In situ alloying Ti–Ag antibacterial biomaterials via laser powder bed fusion: Microstructure, mechanical properties and bioperformance
Source abstract
Abstract
Antibacterial properties are critical for implants, while general pure titanium implants are bioinert. Adding nano Ag to metals is an effective strategy to obtain antibacterial properties. However, the comprehensive properties of Ti–Ag alloy prepared by traditional methods are not satisfactory. In this paper, Ti–5Ag alloy with an antibacterial rate close to 100 % was synthesized in situ by laser powder bed fusion (LPBF), and its microstructure and properties were studied systematically. Phase analysis demonstrated the existence of Ti2Ag which played an important role in gaining excellent antibacterial properties. Benefiting from in situ laser alloying, the elements were homogeneously distributed, which endowed the Ti–5Ag alloy with excellent mechanical properties and corrosion resistance. The tensile strength and elongation reached 716 MPa and 33.51 %, respectively. Furthermore, through the design of triply periodic minimal surface (TPMS) structures, mechanical properties matching human bone were obtained. Based on LPBF-printed Ti–5Ag alloy and TPMS structures, this paper provides a feasible method for the manufacturing of bone implants with excellent comprehensive properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Electrochemically nano-engineered titanium: influence of dual micro-nanotopography of anisotropic nanopores on bioactivity and antimicrobial activity
2. Antibacterial titanium surfaces for medical implants10.1016/j.msec.2015.12.062 ↗
3. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
4. Study of Ag precipitation and mechanical properties of Ti-Ta-Ag ternary alloy10.1039/D0RA09356D ↗
5. Sequential activation of M1 and M2 phenotypes in macrophages by Mg degradation from Ti-Mg alloy for enhanced osteogenesis10.1186/s40824-022-00262-w ↗
6. Osteoimmunomodulatory properties of a magnesium-doped phase-transited lysozyme coating on titanium
7. Antibacterial metals and alloys for potential biomedical implants
8. Strontium (Sr) and silver (Ag) loaded nanotubular structures with combined osteoinductive and antimicrobial activities10.1016/j.actbio.2015.11.046 ↗
9. Antibacterial coatings on titanium implants10.1002/jbm.b.31463 ↗
10. Surface modification of medical metals by ion implantation of silver and copper10.1016/j.vacuum.2006.12.011 ↗
11. An electron microscopical study on the growth of TiO2-Ag antibacterial coatings on Ti6Al7Nb biomedical alloy10.1016/j.actbio.2011.02.037 ↗
12. Photocatalytic inactivation of bacteria in water using suspended and immobilized silver-TiO210.1016/j.apcatb.2009.09.019 ↗
13. Antibacterial activities and biocompatibilities of Ti-Ag alloys prepared by spark plasma sintering and acid etching10.1016/j.msec.2018.06.024 ↗
14. Inhibitory effect of Ti-Ag alloy on artificial biofilm formation10.4012/dmj.2013-334 ↗
15. Introduction of antibacterial function into biomedical TiNi shape memory alloy by the addition of element Ag10.1016/j.actbio.2011.02.010 ↗
16. Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti-Ag sintered alloys10.1016/j.msec.2016.01.081 ↗
17. Mechanical properties and microstructures of dental cast Ti-Ag and Ti-Cu alloys10.4012/dmj.21.270 ↗
18. Laser surface alloying of titanium alloy with silver: microstructure, hardness and corrosion property10.1016/j.surfcoat.2023.129357 ↗
19. Strong and ductile titanium-oxygen-iron alloys by additive manufacturing10.1038/s41586-023-05952-6 ↗
20. In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere10.1016/j.compositesb.2023.110534 ↗
21. Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects
22. Strengthening and fracture mechanisms of a precipitation hardening high-entropy alloy fabricated by selective laser melting10.1080/17452759.2022.2037055 ↗
23. Additive manufacturing of metals: microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
24. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
25. Biomimetic fabrication of a three-level hierarchical calcium phosphate/collagen/hydroxyapatite scaffold for bone tissue engineering10.1088/1758-5082/6/3/035013 ↗
26. Interplay between cellular activity and three-dimensional scaffold-cell constructs with different foam structure processed by electron beam melting10.1002/jbm.a.35307 ↗
