journal article·2020-12

Ratiometric fluorescence In3+ sensing via In3+-triggered tautomerization: Its applications to water samples, live cells and zebrafish

Dongju Yun, Ju Byeong Chae, Haeri So, Trinh N. Do, Ki-Tae Kim, Yelim Yi, Mi Hee Lim, Cheal Kim

Dyes and Pigments· Volume 183
Publisher page

Abstract

Abstract A novel ratiometric fluorescence sensor NCS ((E)-N-(furan-2-ylmethyl)-2-(2-hydroxybenzylidene)hydrazine-1-carbothioamide) was synthesized by a combination of furfuryl isothiocyanate bearing hydrazine and salicylaldehyde. Sensor NCS exhibited a ratiometric fluorescent response toward In3+ via thioamide tautomerization with blue-shifted emission from 484 to 444 nm in a near-perfect aqueous solution. NCS displayed a linear ratiometric relationship to micromolar concentrations (0–60 μM) of In3+ and the detection limit was found to be 2.68 μM. Moreover, sensor NCS exhibited an excellent selectivity for sensing In3+ in real samples as well as live cell and zebrafish. The sensing mechanism was demonstrated through UV–visible, fluorescent and 1H NMR titrations, Job's plot, ESI-MS and theoretical calculations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Molecular Sensors and Ion Detection · Analytical Chemistry and Sensors · Luminescence and Fluorescent Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Background level of indium and gallium in soil with special reference to the pollution of the soils from zinc and lead smelters10.1002/jpln.19901530411 ↗
2. Processing of indium: a review10.1016/S0892-6875(03)00168-7 ↗
3. Present status of transparent conducting oxide thin-film development for Indium-Tin-Oxide (ITO) substitutes10.1016/j.tsf.2007.10.063 ↗
4. Recycling indium from waste LCDs: a review10.1016/j.resconrec.2015.07.015 ↗
5. Highly sensitive ratiometric fluorescent detection of indium(III) using fluorescent probe based on phosphoserine as a receptor10.1021/acs.analchem.8b01440 ↗
6. Spiropyran-isoquinoline dyad as a dual chemosensor for Co(II) and in(III) detection10.3390/molecules22091569 ↗
7. ESIPT-based anthraquinonylcalix[4]crown chemosensor for In3+10.1016/j.tetlet.2010.02.006 ↗
8. The anthrobiogeochemical cycle of indium: a review of the natural and anthropogenic cycling of indium in the environment10.1080/10643389.2010.498755 ↗
9. Indium(III)-induced fluorescent excimer formation and extinction in calix[4]arene-fluoroionophores10.1021/ic050702v ↗
10. Inductively coupled plasma atomic emission spectrometric determination of 27 trace elements in table salts after coprecipitation with indium phosphate10.1016/j.talanta.2009.04.025 ↗
11. Sensitive anodic stripping voltammetric determination of indium(III) traces following double deposition and stripping steps10.1149/2.0581704jes ↗
12. Indium determination and preconcentration using fiber optic linear array detection spectrometry combined with dispersive liquid-liquid micro extraction10.1134/S1061934811100078 ↗
13. Solid phase extraction and preconcentration of trace gallium, indium, and thallium using new modified amino silica10.1177/0003702816654166 ↗
14. Indium determination using slotted quartz tube-atom trap-flame atomic absorption spectrometry and interference studies10.1016/j.talanta.2011.07.006 ↗
15. A water-soluble carboxylic-functionalized chemosensor for detecting Al3+ in aqueous media and living cells: experimental and theoretical studies10.1016/j.bios.2015.02.038 ↗
16. A new fluorescence turn-on chemosensor for nanomolar detection of Al3+ constructed from a pyridine-pyrazole system10.1039/C7NJ03955G ↗
17. A thiophene-based blue-fluorescent emitting chemosensor for detecting indium (III) ion10.1016/j.inoche.2018.09.037 ↗
18. A new kind of rhodamine-based fluorescence turn-on probe for monitoring ATP in mitochondria10.1016/j.snb.2018.03.081 ↗
19. A new copper(II) selective fluorescence probe based on naphthalimide: synthesis, mechanism and application in living cells10.1016/j.inoche.2015.10.022 ↗
20. Fluorescent chemosensors: the past, present and future10.1039/C7CS00240H ↗
21. A sensitive and highly selective fluorescent sensor for In3+10.1039/c0ob00002g ↗
22. Selective chromo-fluorogenic detection of trivalent cations in aqueous environments using a dehydration reaction10.1039/C6NJ01957A ↗
23. A novel AIE chemosensor based on quinoline functionalized Pillar[5]arene for highly selective and sensitive sequential detection of toxic Hg2+ and CN−10.1016/j.dyepig.2019.01.049 ↗
24. Highly selective imidazole-appended 9,10-N,N′-diaminomethylanthracene fluorescent probe for switch-on Zn2+ detection and switch-off H2PO4− and CN− detection in 80% aqueous DMSO, and applications to sequential logic gate operations10.1016/j.snb.2017.03.112 ↗
