journal article·2026-06Open access

In-situ formation of copper nanoparticles using organometallic copper(II) formate-amine complexes

Nihesh Mohan, Nicola Ballin, Fosca Conti, Gordon Elger

Abstract

Copper(II) formate tetrahydrate is complexed with three amine ligands: amino-2-propanol, hexylamine and 2-(ethylamino)ethanol to develop copper particle-free inks for low-temperature (<130 °C) in-situ formation of copper nanoparticles for printed electronics. This study investigates how ligand structure influences complex formation, thermal decomposition behaviour and the resulting particle morphology. Fourier transform infrared spectroscopy confirms coordination between copper(II) formate and the amines through characteristic shifts in N-H and formate-related bands, indicating ligand-dependent coordination strength. Differential scanning calorimetry and thermogravimetric analysis show that complexation significantly reduces the decomposition temperature compared to pristine copper(II) formate, enabling formation below 150 °C. Activation energies determined using Kissinger and Ozawa methods range from 96 to 103 kJ/mol, lower than that of pristine copper(II) formate (∼115 ± 10 kJ/mol), demonstrating that amine ligands decrease the energy barrier for copper(II) reduction. Scanning electron microscopy reveals that thermal processing parameters (temperature, time and heating rate) and ligand structure strongly affect the formation of particles. Hexylamine produces uniform, densely packed spherical particles (0.3-1.2 μm) with low porosity across the investigated temperature range. Amino-2-propanol yields small particles (0.4-0.6 μm) only at 130 °C, whereas lower temperatures lead to agglomeration. In contrast, 2-(ethylamino)ethanol results in irregular and porous particles due to weaker coordination and higher volatility. Overall, ligand structure governs decomposition kinetics and particle morphology, providing a rational basis of designing low-temperature Cu particle-free inks for flexible printed electronics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A new frontier of printed electronics: flexible hybrid electronics10.1002/adma.201905279 ↗
2. Suganuma · 2014 · 74
3. 3D printed electronics: processes, materials and future trends10.1016/j.pmatsci.2022.100945 ↗
4. A review on printed electronics: fabrication methods, inks, substrates, applications and environmental impacts
5. Conductive nanomaterials for printed electronics10.1002/smll.201303000 ↗
6. Novel approach to copper sintering using surface enhanced brass micro flakes for microelectronics packaging10.1016/j.jallcom.2020.156043 ↗
7. Die-attach bonding with etched micro brass metal pigment flakes for high-power electronics packaging10.1021/acsaelm.1c00721 ↗
8. Preparation of conductive Cu patterns by directly writing using nano-Cu ink10.1016/j.matchemphys.2014.02.045 ↗
9. Self-reducible Cu nanoparticles for conductive inks10.1021/acs.iecr.7b04248 ↗
10. Air-stable, surface-oxide free Cu nanoparticles for highly conductive Cu ink and their application to printed graphene transistors10.1039/c3tc00904a ↗
11. Metal particle-free inks for printed flexible electronics10.1039/C9TC05463D ↗
12. Laser sintering of Cu particle-free inks for high-performance printed electronics10.1038/s41528-025-00389-5 ↗
13. Comparison of in situ and ex situ methods for synthesis of two-photon polymerization polymer nanocomposites10.3390/polym6072037 ↗
14. In situ generation of nanoparticles on and within polymeric materials10.3390/polym16111611 ↗
15. In situ synthesis of hybrid inorganic–polymer nanocomposites10.3390/polym10101129 ↗
16. Low-temperature synthesis of copper conductive film by thermal decomposition of copper–amine complexes10.1016/j.tsf.2011.04.112 ↗
17. Kinetic and thermodynamic studies of the nonisothermal decomposition of anhydrous copper (II) formate in different gas atmospheres10.1016/j.tca.2003.07.003 ↗
