journal article·2024-03Open access

A new class of porous silicon electrochemical transducers built from pyrolyzed polyfurfuryl alcohol

Anandapadmanabhan A. Rajendran, Keying Guo, Alberto Alvarez-Fernandez, Thomas R. Gengenbach, Marina B. Velasco, Maximiliano J. Fornerod, Kandeel Shafique, Máté Füredi, Pilar Formentín, Hedieh Haji-Hashemi, Stefan Guldin, Nicolas H. Voelcker, Xavier Cetó, Beatriz Prieto-Simón

Abstract

Carbon-based nanomaterials are key to developing high-performing electrochemical sensors with improved sensitivity and selectivity. Nonetheless, limitations in their fabrication and integration into devices often constrain their practical applications. Moreover, carbon nanomaterials-based electrochemical devices still face problems such as large background currents, poor stability, and slow kinetics. To advance towards a new class of carbon nanostructured electrochemical transducers, we propose the in-situ polymerization and carbonization of furfuryl alcohol (FA) on porous silicon (pSi) to produce a tailored and highly stable transducer. The thin layer of polyfurfuryl alcohol (PFA) that conformally coats the pSi scaffold transforms into nanoporous carbon when subjected to pyrolysis above 600 °C. The morphological and chemical properties of PFA-pSi were characterized by scanning electron microscopy, and Raman and X-ray photoelectron spectroscopies. Their stability and electrochemical performance were investigated by cyclic voltammetry and electrochemical impedance spectroscopy in [Fe(CN)6]3-/4-, [Ru(NH3)6]2+/3+, and hydroquinone. PFA-pSi showed superior electrochemical performance compared to screen-printed carbon electrodes while also surpassing glassy carbon electrodes in specific aspects. Besides, PFA-pSi has the additional advantage of easy tuning of the electroactive surface area. To prove its potential for biosensing purposes, a DNA sensor based on quantifying the partial pore blockage of the pSi upon target hybridization was built on PFA-pSi. The sensor showed a limit of detection of 1.4 pM, outperforming other sensors based on the same sensing mechanism.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrochemical sensors and biosensors · Electrochemical Analysis and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (94)