25. A dual chemosensor for Zn2+ and Co2+ in aqueous media and living cells: experimental and theoretical studies10.1016/j.snb.2015.09.129 ↗
26. Turn-on selective fluorescent probe for trivalent cations10.1016/j.inoche.2013.08.025 ↗
27. Ratiometric fluorescent Zn2+ and In3+ receptors of fused pyrazine with an aminopropanol chain in acetonitrile10.1039/C3NJ00750B ↗
28. A dual target chemosensor for the fluorometric detection of In3+ and colorimetric detection of Fe3+10.1016/j.saa.2018.07.091 ↗
29. A highly selective fluorescent chemosensor for detecting indium(III) with a low detection limit and its application10.1007/s10895-018-2299-z ↗
30. A multifunctional selective “turn-on” fluorescent chemosensor for detection of Group IIIA ions Al3+, Ga3+ and In3+10.1039/c8pp00171e ↗
31. FRET-based rational strategy for ratiometric detection of Cu2+ and live cell imaging10.1016/j.snb.2012.09.071 ↗
32. BODIPY-based ratiometric fluorescent sensor for highly selective detection of glutathione over cysteine and homocysteine10.1021/ja309079f ↗
33. Carbon-dot-based ratiometric fluorescent sensor for detecting hydrogen sulfide in aqueous media and inside live cells10.1039/C2CC37329G ↗
34. New sensing mechanisms for design of fluorescent chemosensors emerging in recent years10.1039/c0cs00224k ↗
35. Rational design of FRET-based ratiometric chemosensors for in vitro and in cell fluorescence analyses of nucleoside polyphosphates10.1021/ja103615z ↗
36. A FRET-based ratiometric sensor for mercury ions in water with multi-layered silica nanoparticles as the scaffold10.1039/c1cc12544c ↗
37. A new pyridoxal based fluorescence chemo-sensor for detection of Zn(ii) and its application in bio imaging10.1039/C5RA15353K ↗
38. A new highly copper-selective fluorescence enhancement chemosensor based on BODIPY excitable with visible light and its imaging in living cells10.1016/j.snb.2015.10.037 ↗
39. Novel turn-on fluorescent sensors with mega Stokes shifts for dual detection of Al3+ and Zn2+10.1021/acssensors.5b00136 ↗
40. A new fluorescence chemosensor for selective detection of copper ion in aqueous solution10.1016/j.tetlet.2016.04.025 ↗
41. Synthesis and antitumor activity of 2-isocamphanyl thiosemicarbazone derivatives via ROS-enhanced mitochondrial damage
42. Thiosemicarbazone-based selective proliferation inactivators inhibit gastric cancer cell growth, invasion, and migration10.1039/C7MD00353F ↗
43. Naphthaldehyde-urea/thiourea conjugates as turn-on fluorescent probes for Al3+ based on restricted C=N isomerization10.1002/ejic.201100772 ↗
44. A highly selective fluorescent sensor for the detection of Al3+ and CN- in aqueous solution: biological applications and DFT calculations10.1039/C6NJ01544A ↗
45. An asymmetric naked-eye chemo-sensor for Cu2+ in aqueous solution10.1016/j.inoche.2014.11.016 ↗
46. Enhanced fluorescence quantum yield of syndiotactic side-chain TPE polymers via Rh-catalyzed carbene polymerization: influence of the substitution density and spacer length10.1039/C8PY01729H ↗
47. A highly selective turn-on chemosensor capable of monitoring Zn2+ concentrations in living cells and aqueous solution10.1016/j.snb.2015.03.108 ↗
48. A novel “off-on” type fluorescent chemosensor for detection of Zn2+ and its zinc complex for “on-off” fluorescent sensing of sulfide in aqueous solution, in vitro and in vivo10.1016/j.snb.2018.03.063 ↗
49. Frisch · 2013
50. Density‐functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
51. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
52. The influence of polarization functions on molecular orbital hydrogenation energies10.1007/BF00533485 ↗
53. Self‐consistent molecular orbital methods. XXIII. A polarization‐type basis set for second‐row elements10.1063/1.444267 ↗
54. Quantum calculation of molecular energies and energy gradients in solution by a conductor solvent model10.1021/jp9716997 ↗
55. Time-dependent density functional theory for molecules in liquid solutions10.1063/1.1394921 ↗
56. A spectrophotometric investigation of the interaction of iodine with aromatic hydrocarbons10.1021/ja01176a030 ↗
57. Zn2+-Triggered amide tautomerization produces a highly sensor
58. A styrylpyridinium dye as chromogenic and fluorogenic dual mode chemosensor for selective detection of mercuric ion: application in bacterial cell imaging and molecular logic gate10.1016/j.dyepig.2019.108054 ↗
59. Benzo[d]imidazo[2,1-b]thiazole-based fluorescent sensor for Zn2+ ion detection10.1016/j.jphotochem.2019.112184 ↗
60. Rational design and synthesis of Y-shaped fluorophores with multifarious emission properties and their application in sensitive detection of PA