journal article·2019-12Open access

Amorphous–nanocrystalline alloys: fabrication, properties, and applications

F.C. Li, T. Liu, J.Y. Zhang, S. Shuang, Q. Wang, A.D. Wang, J.G. Wang, Y. Yang

Abstract

Owing to their unique mechanical and functional properties, both amorphous and nanocrystalline alloys have attracted extensive research interest over the past decades. However, in spite of the tremendous efforts dedicated to both kinds of alloys, their engineering applications are still hindered today because some fundamental issues, such as low thermal stability and poor ductility, are yet to be solved. To overcome these issues, one recent strategy proposed is to combine both amorphous and nanocrystalline structures in a single alloy through the use of either an amorphous or a nanocrystalline alloy as a “template”. On the one hand, the derived amorphous–nanocrystalline alloys may inherit the unique properties from either the amorphous or the nanocrystalline “template”, such as outstanding magnetic properties, extraordinary wear/corrosion resistance, and superior hardness and strength. On the other hand, these amorphous–nanocrystalline alloys also exhibit enhanced thermal stability and ductility, which are difficult to achieve for either the amorphous or the nanocrystalline alloy template. In this review article, we would like to first discuss a number of experimental methods developed to fabricate amorphous–nanocrystalline alloys, including partial crystallization in amorphous precursors, grain boundary amorphization, and physical vapor deposition. After that, we will give an overview of the mechanical and functional properties of the amorphous–nanocrystalline alloys. Finally, we will have a discussion on the existing applications of the amorphous–nanocrystalline alloys in various areas such as renewable and green energy, catalysis, and surface protection.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Diamond and Carbon-based Materials Research · Nonlinear Optical Materials Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Gleiter · 1989 · vol. 33 · 223
2. Nanocrystalline materials–Current research and future directions10.1023/A:1011026900989 ↗
3. Nanocrystalline materials in catalysis and electrocatalysis: structure tailoring and surface reactivity10.1016/0965-9773(95)00308-8 ↗
4. Mechanical behavior of nanocrystalline metals and alloys10.1016/j.actamat.2003.08.032 ↗
5. Non-crystalline structure in solidified gold–silicon alloys10.1038/187869b0 ↗
6. Characterization of amorphous alloy films10.1016/0025-5408(68)90059-7 ↗
7. Electrical resistance and thermoelectric power of an amorphous Te 70 Cu 25 Au 5 alloy10.1103/PhysRev.170.775 ↗
8. Evidence of a glass–liquid transition in a gold–germanium–silicon alloy10.1063/1.1669483 ↗
9. A rapid quenching technique for the preparation of thin uniform films of amorphous solids10.1063/1.1684774 ↗
10. Production of large samples of ultra-rapidly quenched alloys of aluminium by means of a rotating mill device10.1088/0022-3735/3/12/420 ↗
11. Under what conditions can a glass be formed?10.1080/00107516908204405 ↗
12. Glass-forming ability of alloys10.1016/0022-3093(93)90003-G ↗
13. Bulk glass-forming metallic alloys: science and technology10.1557/S0883769400053252 ↗
14. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
15. Zr–Al–Ni amorphous alloys with high glass transition temperature and significant supercooled liquid region10.2320/matertrans1989.31.177 ↗
16. Amorphous Zr–Al–TM (TM= Co, Ni, Cu) alloys with significant supercooled liquid region of over 100 K10.2320/matertrans1989.32.1005 ↗
17. New amorphous Mg-Ce-Ni alloys with high strength and good ductility10.1143/JJAP.27.L2248 ↗
18. Al–La–Ni amorphous alloys with a wide supercooled liquid region10.2320/matertrans1989.30.965 ↗
19. Thermal and mechanical properties of Ti–Ni–Cu–Sn amorphous alloys with a wide supercooled liquid region before crystallization10.2320/matertrans1989.39.1001 ↗
20. Fe-based ferromagnetic glassy alloys with wide supercooled liquid region10.2320/matertrans1989.36.1180 ↗
21. Multicomponent Co-based amorphous alloys with wide supercooled liquid region10.2320/matertrans1989.37.1332 ↗
22. Preparation of new Ni-based amorphous alloys with a large supercooled liquid region10.2320/matertrans1989.40.258 ↗
23. A highly processable metallic glass: Zr41. 2Ti13. 8Cu12. 5Ni10. 0Be22. 510.1063/1.110520 ↗
24. Preparation of 16 mm diameter rod of amorphous Zr65Al7. 5Ni10Cu17. 5 alloy10.2320/matertrans1989.34.1234 ↗
