Development of s-tetrazine-based polymers for efficient polymer solar cells by controlling appropriate molecular aggregation
Source abstract
Abstract
Abstract Two conjugated polymers PTTTz and PHTTz have been designed and synthesized by introducing s-tetrazine as electron-withdrawing moieties. Compared with PTTTz with 2-octyldodecyl-substituted tetrathiophene derivative as electron-donating moieties, PHTTz with hexyl- and 2-octyldodecyl-substituted hexathiophene derivative possesses relatively lower molecular coplanarity, larger stacking distance but more orderly molecular stacking, more red-shifted absorption, more suitable microphase separation, more efficient exciton dissociation, higher hole mobility, which lead to higher short-circuit current density (11.54 mA cm−2), fill factor (69.0%) and power conversion efficiency (PCE = 6.69%) values in PSCs. The PTTTz-based PSC shows an open circuit voltage of 1.02 V for its lower-ling HOMO energy level though the PCE of the PSC is only 5.16%. Moreover, the ternary PSC based PHTTz/PC71BM/ITIC exhibits a higher PCE value of 7.88% than the binary PSCs for more efficient exciton dissociation and complementary absorption spectrum in ternary blend film, which is one of the highest PCE values in s-tetrazine-based polymers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Recent development of push-pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures10.1039/c2jm30470h ↗
2. Overview of high-efficiency organic photovoltaic materials and devices10.1016/j.rser.2015.08.032 ↗
3. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
4. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
5. Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution10.1039/C4EE00446A ↗
6. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
7. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
8. 11.4% efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
9. A thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
10. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
11. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
12. Aggregation and morphology control eables mltiple cses of hgh-eficiency plymer slar cells10.1038/ncomms6293 ↗
13. A novel naphtho[1,2-c:5,6-c']bis([1,2,5]thiadiazole)-based narrow-bandgap pi-conjugated polymer with power conversion efficiency over 1010.1002/adma.201603178 ↗
14. An axisymmetric heptacyclic lactam unit for efficient polymer solar cells10.1039/C8TC01858H ↗
15. Rational design of a difluorobenzo c cinnoline-based low-bandgap copolymer for high-performance polymer solar cells10.1039/C7TA00495H ↗
16. Efficient polymer solar cells based on terpolymers with a broad absorption range of 300-900 nm10.1039/C4TA00020J ↗
17. Structures and properties of conjugated donor–acceptor copolymers for solar cell applications10.1039/c2jm14951f ↗
18. Quinoxaline-based conjugated polymers for polymer solar cells10.1039/C7PY00850C ↗
19. Molecular engineering of conjugated polymers for solar cells: an updated report10.1002/adma.201601391 ↗
20. Isoindigo-based conjugated polymer for high-performance organic solar cell with a high V-OC of 1.06 V as processed from non-halogenated solvent10.1016/j.dyepig.2018.09.048 ↗
21. Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells10.1039/C4EE03824J ↗
22. Suppressed charge recombination in inverted organic photovoltaics via enhanced charge extraction by using a conductive fullerene electron transport layer10.1002/adma.201402276 ↗
23. Cross-linkable and dual functional hybrid polymeric electron transporting layer for high-performance inverted polymer solar cells10.1002/adma.201701507 ↗
24. Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte10.1038/nphoton.2015.126 ↗
25. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO Film as an electron transport layer10.1002/adma.201004301 ↗
26. Effects of solvent vapour annealing on the performances of benzo 1,2-b:4,5-b ' dithiophene and 4,7-di(4-hexyl-thiophen-2-yl)-5,6-difluorine-2,1,3-benzothiadiazole-base d alternating polymer solar cells with different configurations10.1016/j.dyepig.2018.09.032 ↗
27. Potential of nonfullerene small molecules with high photovoltaic performance10.1002/asia.201700692 ↗
