections were performed starting at the leading edge of the final laser pass. Each subsequent cross-section moved farther away from the leading edge and towards the final microstructure seen within the center of the processed region. Utilizing the cross-sectional and laser confocal data combined with the 2D projection of the Gaussian beam profile, a progression of formation mechanisms that includes a balance of ablation, redeposition, shielding, and sintering is explained. This formation mechanism progressed with initial ablation of copper that redeposits onto the surface. The redeposited copper then acts as a protection against the high fluence portion of the laser beam allowing for the mounds to grow. The redeposited copper particles are then sintered by the tail-end of the Gaussian profile into a porous layer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser Material Processing Techniques · Laser-induced spectroscopy and plasma · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Review of heat transfer technologies in electronic equipment10.1115/1.2792113 ↗
2. Greene · 2011 · i
3. Kruse · 2018
4. Enhancement of thermal conductivity with CuO for nanofluids10.1002/ceat.200500184 ↗
5. Laser-engineered microcavity surfaces with a Nanoscale superhydrophobic coating for extreme boiling performance10.1021/acsami.0c01594 ↗
6. Recent advances in heat transfer enhancements: a review report10.1155/2010/106461 ↗
7. Enhanced pool-boiling heat transfer and critical heat flux on femtosecond laser processed stainless steel surfaces10.1016/j.ijheatmasstransfer.2014.11.023 ↗
8. Martin · 2011
9. Effect of laser shot peening without coating on the surface properties and corrosion behavior of 316L steel10.1016/j.optlaseng.2012.07.007 ↗
10. Microstructure and corrosion properties of laser surface processed aluminium alloys: a review10.1016/S0921-5093(97)00034-8 ↗
11. Fabrication of mechanically enhanced superhydrophobic surface using nanosecond laser-based high-throughput surface nanostructuring (nHSN)10.1016/j.procir.2020.02.107 ↗
12. Laser engineering of biomimetic surfaces10.1016/j.mser.2020.100562 ↗
13. A vapor-phase deposited polymer film to improve the adhesion of electroless-deposited copper layer onto various kinds of substrates10.1021/la404251h ↗
14. Structural, optical and electrical properties of chemically deposited nonstoichiometric copper indium diselenide films10.1007/BF02914085 ↗
15. A simple approach to the fabrication of graphene-carbon nanotube hybrid films on copper substrate by chemical vapor deposition10.1016/j.jmst.2014.11.027 ↗
16. Preparation and study of structural and optical properties of chemical bath deposited copper indium diselenide thin films10.1002/1521-396X(200205)191:1<149::AID-PSSA149>3.0.CO;2-F ↗
17. A review of chemical vapour deposition of graphene on copper10.1039/C0JM02126A ↗
18. Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system10.1186/1556-276X-6-297 ↗
19. Pool boiling heat transfer enhancement using femtosecond laser surface processed aluminum in saturated PF-5060
20. Emissivity prediction of functionalized surfaces using artificial intelligence10.1016/j.jqsrt.2022.108325 ↗
21. Near-unity broadband omnidirectional emissivity via femtosecond laser surface processing10.1038/s43246-021-00139-w ↗
22. Creation of micro/nano surface structures on silver using collinear double femtosecond laser pulses with different pulse separation10.1007/s41939-018-0011-2 ↗
23. Comparison of self-organized micro/nanostructure formation on copper using dual-pulse versus single-pulse femtosecond laser surface processing
24. Broadband light absorption by tapered metal-dielectric multilayered grating structures10.1016/j.optcom.2015.12.006 ↗
25. Fabrication of a void array in dielectric materials by femtosecond laser micro-processing for compact photonic devices10.1007/s00339-010-5942-3 ↗
26. Simulation of microscale densification during femtosecond laser processing of dielectric materials10.1007/s00339-004-2576-3 ↗
27. Ultrashort-pulse laser machining of dielectric materials10.1063/1.370197 ↗