25. Production of amorphous cylinder and sheet of La55Al25Ni20 alloy by a metallic mold casting method10.2320/matertrans1989.31.425 ↗
26. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
27. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
28. A highly efficient and self-stabilizing metallic-glass catalyst for electrochemical hydrogen generation10.1002/adma.201603880 ↗
29. Rapid degradation of azo dye by Fe-based metallic glass powder10.1002/adfm.201103015 ↗
30. Nanocrystalline materials an approach to a novel solid structure with gas-like disorder?10.1016/0375-9601(84)90300-1 ↗
31. Structural and thermodynamic properties of heavily mechanically deformed Ru and AlRu10.1063/1.342541 ↗
32. A new method for synthesizing nanocrystalline alloys10.1063/1.347698 ↗
33. Surface nanocrystallization of iron induced by ultrasonic shot peening10.1016/S0965-9773(99)00324-4 ↗
34. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
35. Synthesis, structure and properties of electroplated nanocrystalline materials10.1016/0965-9773(93)90180-J ↗
36. Nanocrystalline materials and coatings10.1016/j.mser.2004.07.001 ↗
37. Thermal stability of nanocrystalline materials: thermodynamics and kinetics10.1080/09506608.2016.1257536 ↗
38. Grain-boundary migration and grain growth10.1179/msc.1974.8.1.143 ↗
39. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
40. Rate of crystallization of an amorphous Fe-P-C alloy10.1016/0022-3093(70)90192-4 ↗
41. The study of transformation kinetics of the amorphous Pd-Si alloys10.1016/0022-3093(76)90028-4 ↗
42. Thermal instability and crystallization characteristics of amorphous metal-metalloid system
43. Investigations of the structure of amorphous and partially crystalline metallic alloys by high resolution electron microscopy10.1111/j.1365-2818.1980.tb04077.x ↗
44. Influence of crystallinity on corrosion behavior of ferrous alloys10.5006/0010-9312-32.4.155 ↗
45. Magnetic properties of crystalline and amorphous alloys: a systematic discussion based on the Rhodes-Wohlfarth plot10.1016/0304-8853(78)90163-4 ↗
46. Crystallization temperature and hardness of new chromium-based amorphous alloys10.2320/matertrans1960.20.255 ↗
47. New Fe-based soft magnetic alloys composed of ultrafine grain structure10.1063/1.342149 ↗
48. Electron microscopy of crystalline and amorphous Ni-P electrodeposited films: in-situ crystallization of an amorphous solid10.1007/BF02661817 ↗
49. Nanocrystalline–amorphous transitions in Al–Mo thin films: bulk and surface evolution10.1016/j.actamat.2009.05.029 ↗
50. Microstructural evolution, mechanical properties and deformation mechanisms of nanocrystalline Cu thin films alloyed with Zr10.1016/j.actamat.2014.04.041 ↗
51. Dual-phase nanostructuring as a route to high-strength magnesium alloys10.1038/nature21691 ↗
52. Electrodeposited Al–Mn alloys with microcrystalline, nanocrystalline, amorphous and nano-quasicrystalline structures10.1016/j.actamat.2009.04.030 ↗
53. Increase in rate of electrodeposition and in Ni (II) concentration in the bath as a way to control grain size of amorphous/nanocrystalline Ni-W alloys10.1007/s100080100225 ↗
54. Resonance properties and microstructure of ultracompliant metallic nanoelectromechanical systems resonators synthesized from Al–32 at.% Mo amorphous-nanocrystalline metallic composites10.1063/1.2841849 ↗
55. High-temperature stability and grain boundary complexion formation in a nanocrystalline Cu-Zr alloy10.1007/s11837-015-1644-9 ↗
56. Amorphous intergranular films as toughening structural features10.1016/j.actamat.2015.02.012 ↗
57. Grain coarsening inhibited by solute segregation10.1016/S1359-6454(01)00338-X ↗
58. Formation, stability and structure of palladium-silicon based alloy glasses10.1016/0001-6160(69)90048-0 ↗
59. Flash annealing nanocrystallization of Fe-Si-B-based glasses10.1016/0921-5093(92)90104-9 ↗
60. Rapid nanocrystallization of soft-magnetic amorphous alloys using microwave induction heating10.1016/j.scriptamat.2008.09.019 ↗
61. Nanocrystallization of amorphous Al88Y7Fe5 alloy induced by plastic deformation10.1016/j.scriptamat.2005.06.004 ↗
62. Effect of cold-rolling on the crystallization behavior of amorphous Al88Y7Fe5 alloy10.1016/j.msea.2003.10.059 ↗
63. A novel structural gradient metallic glass composite with enhanced mechanical properties10.1016/j.scriptamat.2009.05.046 ↗
64. Superior tensile ductility in bulk metallic glass with gradient amorphous structure10.1038/srep04757 ↗