28. Synthesis of new substituted tetrazines: electrochemical and spectroscopic properties10.1039/B310737J ↗
29. Development of a new s-tetrazine-based copolymer for efficient solar cells10.1021/ja106052e ↗
30. Donor–acceptor copolymers incorporating polybenzo[1,2-b:4,5-b′]dithiophene and tetrazine for high open circuit voltage polymer solar cells10.1016/j.orgel.2013.05.015 ↗
31. Synthesis of new alternating conjugated copolymers consisting of tetrazine/carbazole or tetrazine/fluorene derivatives along with thiophene spacers for photovoltaic applications10.1016/j.synthmet.2011.10.020 ↗
32. Alternating copolymers of dithienyl-s-tetrazine and cyclopentadithiophene for organic photovoltaic applications10.1021/cm200330c ↗
33. Bisfuran-s-tetrazine-based conjugated polymers: Synthesis, characterization, and photovoltaic properties10.1002/macp.201100358 ↗
34. The preparation of 3,6-bis(3-hexylthien-2-yl)-s-tetrazine and its conjugated polymers10.1002/pola.24774 ↗
35. Synthesis, characterization and photovoltaic applications of a low band gap polymer based on s-tetrazine and dithienosilole10.1039/c0cc02766a ↗
36. Improved open-circuit voltage of benzodithiophene based polymer solar cells using bulky terthiophene side group10.1016/j.solmat.2015.02.022 ↗
37. Solution-processable tetrazine and oligothiophene based linear a–d–a small molecules: Synthesis, hierarchical structure and photovoltaic properties10.1016/j.orgel.2013.02.038 ↗
38. Small molecules based on tetrazine unit for efficient performance solution-processed organic solar cells10.1016/j.solmat.2016.05.003 ↗
39. Enhanced photovoltaic performance of tetrazine-based small molecules with conjugated side chains10.1021/acssuschemeng.7b01420 ↗
40. Controlling morphology of active layer by tuning coplanarity of the centrality in acceptor-donor-acceptor small molecules for photovoltaic application10.1002/cjoc.201300512 ↗
41. Synthesis and photovoltaic properties of d-a copolymers based on alkyl-substituted indacenodithiophene donor unit10.1021/cm2019586 ↗
42. Quantitatively analyzing the influence of side chains on photovoltaic properties of polymer-fullerene solar cells10.1021/jp106640r ↗
43. Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials10.1007/s11426-014-5260-2 ↗
44. Importance of the donor:Fullerene intermolecular arrangement for high-efficiency organic photovoltaics10.1021/ja502985g ↗
45. Regioregular polymers containing benzodithiophene and thienothiophene segments with different electron donating side chains for high-performance polymer solar cells10.1016/j.dyepig.2018.05.047 ↗
46. Terthiophene-based D-A polymer with an asymmetric arrangement of alkyl chains that enables efficient polymer solar cells10.1021/jacs.5b08556 ↗
47. Alkyl chain orientations in dicyanomethylene-substituted 2,5-di(thiophen-2-yl)thieno-[3,2-b]thienoquinoid: impact on solid-state and thin-film transistor performance10.1002/adfm.201202744 ↗
48. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
49. 1,4-di(3-alkoxy-2-thienyl)-2,5-difluorophenylene: a building block enabling high-performance polymer semiconductors with increased open-circuit voltages10.1021/acs.macromol.8b00975 ↗
50. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
51. Thermally stable, effisient polymer solar gells with nanossale gontrol of the interpenetrating network morphology10.1002/adfm.200500211 ↗
52. Solar cells: significance of average domain purity and mixed domains on the photovoltaic performance of high-efficiency solution-processed small-molecule BHJ solar cells10.1002/aenm.201500877 ↗
53. Determining the role of polymer molecular weight for high-performance all-polymer solar cells: its effect on polymer aggregation and phase separation10.1021/ja5123182 ↗
54. A benzo[1,2-b:4,5-b′]dithiophene-based copolymer with deep homo level for efficient polymer solar cells10.1016/j.solmat.2012.01.025 ↗
55. Achieving efficient thick active layer and large area ternary polymer solar cells by incorporating a new fused heptacyclic non-fullerene acceptor10.1039/C8TA06836D ↗
56. Fused hexacyclic nonfullerene acceptor with strong near-infrared absorption for semitransparent organic solar cells with 9.77% efficiency10.1002/adma.201701308 ↗