Solving the problem of solidification cracking during additive manufacturing of CrMnFeCoNi high-entropy alloys through addition of Cr3C2 particles to enhance microstructure and properties
Source abstract
Abstract
In this study, TiAl and Cr3C2 particles were added to a high-entropy CrMnFeCoNi alloy through powder mixing and selective laser melting (SLM) with the aim of acquiring both high SLM processibility and an excellent combination of high strength and ductility with a post-process aging treatment. By only adding 4 at.% TiAl particles into CrMnFeCoNi, a number of cracks were found in as-printed samples for the processing conditions under investigation, promoted by a considerable increase in solidification range and gradient in the late stage of solidification. However, further addition of 2.5 at.% Cr3C2 particles into (CrMnFeCoNi)96(TiAl)4 reduced the solidification range and gradient, allowing to successfully suppress hot cracking. The as-printed (CrMnFeCoNi)96(TiAl)4 samples are characterized by γ grains each containing a group of cells oriented along a similar direction, with the matrix decorated by a small number of nano-sized Al2O3 and σ particles and the cell boundaries with segregated Ti. The addition of Cr3C2 transformed the segregated Ti at the cell boundaries into discrete TiC nanoparticles. On aging at 650 °C, a high density of long-range ordered domains with considerable B2 and σ precipitates formed. Compared to the SLM-processed CrMnFeCoNi, the as-printed (CrMnFeCoNi)96(TiAl)4 displays a reduced 0.2% yield strength and significantly reduced ductility due to the presence of cracks. Conversely, the as-printed (CrMnFeCoNi)96(TiAl)4 + Cr3C2 samples showed a slightly enhanced yield strength and considerably improved UTS. Aging significantly improves both strength properties while maintaining the good ductility. The long-range ordered domains and precipitation clearly are effective in impeding dislocation motion and can be considered to be the prime source of the increased strength of the dual-particle containing alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. High-entropy alloys10.1038/s41578-019-0121-4 ↗
4. Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures10.1038/s41467-020-20109-z ↗
5. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
6. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
7. Precipitation hardening of high entropy alloy CoCrFeMnNi containing titanium10.1016/j.jallcom.2020.157610 ↗
8. Role of recrystallization and second phases on mechanical properties of (CoCrFeMnNi)95.2Al3.2Ti1.6 high entropy alloy10.1016/j.msea.2021.141249 ↗
9. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
10. Thermal stability and coarsening of coherent particles in a precipitation-hardened (NiCoFeCr)94Ti2Al4 high-entropy alloy10.1016/j.actamat.2018.01.049 ↗
11. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
12. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property10.1016/j.jallcom.2018.02.298 ↗
13. Comprehensive assessment of the printability of CoNiCrFeMn in laser powder bed fusion10.1016/j.matdes.2020.108845 ↗
14. Revealing hot tearing mechanism for an additively manufactured high-entropy alloy via selective laser melting10.1016/j.scriptamat.2019.04.036 ↗
15. Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy10.1016/j.actamat.2020.116505 ↗
16. Microstructure evolution and cracking behaviors of additively manufactured AlxCrCuFeNi2 high entropy alloys via selective laser melting10.1016/j.jallcom.2020.155823 ↗
17. Selective laser melting of dual phase AlCrCuFeNix high entropy alloys: formability, heterogeneous microstructures and deformation mechanisms
18. Significant enhancement in tensile strength and work hardening rate in CoCrFeMnNi by adding TiAl particles via selective laser melting10.1016/j.msea.2021.142285 ↗
19. Hot tearing of nickel-based superalloys during directional solidification10.1016/S1359-6454(02)00042-3 ↗
20. A quest for a new hot tearing criterion10.1007/s11661-007-9169-7 ↗
21. Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting10.1016/j.actamat.2017.09.047 ↗
22. In situ observation of hot tearing formation in succinonitrile-acetone10.1016/S1359-6454(01)00013-1 ↗
23. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
24. Alloys-by-design: application to new superalloys for additive manufacturing10.1016/j.actamat.2020.09.023 ↗
25. Thermodynamics-guided alloy and process design for additive manufacturing10.1038/s41467-022-31969-y ↗
26. Effect of carbon content on the microstructure, tensile properties and cracking susceptibility of IN738 superalloy processed by laser powder bed fusion
27. A criterion for cracking during solidification10.1016/j.actamat.2015.01.034 ↗
28. Melt pool temperature and cooling rates in laser powder bed fusion
29. Prediction of cooling rate and microstructure in laser spot welds10.1179/136217103225005633 ↗
30. Promoting columnar-to-equiaxed transition in AlCoCrFeNi high entropy alloy during selective laser melting by adding Cr3C210.1080/21663831.2022.2106798 ↗
31. Effect of aging temperature on microstructure and mechanical properties of laser melted and hot isostatically pressed (CoCrFeMnNi)96(TiAl)4 alloy10.1016/j.jallcom.2022.168317 ↗
32. Influence of addition of TiAl particles on microstructural and mechanical property development in a selectively laser melted stainless steel10.1016/j.msea.2021.141925 ↗
33. Influence of addition of TiAl particles on microstructural and mechanical property development in Invar 36 processed by laser powder bed fusion
34. J.C. Lippold, S.D. Kiser, J.N. DuPont, Welding Metallurgy and Weldability of Nickel-Base Alloys, John Wiley & Sons2011.
35. Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys10.1016/j.actamat.2019.07.041 ↗
36. Misorientation-dependent solute enrichment at interfaces and its contribution to defect formation mechanisms during laser additive manufacturing of superalloys
37. A new hot-tearing criterion10.1007/s11661-999-0334-z ↗
38. Last-stage solidification of alloys: theoretical model of dendrite-arm and grain coalescence10.1007/s11661-003-0083-3 ↗
39. Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys10.1007/s11661-009-9858-5 ↗
40. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
41. Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures10.1016/j.intermet.2014.06.015 ↗
42. Precipitation hardening10.1007/BF02670416 ↗
43. Some new aspects concerning particle hardening mechanisms in γ' precipitating Ni-base alloys—I. Theoretical concept10.1016/0001-6160(82)90048-7 ↗
44. Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy10.1016/j.actamat.2021.116829 ↗
45. Strengthening mechanisms in a high-strength bulk nanostructured Cu–Zn–Al alloy processed via cryomilling and spark plasma sintering10.1016/j.actamat.2012.09.036 ↗