28. Surface and microstructure investigation of picosecond versus femtosecond laser pulse processed copper10.1016/j.surfcoat.2021.126872 ↗
29. Zuhlke · 2012
30. Ultrafast laser direct writing and nanostructuring in transparent materials10.1364/AOP.6.000293 ↗
31. Femtosecond-laser ablation dynamics of dielectrics: basics and applications for thin films10.1088/0034-4885/76/3/036502 ↗
32. Ultrafine and nanoparticle formation and emission mechanisms during laser processing of ceramic materials10.1016/j.jaerosci.2015.05.013 ↗
33. Investigation on the effects of laser parameters on the plasma profile of copper using picosecond laser induced plasma spectroscopy10.1007/s11082-020-02381-x ↗
34. Femtosecond laser-induced periodic surface structures of copper: experimental and modeling comparison10.1016/j.apsusc.2018.11.059 ↗
35. A computational study of heat transfer and material removal in picosecond laser micro-grooving of copper10.1016/j.optlastec.2020.106792 ↗
36. Picosecond laser-induced periodic surface structures (LIPSS) on crystalline silicon
37. Formation of conical microstructures of silicon with picosecond laser pulses in air10.2961/jlmn.2006.01.0003 ↗
38. Evolution of silicon surface microstructures by picosecond and femtosecond laser irradiations10.1016/j.apsusc.2004.09.113 ↗
39. Mechanisms of intraocular photodisruption with picosecond and nanosecond laser pulses10.1002/lsm.1900150106 ↗
40. Progress in ultrafast laser processing and future prospects10.1515/nanoph-2016-0004 ↗
41. Femtosecond laser processing of biodegradable polymers10.3390/app8071123 ↗
42. Modification thresholds in femtosecond laser processing of pure silica: review of dependencies on laser parameters [Invited]10.1364/OME.1.000766 ↗
43. Peng · 2017
44. Experimental explanation of the formation mechanism of surface mound-structures by femtosecond laser on polycrystalline Ni 60 Nb 4010.1063/1.4939983 ↗
45. Self assembled nanoparticle aggregates from line focused femtosecond laser ablation10.1364/OE.18.004329 ↗
46. Investigation of femtosecond laser induced ripple formation on copper for varying incident angle10.1063/1.5020029 ↗
47. Fundamentals of layered nanoparticle covered pyramidal structures formed on nickel during femtosecond laser surface interactions10.1016/j.apsusc.2013.07.002 ↗
48. Comparison of the structural and chemical composition of two unique micro/nanostructures produced by femtosecond laser interactions on nickel10.1063/1.4821452 ↗
49. Comparison of structure and properties of femtosecond and nanosecond laser-structured silicon10.1063/1.1667004 ↗
50. Ultraviolet femtosecond, picosecond and nanosecond laser microstructuring of silicon: structural and optical properties10.1364/AO.47.001846 ↗
51. Laser microstructuring of Si surfaces for low-threshold field-electron emission
52. Heat-affected zone and ablation rate of copper ablated with femtosecond laser10.1063/1.1852692 ↗
53. Short-pulse laser - plasma interactions10.1088/0741-3335/38/6/001 ↗
54. Paschotta · 2008
55. Field guide to laser pulse generation
56. Introducing a new optimization tool for femtosecond laser-induced surface texturing on titanium, stainless steel, aluminum and copper10.1016/j.optlaseng.2014.09.017 ↗
57. Femtosecond laser structuring of titanium implants10.1016/j.apsusc.2007.03.006 ↗
58. Polarization and angular effects of femtosecond laser-induced conical microstructures on Ni10.1063/1.4704394 ↗
59. Direct femtosecond laser surface nano/microstructuring and its applications10.1002/lpor.201200017 ↗
60. Hecht · 2002
61. Heat transfer behavior of as-processed and cleaned picosecond pulse laser processed copper
62. Experimental explanation of the formation mechanism of surface mound-structures by femtosecond laser on polycrystalline Ni 60 Nb 4010.1063/1.4939983 ↗
63. Formation of aggregated nanoparticle spheres through femtosecond laser surface processing10.1016/j.apsusc.2017.05.094 ↗
64. Oxide layer reduction and formation of an aluminum nitride surface layer during femtosecond laser surface processing of aluminum in nitrogen-rich gases
65. Growth mechanisms of multiscale, mound-like surface structures on titanium by femtosecond laser processing10.1063/1.4990709 ↗
66. Anderson · 2019