Show source-provided references
1. Towards high-efficiency nanoelectrocatalysts for oxygen reduction through engineering advanced carbon nanomaterials10.1039/C5CS00414D ↗
2. Carbon nanomaterials field-effect-transistor-based biosensors10.1038/am.2012.42 ↗
3. A phosphomolybdic acid anion probe-based label-free, stable and simple electrochemical biosensing platform10.1039/C4CC03555K ↗
4. Recent advancement in disposable electrode modified with nanomaterials for electrochemical heavy metal sensors10.1080/10408347.2021.1950521 ↗
5. Carbon nanotube amplification strategies for highly sensitive immunodetection of cancer biomarkers10.1021/ja062117e ↗
6. Electrochemical immunosensor for casein based on gold nanoparticles and poly(L-Arginine)/multi-walled carbon nanotubes composite film functionalized interface10.1016/j.bios.2011.01.027 ↗
7. Label-free voltammetric aptasensor for the sensitive detection of microcystin-LR using graphene-modified electrodes10.1021/ac501335k ↗
8. Recent applications of carbon nanomaterials for microRNA electrochemical sensing10.1002/asia.202001260 ↗
9. Carbon nanomaterial-based electrochemical biosensors: an overview10.1039/C5NR00585J ↗
10. Engineered carbon-nanomaterial-based electrochemical sensors for biomolecules10.1021/acsnano.5b05690 ↗
11. Recent applications of carbon-based nanomaterials in analytical chemistry: critical review10.1016/j.aca.2011.02.025 ↗
12. Electrical and mechanical performance of graphene sheets exposed to oxidative environments10.1007/s12274-013-0326-6 ↗
13. Electrochemical sensors based on carbon nanotubes10.3390/s90402289 ↗
14. Graphene-based electrochemical sensor for detection of hepatocellular carcinoma markers10.3389/fchem.2022.883627 ↗
15. Review—recent progress in the graphene-based electrochemical sensors and biosensors10.1149/2.0282003JES ↗
16. Advantages and limitations of functionalized graphene-based electrochemical sensors for environmental monitoring10.1016/B978-0-12-823788-5.00009-0 ↗
17. 1996
18. Temperature-dependent electrical conductivity in thermally carbonized porous silicon10.1016/j.sna.2004.05.005 ↗
19. Thermally carbonized porous silicon and its recent applications10.1002/adma.201703819 ↗
20. Porous silicon nanostructures as effective faradaic electrochemical sensing platforms10.1002/adfm.201809206 ↗
21. Porous silicon membrane-modified electrodes for label-free voltammetric detection of MS2 bacteriophage10.1016/j.bios.2016.01.038 ↗
22. Sailor · 2012
23. Tailoring porous silicon for biomedical applications: from drug delivery to cancer immunotherapy
24. Rapid surface functionalization of hydrogen-terminated silicon by alkyl silanols10.1021/jacs.7b01106 ↗
25. Facile surface modification of hydroxylated silicon nanostructures using heterocyclic silanes10.1021/jacs.6b08614 ↗
26. Reactions of persistent carbenes with hydrogen-terminated silicon surfaces10.1021/jacs.6b04962 ↗
27. Carbon-stabilized porous silicon as novel voltammetric sensor platforms10.1016/j.electacta.2021.138077 ↗
28. Morphological and nanostructural features of porous silicon prepared by electrochemical etching10.1186/1556-276X-7-408 ↗
29. Oxidation of porous silicon and properties of its oxide film10.1143/JJAP.19.231 ↗
30. Comparison of the electrical properties and chemical stability of crystalline silicon(111) surfaces alkylated using grignard reagents or olefins with lewis acid catalysts10.1021/jp0222752 ↗
31. Chemical stability of porous silicon surfaces electrochemically modified with functional alkyl species10.1021/la035197y ↗
32. Amine modification of thermally carbonized porous silicon with silane coupling chemistry10.1021/la303091k ↗
33. Carbon and carbon/silicon composites templated in rugate filters for the adsorption and detection of organic vapors10.1002/adma.201004142 ↗
34. Graphitization of carbon fibre/glassy carbon composites10.1016/0008-6223(74)90067-0 ↗
35. Catalytic polymerization and facile grafting of poly(furfuryl alcohol) to single-wall carbon nanotube: preparation of nanocomposite carbon10.1021/ja063518x ↗
36. Ultrasonic deposition of high-selectivity nanoporous carbon membranes10.1126/science.285.5435.1902 ↗
37. Metal-supported carbogenic molecular sieve membranes: synthesis and applications10.1021/ie960769d ↗
38. Characterizations of crystalline structure and electrical properties of pyrolyzed polyfurfuryl alcohol10.1063/1.366434 ↗
39. Characterization of low thermal conductivity pan-based carbon fibers10.1016/0008-6223(94)90158-9 ↗
40. S. Mrozowski, Proceedings of the Fifth Conference on Carbon, Vol. 2.
41. Electrochemical biosensors featuring oriented antibody immobilization via electrografted and self-assembled hydrazide chemistry10.1021/ac401747j ↗
42. Optical detection of C2 hydrocarbons ethane, ethylene, and acetylene with a photonic crystal made from carbonized porous silicon10.1016/j.ica.2014.07.069 ↗
43. Optical detection of C2 hydrocarbons ethane, ethylene, and acetylene with a photonic crystal made from carbonized porous silicon10.1016/j.ica.2014.07.069 ↗
44. Evolution of ultramicroporous adsorptive structure in poly(furfuryl alcohol)-derived carbogenic molecular sieves10.1021/ie00027a018 ↗
45. Effect of pyrolysis temperature and operating temperature on the performance of nanoporous carbon membranes10.1016/j.memsci.2008.04.064 ↗
46. Influence of pyrolysis temperature and heating rate in the fabrication of carbon membrane: a review10.3923/jas.2014.1359.1364 ↗
47. Highly stable porous silicon-carbon composites as label-free optical biosensors10.1021/nn304131d ↗
