Molecular geometry regulation of bay -phenyl substituted perylenediimide derivatives with bulky alkyl chain for use in organic solar cells as the electron acceptor
Source abstract
Abstract
Abstract Perylenediimide derivatives (PDI) are among the most promising non-fullerene electron acceptor materials for use in organic solar cells. However, owing to the intensive intermolecular interactions, the non-functionalized PDI molecules showed high tendency of aggregation in solid film, which leads to poor device performance. In this paper molecular geometry of PDI derivatives was finely tuned by introducing a bulky isopropyl group on the bay-phenyl unit, and influences of such a bulky alkyl group on the optical and electrochemical properties were systematically studied. Results indicated that the bulky isopropyl group on the para- and meta-position of the bay-phenyl group has negligible influence on the twist angle between the PDI core and the bay-phenyl unit, and these two compounds (4-iPP-PDI and 3-iPP-PDI) have similar molecular properties. However, large steric hindrance of the ortho-isopropyl group causes a large twist between the PDI core and the bay-phenyl unit, which leads to conjugation break, and consequently to a blue-shifted absorption spectrum and an increased optical band gap for the final PDI compound (2-iPP-PDI). Polymer solar cells using these bay-phenyl functionalized PDIs as the electron acceptor were fabricated and tested. And the meta-substituted PDI compound 3-iPP-PDI show the better device performance than the para- and ortho-substituted compounds (4-iPP-PDI and 2-iPP-PDI), which was ascribed to the proper nano-scale phase separation and high electron mobility of the blended film. The current results proved that molecular geometry of PDI derivatives can be finely regulated through introducing bulky alkyl side chain on the bay-substitution group to achieve a balanced property of crystallinity and electron mobility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. A brief history of the development of organic and polymeric photovoltaics10.1016/j.solmat.2004.02.021 ↗
2. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
3. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
4. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
5. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
6. Terthiophene-based D-A polymer with an asymmetric arrangement of alkyl chains that enables efficient polymer solar cells10.1021/jacs.5b08556 ↗
7. Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10%10.1021/ja509703k ↗
8. A series of simple oligomer-like small molecules based on oligothiophenes for solution-processed solar cells with high efficiency10.1021/jacs.5b00305 ↗
9. Breaking the 10% efficiency barrier in organic photovoltaics: morphology and device optimization of well-known PBDTTT polymers10.1002/aenm.201502529 ↗
10. Imide- and amide-functionalized polymer semiconductors10.1021/cr500225d ↗
11. Donor-acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells10.1039/C4CS00250D ↗
12. Material and energy intensity of fullerene production10.1021/es103860a ↗
13. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
14. Development of polymer acceptors for organic photovoltaic cells10.3390/polym6020382 ↗
15. Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells10.1039/C3TA14236A ↗
16. Recent research progress of polymer donor/polymer acceptor blend solar cells10.1039/C5TA10759H ↗
17. Perylene diimides based materials for organic solar cells10.1016/j.dyepig.2013.01.020 ↗
18. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
19. More than conformational “twisting” or “coplanarity”: molecular strategies for designing high-efficiency nonfullerene organic solar cells10.1021/acs.chemmater.5b04339 ↗
20. Beyond fullerenes: designing alternative molecular electron acceptors for solution-processable bulk heterojunction organic photovoltaics10.1021/acs.jpclett.5b01471 ↗
21. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
22. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
23. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
24. An all-small-molecule organic solar cell with high efficiency nonfullerene acceptor10.1002/adma.201405429 ↗
25. Nonfullerene acceptors based on extended fused rings flanked with benzothiadiazolylmethylenemalononitrile for polymer solar cells10.1039/C5TA05901A ↗
26. A rhodanine flanked nonfullerene acceptor for solution-processed organic photovoltaics10.1021/ja5110602 ↗
27. Synthesis and photovoltaic properties of A–D–A type non-fullerene acceptors containing isoindigo terminal units10.1039/C5RA23321F ↗
28. Strain and huckel aromaticity: driving forces for a promising new generation of electron acceptors in organic electronics10.1002/anie.200905117 ↗
29. Nonfullerene polymer solar cells with 8.5% efficiency enabled by a new highly twisted electron acceptor dimer10.1002/adma.201503801 ↗
30. Fine-tuning the 3D structure of nonfullerene electron acceptors toward high-performance polymer solar cells10.1002/adma.201500577 ↗
31. Bis(naphthalene imide)diphenylanthrazolines: a new class of electron acceptors for efficient nonfullerene organic solar cells and applicable to multiple donor polymers10.1002/aenm.201402041 ↗
32. Low-bandgap small molecules as non-fullerene electron acceptors composed of benzothiadiazole and diketopyrrolopyrrole for all organic solar cells10.1021/acs.chemmater.5b02480 ↗