65. Ball milling-induced nanocrystal formation in aluminum-based metallic glasses10.1016/0956-7151(95)90264-3 ↗
66. Electron irradiation-induced nanocrystallization of amorphous Fe85B15 alloy: evidence for athermal nature10.1016/j.actamat.2008.11.009 ↗
67. Phase stability of amorphous and crystalline phases in melt-spun Zr66. 7Cu33. 3 alloy under electron irradiation10.1016/S1359-6462(03)00056-3 ↗
68. Nanometer-scale tunnel formation in metallic glass by helium ion irradiation10.1063/1.4734399 ↗
69. TEM studies of the FeSiB amorphous alloy nanocrystallized by means of Nd: YAG-pulsed laser heating10.1016/S0254-0584(03)00029-4 ↗
70. Microstructure of fragile metallic glasses inferred from ultrasound-accelerated crystallization in Pd-based metallic glasses10.1103/PhysRevLett.95.245501 ↗
71. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
72. High-strength Zr-based bulk amorphous alloys containing nanocrystalline and nanoquasicrystalline particles10.1016/S1468-6996(00)00009-7 ↗
73. J.H. Perepezko. Nanocrystallization in Al-rich metallic glasses10.1002/adem.200390019 ↗
74. Amorphous aluminum alloys—synthesis and stability10.1007/BF02822618 ↗
75. Relation between short-range order and crystallization behavior in Zr-based amorphous alloys10.1063/1.1313255 ↗
76. Investigation of short-range order in nanocrystal-forming Zr 60 Cu 20 Pd 10 Al 10 metallic glass and the mechanism of nanocrystal formation10.1063/1.1404128 ↗
77. Influence of the liquid states on the crystallization process of nanocrystal-forming Zr–Cu–Pd–Al metallic glasses10.1063/1.125415 ↗
78. Atomic-scale structural evolution and stability of supercooled liquid of a Zr-based bulk metallic glass10.1103/PhysRevLett.106.215505 ↗
79. Nucleation and thermal stability of an icosahedral nanophase during the early crystallization stage in Zr-Co-Cu-Al metallic glasses10.1016/j.actamat.2017.04.044 ↗
80. Crystallization and nanoindentation behavior of a bulk Zr–Al–Ti–Cu–Ni amorphous alloy10.1557/JMR.2000.0114 ↗
81. Formation of nanocrystals based on decomposition in the amorphous Zr41. 2Ti13. 8Cu12. 5Ni10Be22. 5 alloy10.1063/1.116377 ↗
82. Microstructure, decomposition, and crystallization in Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 bulk metallic glass10.1103/PhysRevB.57.8211 ↗
83. In situ synchrotron study of phase transformation behaviors in bulk metallic glass by simultaneous diffraction and small angle scattering10.1103/PhysRevLett.91.265501 ↗
84. Early crystallization stages in a Zr–Cu–Ni–Al–Ti metallic glass10.1016/j.actamat.2005.01.022 ↗
85. Identification of nanocrystal nucleation and growth in Al 85 Ni 5 Y 8 Co 2 metallic glass with quenched-in nuclei10.1063/1.1476388 ↗
86. Atomic packing in multicomponent aluminum-based metallic glasses10.1016/j.actamat.2008.08.049 ↗
87. Local chemical and topological order in Al–Tb and its role in controlling nanocrystal formation10.1016/j.actamat.2011.11.008 ↗
88. Correlation between medium-range order structure and glass-forming ability for Al-based metallic glasses10.1063/1.4863404 ↗
89. A geometric model for atomic configurations in amorphous Al alloys10.1016/S0022-3093(02)01917-8 ↗
90. Primary crystallization in Al-rich metallic glasses at unusually low temperatures10.1016/j.actamat.2010.03.035 ↗
91. Nanocrystal development during primary crystallization of amorphous alloys10.1016/S1359-6454(97)00279-6 ↗
92. Devitrification sequence map in the glass forming Al–Ni–Gd system10.1016/j.scriptamat.2005.07.021 ↗
93. Cu clustering and Si partitioning in the early crystallization stage of an Fe73. 5Si13. 5B9Nb3Cu1 amorphous alloy10.1016/S1359-6454(98)00392-9 ↗
94. Atom probe tomography study of ultrahigh nanocrystallization rates in FeSiNbBCu soft magnetic amorphous alloys on rapid annealing10.1016/j.actamat.2014.01.031 ↗
95. High performance Fe-based nanocrystalline alloys with excellent thermal stability10.1016/j.jallcom.2018.10.319 ↗
96. Crystallisation kinetics and microstructure development in metallic systems10.1016/S0079-6425(00)00021-9 ↗
97. Amorphization of intermetallic compounds under irradiation—a review10.1016/S0022-3115(96)00740-4 ↗
98. Solid state amorphization of intermetallic compounds by hydrogenation10.1016/0925-8388(93)90009-C ↗
99. Formation of an amorphous alloy by solid-state reaction of the pure polycrystalline metals10.1103/PhysRevLett.51.415 ↗
100. Pressure induced amorphization of materials10.1016/0079-6425(95)00006-2 ↗