48. Structural characterization of mesoporous thin film architectures: a tutorial overview10.1021/acsami.9b17899 ↗
49. Simple method for measuring the porosity, thickness and refractive index of porous silicon, based on the Fabry-Pérot interference spectrum10.17563/rbav.v35i3.1044 ↗
50. Biosensing using porous silicon double-layer interferometers: reflective interferometric fourier transform spectroscopy10.1021/ja0511671 ↗
51. Highly stable porous silicon-carbon composites as label-free optical biosensors10.1021/nn304131d ↗
52. Direct functionalization of silicon via the self-assembly of alcohols10.1039/ft9959104001 ↗
53. Chemical constitution of polyfurfuryl alcohol investigated by FTIR and Resonant Raman spectroscopy10.1016/j.saa.2021.120090 ↗
54. Understanding the polymerization of polyfurfuryl alcohol: ring opening and diels-alder reactions10.3390/polym11122126 ↗
55. Genesis of porosity in polyfurfuryl alcohol derived nanoporous carbon10.1016/j.carbon.2006.05.029 ↗
56. Characterizations of furfuryl alcohol oligomer/polymerization catalyzed by homogeneous and heterogeneous acid catalysts10.1007/s11814-014-0322-x ↗
57. Opening furan for tailoring properties of bio-based poly(furfuryl alcohol) thermoset10.1002/cssc.201800620 ↗
58. Chemical and crystalline structure characterizations of polyfurfuryl alcohol pyrolyzed at 600 °C10.1016/S0008-6223(97)00150-4 ↗
59. Raman scattering investigation of carbons obtained by heat treatment of a polyfurfuryl alcohol10.1016/0167-2738(96)00352-9 ↗
60. Characterizations of crystalline structure and electrical properties of pyrolyzed polyfurfuryl alcohol10.1063/1.366434 ↗
61. Chemical and crystalline structure characterizations of polyfurfuryl alcohol pyrolyzed at 600°C10.1016/S0008-6223(97)00150-4 ↗
62. Infrared and Raman selection rules for lattice vibrations: the correlation method10.1366/000370271779948600 ↗
63. Chemical and micro-structural changes in glass-like carbon during high temperature heat treatment10.1007/BF03218341 ↗
64. Thermally induced silane dehydrocoupling on silicon nanostructures10.1002/anie.201601010 ↗
65. Preparation, structure, and electrochemical properties of reduced graphene sheet films10.1002/adfm.200900377 ↗
66. Advanced carbon electrode materials for molecular electrochemistry10.1021/cr068076m ↗
67. Recent progress in the development of porous carbon-based electrodes for sensing applications10.1039/D1AN01978C ↗
68. On the electrochemical response of porous functionalized graphene electrodes10.1021/jp405142k ↗
69. Determination of the real surface area of a screen-printed electrode by chronocoulometry10.1016/S1452-3981(23)19475-2 ↗
70. A practical beginner’s guide to cyclic voltammetry10.1021/acs.jchemed.7b00361 ↗
71. A cross examination of electron transfer rate constants for carbon screen-printed electrodes using Electrochemical Impedance Spectroscopy and cyclic voltammetry10.1016/j.electacta.2018.08.021 ↗
72. Theory and application of cyclic voltammetry for measurement of electrode reaction kinetics10.1021/ac60230a016 ↗
73. Theory of stationary electrode polarography. Single scan and cyclic methods applied to reversible, irreversible, and kinetic systems10.1021/ac60210a007 ↗
74. An extended method for the practical evaluation of the standard rate constant from cyclic voltammetric data10.1002/elan.200302851 ↗
75. Thermally carbonized porous silicon and its recent applications10.1002/adma.201703819 ↗
76. Anomalously slow electron transfer at ordered graphite electrodes: influence of electronic factors and reactive sites10.1021/j100071a023 ↗
77. Designing electrochemical biosensing platforms using layered carbon-stabilized porous silicon nanostructures10.1021/acsami.2c02113 ↗
78. An efficient oxygen reduction electrocatalyst from graphene by simultaneously generating pores and nitrogen doped active sites10.1039/c2jm35128e ↗
79. Understanding the electric double-layer structure, capacitance, and charging dynamics10.1021/acs.chemrev.2c00097 ↗
80. Fundamental principals of battery design: porous electrodes, AIP
81. Mesoporous materials-based electrochemical sensors10.1002/elan.201400628 ↗
82. Control of electron transfer kinetics at glassy carbon electrodes by specific surface modification10.1021/ac960492r ↗
83. Electrochemical reduction of quinones in different media: a review10.4061/2011/816202 ↗
84. XPS analysis of glassy carbon electrodes chemically modified with 8-hydroxyquinoline-5-sulphonic acid10.1002/sia.3880 ↗
85. Glassy carbon electrodes: I. Characterization and electrochemical activation10.1016/S0008-6223(00)00228-1 ↗
86. Hermanson · 2013
87. Amine modification of thermally carbonized porous silicon with silane coupling chemistry10.1021/la303091k ↗
88. Nanostructured electrochemical biosensors for label-free detection of water- and food-borne pathogens10.1021/acsami.7b13943 ↗
89. Hyaluronic acid–modified porous silicon films for the electrochemical sensing of bacterial hyaluronidase
90. Ultrasensitive electrochemical biosensor of bacterial 16S rRNA gene based on polyA DNA probes10.1021/acs.analchem.9b02175 ↗
91. Sensing DNA hybridization via ionic conductance through a nanoporous electrode10.1021/la0471644 ↗
92. A novel electrochemical biosensor based on dynamic polymerase-extending hybridization for E. coli O157:H7 DNA detection10.1016/j.talanta.2008.12.001 ↗
93. Impedimetric DNA biosensor based on a nanoporous alumina membrane for the detection of the specific oligonucleotide sequence of dengue virus10.3390/s130607774 ↗
94. Nanoparticle based enhancement of electrochemical DNA hybridization signal using nanoporous electrodes10.1039/C0CC02683B ↗