33. Three-dimensional molecular donors combined with polymeric acceptors for high performance fullerene-free organic photovoltaic devices10.1039/C5TA06639E ↗
34. A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage10.1039/C5EE03481G ↗
35. All-polymer solar cells based on absorption-complementary polymer donor and acceptor with high power conversion efficiency of 8.27%10.1002/adma.201504629 ↗
36. 7.7% Efficient all-polymer solar cells10.1002/adma.201501604 ↗
37. A nonfullerene acceptor for wide band gap polymer based organic solar cells10.1039/C5CC08023A ↗
38. Recent advances in rylene diimide polymer acceptors for all-polymer solar cells
39. Phthalimide end-capped thienoisoindigo and diketopyrrolopyrrole as non-fullerene molecular acceptors for organic solar cells10.1039/C5TA09171C ↗
40. Diindeno[1,2-g:1′,2′-s]rubicene: all-carbon non-fullerene electron acceptor for efficient bulk-heterojunction organic solar cells with high open-circuit voltage10.1039/C4RA12505C ↗
41. Solution-processed boron subphthalocyanine derivatives as acceptors for organic bulk-heterojunction solar cells10.1039/C5TA00715A ↗
42. Non-fullerene acceptors containing fluoranthene-fused imides for solution-processed inverted organic solar cells10.1039/c3cc41803k ↗
43. Solution-processed, molecular photovoltaics that exploit hole transfer from non-fullerene, n-type materials10.1002/adma.201305444 ↗
44. New advances in non-fullerene acceptor based organic solar cells10.1039/C5RA17715D ↗
45. Perylene imides for organic photovoltaics: yesterday, today, and tomorrow10.1002/adma.201104447 ↗
46. Electron trapping in dye/polymer blend photovoltaic cells10.1002/1521-4095(200009)12:17<1270::AID-ADMA1270>3.0.CO;2-8 ↗
47. Crystal network formation in organic solar cells10.1016/S0927-0248(99)00096-3 ↗
48. Perylene tetracarboxydiimide as an electron acceptor in organic solar cells: a study of charge generation and recombination10.1021/jp907633g ↗
49. Effect of molecular packing on interfacial recombination of organic solar cells based on palladium phthalocyanine and perylene derivatives10.1063/1.3177349 ↗
50. Charge generation and transport in efficient organic bulk heterojunction solar cells with a perylene acceptor10.1039/C3EE42484G ↗
51. Cooperatively tuning phase size and absorption of near IR photons in P3HT:perylene diimide solar cells by bay-modifications on the acceptor10.1021/jp5093674 ↗
52. Synthesis and characterization of new electron acceptor perylene diimide molecules for photovoltaic applications10.1016/j.dyepig.2013.05.011 ↗
53. Slip-stacked perylenediimides as an alternative strategy for high efficiency nonfullerene acceptors in organic photovoltaics10.1021/ja508814z ↗
54. Electron acceptors based on α-substituted perylene diimide (PDI) for organic solar cells10.1021/acs.chemmater.5b04570 ↗
55. Perylene–diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface donor/acceptor compositions10.1021/cm5006339 ↗
56. Towards rational design of organic electron acceptors for photovoltaics: a study based on perylenediimide derivatives10.1039/c3sc51841h ↗
57. Integrated molecular, interfacial, and device engineering towards high-performance non-fullerene based organic solar cells10.1002/adma.201401992 ↗
58. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
59. A star-shaped perylene diimide electron acceptor for high-performance organic solar cells10.1002/adma.201400525 ↗
60. A 9,9′-spirobi[9H-fluorene]-cored perylenediimide derivative and its application in organic solar cells as a non-fullerene acceptor10.1039/C5CC08484A ↗
61. A nonfullerene small molecule acceptor with 3D interlocking geometry enabling efficient organic solar cells10.1002/adma.201504010 ↗
62. High-performance non-fullerene organic solar cells based on a selenium-containing polymer donor and a twisted perylene bisimide acceptor
63. Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells10.1038/ncomms9242 ↗
64. Rigidifying nonplanar perylene diimides by ring fusion toward geometry-tunable acceptors for high-performance fullerene-free solar cells10.1002/adma.201504120 ↗
65. The effect of perylene diimides chemical structure on the photovoltaic performance of P3HT/perylene diimides solar cells10.1016/j.dyepig.2015.04.006 ↗
66. Perylenebisimide regioisomers: effect of substituent position on their spectroscopic, electrochemical, and photovoltaic properties10.1016/j.dyepig.2015.05.032 ↗
67. Influence of para-alkyl chain length of the bay-phenyl unit on properties and photovoltaic performance of asymmetrical perylenediimide derivatives10.1016/j.dyepig.2015.11.013 ↗
68. Selective bromination of perylene diimides under mild conditions10.1021/jo070367n ↗
69. 2,2-Dicyanovinyl-end-capped oligothiophenes as electron acceptor in solution processed bulk-heterojunction organic solar cells10.1016/j.orgel.2015.04.003 ↗
70. Benzodithiophene bridged dimeric perylene diimide amphiphiles as efficient solution-processed non-fullerene small molecules10.1039/c3py00457k ↗
71. A tetraphenylethylene core-based 3D structure small molecular acceptor enabling efficient non-fullerene organic solar cells10.1002/adma.201404152 ↗
72. Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated polymers for solar cell applications10.1002/adma.201004554 ↗
73. Polythiophene:perylene diimide solar cells - the impact of alkyl-substitution on the photovoltaic performance10.1002/aenm.201000006 ↗
74. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
75. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