journal article·2026-03Open access

A dimensionless rheology-based extrusion map as a predictive tool for hot-melt extrusion processability

Dan Trunov, Lukáš Berčík, Samuel Kriška, Albert Behner, Miroslav Šoóš

Abstract

Predicting the processability of polymeric materials in hot-melt extrusion remains a critical challenge in continuous manufacturing due to the complex transition from powder feeding to melt flow under dynamic processing conditions. In this work, we present a unified and predictive methodology for construction an extrusion processability map based on dimensionless rheological criteria. The framework first assesses powder feeding behavior using solid-state indicators, including the flowability index ( f f c ), friction ratio ( F R ), and Froude number ( F r d ), to characterize feed consistency and uniformity. The analysis is subsequently extended to the melt-processing stage in a twin-screw extruder, where extrudability is described using dimensionless numbers that capture viscous, elastic, and inertial effects, namely the Bingham ( B n ), Deborah ( D e ), Weissenberg ( W i ), and Reynolds ( R e ) numbers, along with the die swell ( B ) parameter. These criteria are integrated into a first-order predictive model that enables identification of stable extrusion processing windows. The resulting processability map provides mechanistic insight into the behavior of polymeric systems under defined operating conditions, reducing reliance on empirical trial-and-error approaches. Early identification of processing limitations supports efficient process optimization, leading to reduced material waste, lower energy consumption, and a smaller environmental footprint. While demonstrated using pharmaceutical polymer systems, the proposed methodology is broadly applicable to extrusion-based manufacturing across materials and chemical engineering.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Rheology and Fluid Dynamics Studies · Polymer crystallization and properties · Granular flow and fluidized beds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Rauwendaal · 2001
2. Engineering aspects of Single- and twin-screw extrusion-cooking of biopolymers10.1016/0260-8774(83)90008-0 ↗
3. Dynamical modelling and control of plastics extrusion processes10.1016/0005-1098(77)90042-5 ↗
4. Chung · 2011
5. Food extrusion
6. Pharmaceutical applications of hot-melt extrusion: part I10.1080/03639040701498759 ↗
7. The importance of monitoring process parameters as a method for quality control for hot melt extrusion
8. Role of rheology in formulation and process design of hot melt extruded amorphous solid dispersions10.1016/j.ijpharm.2024.124651 ↗
9. Ironing process optimization for enhanced properties in material extrusion technology using box–behnken design10.1038/s41598-024-52827-5 ↗
10. Prediction of the thermal phase diagram of amorphous solid dispersions by flory–huggins theory10.1002/jps.22541 ↗
11. Rheological study of copovidone and solid dispersion blend used for hot melt extrusion10.1002/app.43278 ↗
12. Rational development of solid dispersions via hot-melt extrusion using screening, material characterization, and numeric simulation tools10.1002/jps.23592 ↗
13. Molecular dynamics simulations for drug dosage form development: thermal and solubility characteristics for hot-melt extrusion10.1080/08927020802411695 ↗
14. Prediction of solubility parameters and miscibility of pharmaceutical compounds by molecular dynamics simulations10.1021/jp108540n ↗
15. Towards predicting the product quality in hot-melt extrusion: pilot plant scale extrusion
16. Residence time modeling of hot melt extrusion processes10.1016/j.ejpb.2013.07.019 ↗
17. Comparison between 1D and 3D approaches for twin-screw extrusion simulation10.3139/217.2951 ↗
18. Modelling the solids inflow and solids conveying of single-screw extruders using the discrete element method10.1016/j.powtec.2005.03.001 ↗
19. Characteristic parameters and process maps for fully-filled twin-screw extruder elements10.1016/j.ces.2020.116202 ↗
20. Residence time distribution of a pharmaceutical grade polymer melt in a single screw extrusion process10.1016/j.cherd.2008.10.008 ↗
21. Predicting melt rheology for hot-melt extrusion by means of a simple Tg-measurement10.1016/j.ejpb.2017.05.010 ↗
22. Characterizing powders in order to determine their flow behavior in a mixer: from small scale observations to macroscopic in-Mixer rheology for powders of various flowabilities10.1016/j.powtec.2017.07.075 ↗
23. PAT tools for the control of Co-Extrusion implants manufacturing process10.1016/j.ijpharm.2013.09.040 ↗
24. Manufacturing and quality assurance
25. Upscaling and In-line process monitoring via spectroscopic techniques of ethylene vinyl acetate hot-melt extruded formulations10.1016/j.ijpharm.2012.09.037 ↗
26. In-line NIR spectroscopy for the understanding of polymer–drug interaction during pharmaceutical hot-melt extrusion10.1016/j.ejpb.2012.01.001 ↗
27. Development of amorphous solid dispersions of cannabidiol: influence of the carrier, the hot-melt extrusion parameters and the use of a crystallization inhibitor
28. Paar · 2008
29. Comparison of three rotational shear cell testers: powder flowability and bulk density10.1016/j.powtec.2015.04.027 ↗
30. Effects of shear cell size on flowability of powders measured using a ring shear tester10.1016/j.powtec.2021.11.015 ↗
31. Schulze · 2007
32. 1 - mechanical characteristics of divided solids
33. Carr · 1965
34. Mezger · 2014
35. Mezger · 2015
36. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
37. Tschoegl · 1989
38. Ferry · 1980
39. Determination of discrete relaxation and retardation time spectra from dynamic mechanical data10.1007/BF01332922 ↗
40. Fractional rheology of colloidal hydrogels with cellulose nanofibers10.1007/s10570-023-05694-8 ↗
41. Generalized vs. fractional: a comparative analysis of maxwell models applied to entangled polymer solutions10.1039/D4SM00749B ↗
42. Food and feed extrusion technology: an applied approach to extrusion theory
43. Flow analysis of screw extrusion in three-dimensional concrete printing10.1063/5.0193235 ↗
44. Budynas · 2011 · 9
45. A general flowability index for powders10.1016/0032-5910(73)80089-0 ↗
46. Flow property measurement of food powders and sensitivity of Jenike's Hopper design methodology to the measured values10.1016/S0260-8774(03)00147-X ↗
47. The wall friction properties of pharmaceutical powders, blends, and granulations10.1016/j.xphs.2018.10.019 ↗
48. Yang · 2003
49. 2024
50. The Deborah number10.1063/1.3051374 ↗
51. Bird · 1987 · 1
52. Application of a shear cell for the simulation of extrusion to test the structurability of raw materials10.1016/j.foodhyd.2024.110736 ↗
53. Pipkin · 2012
54. Instantaneous dimensionless numbers for transient nonlinear rheology10.1007/s00397-019-01150-2 ↗
55. Die Swell and Normal Stresses: an Explanation10.5254/1.3535721 ↗
56. A theory of die-swell10.1002/pol.1970.160081203 ↗
57. Compositional dependence of the fragility in metallic glass forming liquids10.1038/s41467-022-31314-3 ↗
58. Formation of glasses from liquids and biopolymers10.1126/science.267.5206.1924 ↗