18. Understanding the importance of Cu (I) intermediates in self-reducing molecular inks for flexible electronics10.1021/acs.inorgchem.8b02493 ↗
19. A self-reducible and alcohol-soluble copper-based metal–organic decomposition ink for printed electronics10.1021/am4036306 ↗
20. Self-reduction of a copper complex MOD ink for inkjet printing conductive patterns on plastics10.1039/C4CC08749F ↗
21. Synergetic effect of blended alkylamines for copper complex ink to form conductive copper films10.1021/acs.langmuir.6b03668 ↗
22. The role of amine ligands in governing film morphology and electrical properties of copper films derived from copper formate-based molecular inks10.1039/C7NR08891D ↗
23. Low temperature sintering process of copper fine particles under nitrogen gas flow with Cu 2+-alkanolamine metallacycle compounds for electrically conductive layer formation10.1039/C5RA25058G ↗
24. Mechanistic insight into bis (amino) copper formate thermochemistry for conductive molecular ink design10.1021/acsami.0c08645 ↗
25. Scalable approaches to copper nanocrystal synthesis under ambient conditions for printed electronics10.1021/acsanm.0c00242 ↗
26. Effect of copper concentration in printable copper inks on film fabrication10.1016/j.tsf.2011.11.056 ↗
27. Effects of copper metal organic decomposition ink on properties of single-walled carbon nanotube based flexible transparent electrodes10.1016/j.synthmet.2023.117528 ↗
28. Self-reducible copper complex inks with two amines for copper conductive films via calcination below 100°C10.1016/j.cplett.2020.138248 ↗
29. Insight into the types of alkanolamines on the properties of copper (II) formate-based conductive ink10.1021/acs.langmuir.4c00221 ↗
30. Electrically conductive copper film prepared at low temperature by thermal decomposition of copper amine complexes with various amines10.1016/j.materresbull.2012.08.052 ↗
31. Water-soluble copper ink for the inkjet fabrication of flexible electronic components10.3390/ma14092218 ↗
32. Encapsulation of tricopper cluster in a synthetic cryptand enables facile redox processes from Cu I Cu I Cu I to Cu II Cu II Cu II states10.1039/D0SC05441K ↗
33. Composition and stability of copper (II) complexes with [2.2.2] cryptand in aqueous and aqueous ethanol solutions10.1134/S0036024421050162 ↗
34. Decomposition mechanism and morphological evolution of in situ realized Cu nanoparticles in Cu complex inks10.1039/D3NJ05185D ↗
35. Effect of the Amine concentration on phase evolution and densification in printed films using Cu (II) complex ink10.1021/acs.langmuir.5b01207 ↗
36. Low temperature die-attach bonding using copper particle free inks
37. Direct synthesis and bonding origins of monolayer-protected silver nanocrystals from silver nitrate through in situ ligand exchange10.1016/j.jcis.2006.08.037 ↗
38. Experimental analysis of volumetric, acoustic, viscometric and optical properties of water with 1-amino-2-propanol, 1, 2-diaminopropane and 1, 3-diaminopropane at T= 298.15-318.15 K: molecular modelling by graph, PFP and IR spectroscopy investigations10.1016/j.jtice.2023.105217 ↗
39. Intramolecular interactions in 2-aminoethanol and 3-aminopropanol10.1021/jp405512y ↗
40. Density, viscosity and excess properties for binary mixtures of 2-(ethylamino) ethanol and 2-(butylamino) ethanol with 2-butoxyethanol at temperatures from (293.15 to 353.15) K10.1016/j.molliq.2020.113351 ↗
41. Theory, production and mechanism of formation of monodispersed hydrosols10.1021/ja01167a001 ↗
42. Bevis · 2008 · 88
43. Reaction kinetics in differential thermal analysis10.1021/ac60131a045 ↗
44. On the calculation of activation energies using a modified Kissinger method10.1007/BF02055820 ↗
45. A new method of analyzing thermogravimetric data10.1246/bcsj.38.1881 ↗
46. Applications of kinetic methods in thermal analysis: a review
47. Thermal decomposition of three crystalline modifications of anhydrous copper (II) formate10.1021/j100619a006 ↗