27. GB 4789.2-2010 National Food Safety Standard Food Microbiological Examination Aerobic Plate Count.
28. Effects of combined chemical design (Cu addition) and topographical modification (SLA) of Ti-Cu/SLA for promoting osteogenic, angiogenic and antibacterial activities10.1016/j.jmst.2019.10.045 ↗
29. Dependence of intertrabecular permeability on flow direction and anatomic site10.1114/1.195 ↗
30. Corrosion behavior of Ti-Ag alloys used in dentistry in lactic acid solution10.1007/s12540-011-0224-y ↗
31. Effect of nano/micro-Ag compound particles on the bio-corrosion, antibacterial properties and cell biocompatibility of Ti-Ag alloys10.1016/j.msec.2017.02.142 ↗
32. What controls the antibacterial activity of Ti-Ag alloy, Ag ion or Ti(2)Ag particles?10.1016/j.msec.2019.110548 ↗
33. Factors controlling segregation tendency of solute Ti, Ag and Ta into different symmetrical tilt grain boundaries of tungsten: first-principles and experimental study10.1016/j.actamat.2021.116868 ↗
34. Deformation-free geometric recrystallisation in a metastable β-Ti alloy produced by selective laser melting10.1080/21663831.2020.1713244 ↗
35. Strong and ductile titanium via additive manufacturing under a reactive atmosphere
36. Surface characterization and cell response of binary Ti-Ag alloys with CP Ti as material control10.1016/S1005-0302(12)60130-3 ↗
37. Additive manufacturing of anti-bacterial and low-cost Ti–Mo(–Ag) alloys using elemental powders through in situ laser alloying10.1007/s10853-022-08107-6 ↗
38. Corrosion resistance for biomaterial applications of TiO2 films deposited on titanium and stainless steel by ion-beam-assisted sputtering10.1002/(SICI)1097-4636(19970605)35:3<309::AID-JBM5>3.0.CO;2-L ↗
39. Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys10.1016/j.corsci.2014.02.017 ↗
40. Direct comparison of additively manufactured porous titanium and tantalum implants towards in vivo osseointegration
41. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of wrought Ti-3Cu alloy by heat treatment
42. Novel Zn-based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
43. In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn–Mg alloy10.1002/jbm.b.33341 ↗
44. The influence of elementary silver versus titanium on osteoblasts behaviour in vitro using human osteosarcoma cell lines10.1155/2007/26539 ↗
45. Recent advances on high-entropy alloys for 3D printing10.1002/adma.201903855 ↗
46. Corrosion resistance of titanium-silver alloys in an artificial saliva containing fluoride ions10.1002/jbm.b.30206 ↗
47. Microstructure and mechanical properties of Ti–Ag–N and Ti–Cr–N superhard nanostructured coatings10.1016/S0257-8972(03)00565-6 ↗
48. Mechanical properties of dental Ti-Ag alloys with 223, 25, 273, and 30 mass% Ag10.4012/dmj.2015-075 ↗
49. Ti-Ag-Pd alloy with good mechanical properties and high potential for biological applications10.1038/srep25142 ↗
50. Enhanced mechanical, bio-corrosion, and antibacterial properties of Ti-Cu alloy by forming a gradient nanostructured surface layer10.1016/j.surfcoat.2023.129609 ↗
51. Low-cost powder metallurgy Ti-Cu alloys as a potential antibacterial material10.1016/j.jmbbm.2019.04.004 ↗
52. Corrosion behavior of advanced titanium-based alloys made by three-dimensional printing (3DP (TM)) for biomedical applications10.1016/S0010-938X(00)00181-5 ↗
53. Corrosion behavior of Ti-5Ag alloy with and without thermal oxidation in artificial saliva solution10.1016/j.dental.2010.10.005 ↗
54. Micro-engineered architected metamaterials for cell and tissue engineering