Nonfullerene acceptor with strong near-infrared absorption for polymer solar cells
Source abstract
Abstract
Abstract A fused-ring electron acceptor based on indacenodithiophene was designed and synthesized. The nonfullerene acceptor shows strong absorption in 500–850 nm with extinction coefficient up to 1.4 × 10 5 M −1 cm −1 and relatively high lowest unoccupied molecular orbital energy level (−3.55 eV). As an electron-cascade acceptor and strong absorption material, the new acceptor was incorporated into poly(3-hexylthiophene): [6,6]-phenyl-C 61 -butyric-acidmethyl-ester blend to fabricate ternary blend polymer solar cells. The introduction of the nonfullerene acceptor can not only broaden the light absorption of the active layer to the near-infrared region, but also increase the open circuit voltage due to the higher lowest unoccupied molecular orbital of the nonfullerene acceptor relative to the fullerene acceptor. Ternary blend devices with 20% of the nonfullerene acceptor exhibited an average power conversion efficiency of 3.84%, higher than those of the binary blends using the fullerene acceptor (3.30%) or the nonfullerene acceptor (1.42%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Fullerene Chemistry and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
3. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
4. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
5. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
6. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
7. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
8. A polybenzo[1,2-b:4,5-b′]dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells10.1002/anie.200906934 ↗
9. Synthesis of fluorinated polythienothiophene-co-benzodithiophenes and effect of fluorination on the photovoltaic properties10.1021/ja108601g ↗
10. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
11. Fluorine substituents reduce charge recombination and drive structure and morphology development in polymer solar cells10.1021/ja309289u ↗
12. Low band-gap conjugated polymers with strong interchain aggregation and very high hole mobility towards highly efficient thick-film polymer solar cells10.1002/adma.201305092 ↗
13. Small-bandgap semiconducting polymers with high near-infrared photoresponse10.1021/ja506265h ↗
14. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
15. P3HT: PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
16. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
17. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
18. Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor10.1039/c3ee44202k ↗
19. Ternary blend polymer solar cells with enhanced power conversion efficiency10.1038/nphoton.2014.172 ↗
20. Synergistic effect of polymer and small molecules for high-performance ternary organic solar cells10.1002/adma.201404902 ↗
21. Alloy acceptor: superior alternative to PCBM toward efficient and stable organic solar cells10.1002/adma.201602067 ↗
22. Ternary organic solar cells based on two highly efficient polymer donors with enhanced power conversion efficiency10.1002/aenm.201502109 ↗
23. Molecular lock: a versatile key to enhance efficiency and stability of organic solar cells10.1002/adma.201600426 ↗
24. Versatile third components for efficient and stable organic solar cells10.1039/C5MH00090D ↗
25. Performance enhancement of the P3HT/PCBM solar cells through NIR sensitization using a small-bandgap polymer10.1002/aenm.201200219 ↗
26. Polymer bulk heterojunction solar cells employing forster resonance energy transfer10.1038/nphoton.2013.82 ↗
27. Two similar near-infrared (IR) absorbing benzannulated aza-bodipy dyes as near-IR sensitizers for ternary solar cells10.1021/am400923b ↗
28. Rational design of ternary-phase polymer solar cells by controlling polymer phase separation10.1021/jp4108188 ↗
29. High-performance multiple-donor bulk heterojunction solar cells10.1038/nphoton.2015.9 ↗
30. Efficient ternary blend polymer solar cells with a bipolar diketopyrrolopyrrole small molecule as cascade material10.1016/j.orgel.2015.06.043 ↗
31. Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage10.1021/ja205977z ↗
32. Tunable open-circuit voltage in ternary organic solar cells10.1063/1.4761246 ↗
33. An electron acceptor based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone for fullerene-free organic solar cells10.1039/C4TA06004K ↗
34. Nonfullerene acceptors based on extended fused rings flanked with benzothiadiazolyl-methylenemalononitrile for polymer solar cells10.1039/C5TA05901A ↗
35. Designing efficient non-fullerene acceptors by tailoring extended fused-rings with electron-deficient groups10.1002/aenm.201501063 ↗
36. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
37. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
38. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
39. Efficient fullerene-free organic solar cells based on fused-ring oligomer molecules10.1039/C5TA10424F ↗
40. A twisted dimeric perylene diimide electron acceptor for efficient organic solar cells10.1002/aenm.201400420 ↗
41. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
42. Structure evolution of oligomer fused-ring electron acceptors toward high efficiency of as-cast polymer solar cells10.1002/aenm.201600854 ↗
43. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
44. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
45. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
46. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
47. Monodisperse macromolecules based on benzodithiophene and diketopyrrolopyrrole with strong nir absorption and high mobility10.1039/C5TC03589A ↗