journal article·2015-12

Spirobifluorene-based acceptors for polymer solar cells: Effect of isomers

Jiayu Wang, Shuixing Dai, Yuehan Yao, Pei Cheng, Yuze Lin, Xiaowei Zhan

Dyes and Pigments· Volume 123
Publisher page

Abstract

Two spirobifluorene-based isomeric acceptors (SBF1 and SBF2) with electron-withdrawing 1,1-dicyanomethylene-3-indanone as end groups were theoretically studied, synthesized and applied as electron acceptors for solution-processed polymer solar cells (PSCs). SBF1 possessed three-dimensional molecular structure while SBF2 was more planar. The effect of molecular configuration on absorption, energy level, charge transport, morphology and PSC performance was investigated. These molecules exhibited good thermal stability with decomposition temperatures of 345-348 degrees C, broad absorption in visible region (400-650 nm), and proper HOMO (-5.96 to -5.94 eV) and LUMO (-3.86 to -3.78 eV) energy levels. The mobility of SBF2 (7.2 x 10(-4) cm(2) V-1 s(-1)) was one order of magnitude higher than that of SBF1 (6.1 x 10(-5) cm(2) V-1 s(-1)). When blending with low-bandgap polymer donor PBDITT-C-T, the power conversion efficiencies of SBF2-based PSCs were ca. 50% higher than those of SBF1-based devices. (C) 2015 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Polymer photovoltaic cells – enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
3. Conjugated polymers for high-efficiency organic photovoltaics10.1039/b9py00325h ↗
4. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
5. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
6. Thiazole-based organic semiconductors for organic electronics10.1002/adma.201200721 ↗
7. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
8. Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
9. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
10. A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%10.1039/C4EE03048F ↗
11. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
12. Simplified tandem polymer solar cells with an ideal self-organized recombination layer10.1002/adma.201404765 ↗
13. Highly efficient tandem polymer solar cells with a photovoltaic response in the visible light range10.1002/adma.201404525 ↗
14. Enhanced efficiency of polymer solar cells by adding a high-mobility conjugated polymer10.1039/C5EE00090D ↗
15. Polymer homo-tandem solar cells with best efficiency of 11.3%10.1002/adma.201404220 ↗
16. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
17. N-type organic semiconductors in organic electronics10.1002/adma.200903628 ↗
18. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
19. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
20. Polymer donor–polymer acceptor (all-polymer) solar cells10.1016/j.mattod.2013.04.005 ↗
21. Quinoxaline-functionalized c60 derivatives as electron acceptors in organic solar cells10.1039/C4RA02911A ↗
22. A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells10.1021/ja071760d ↗
23. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
24. All-polymer solar cells from perylene diimide based copolymers: material design and phase separation control10.1002/anie.201005408 ↗
25. Rylene and related diimides for organic electronics10.1002/adma.201001402 ↗
26. Synthesis, characterization, and physical properties of a conjugated heteroacene: 2-methyl-1,4,6,7,8,9-hexaphenylbenz(g)isoquinolin-3(2h)-one (biq)10.1002/asia.201000659 ↗
27. A non-fullerene small molecule as efficient electron acceptor in organic bulk heterojunction solar cells10.1002/adma.201103927 ↗
28. Toward rational design of organic electron acceptor for photovoltaics: a study based on perylenediimide derivatives10.1039/c3sc51841h ↗
29. New polymer acceptors for organic solar cells: the effect of regio-regularity and device configuration10.1039/c3ta10864c ↗
30. Tetraazabenzodifluoranthene diimides: building blocks for solution-processable n-type organic semiconductors10.1002/anie.201210085 ↗
31. Control of miscibility and aggregation via the material design and coating process for high-performance polymer blend solar cells10.1002/adma.201303170 ↗
32. A solution-processable electron acceptor based on dibenzosilole and diketopyrrolopyrrole for organic solar cells10.1002/aenm.201200911 ↗
33. Morphology-performance relationships in high-efficiency all-polymer solar cells10.1002/aenm.201300785 ↗
34. Self-assembling decacyclene triimides prepared through a regioselective hextuple friedel–crafts carbamylation10.1002/anie.201207608 ↗
35. Binary additives synergistically boost the efficiency of all-polymer solar cells up to 3.45%10.1039/C3EE43041C ↗
36. Oligothiophene-bridged perylene diimide dimers for fullerene-free polymer solar cells: effect of bridge length10.1039/C5TA02589C ↗
37. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
38. Non-fullerene organic solar cells with 6.1% efficiency through fine-tuning parameters of the film-forming process10.1021/cm504140c ↗
39. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
40. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
41. High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadizole-based donor polymer combined with a properly matched small molecule acceptor10.1039/C4EE02990A ↗
42. N-type semiconducting naphthalene diimide-perylene diimide copolymers: controlling crystallinity, blend morphology, and compatibility toward high-performance all-polymer solar cells10.1021/ja513260w ↗
43. All-polymer bulk heterojuction solar cells with 4.8% efficiency achieved by solution processing from a co-solvent10.1002/adma.201401490 ↗
44. High performance all-polymer solar cell via polymer side-chain engineering10.1002/adma.201306242 ↗
45. Highly efficient charge-carrier generation and collection in polymer/polymer blend solar cells with a power-conversion efficiency of 5.7%10.1039/C4EE01326C ↗
46. High-efficiency all-polymer solar cells based on a pair of crystalline low-bandgap polymers10.1002/adma.201402473 ↗
47. A 3d star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18 V10.1039/c2cc31511d ↗
48. Perylene-diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface d/a compositions10.1021/cm5006339 ↗
49. Integrated molecular, interfacial, and device engineering towards high-performance non-fullerene based organic solar cells10.1002/adma.201401992 ↗
50. A star-shaped perylene diimide electron acceptor for high-performance organic solar cells10.1002/adma.201400525 ↗
51. A twisted dimeric perylene diimide electron acceptor for efficient organic solar cells10.1002/aenm.201400420 ↗
52. Beyond fullerenes: design of nonfullerene acceptors for efficient organic photovoltaics10.1021/ja508472j ↗
53. A perylene diimide (pdi)-based small molecule with tetrahedral configuration as a non-fullerene acceptor for organic solar cells10.1039/C5TC00865D ↗
54. Effect of molecular packing on the exciton diffusion length in organic solar cells10.1063/1.2783202 ↗
55. Bulk electron transport and charge injection in a high mobility n-type semiconducting polymer10.1002/adma.201000232 ↗
56. Unconventional face-on texture and exceptional in-plane order of a high mobility n-type polymer10.1002/adma.201001202 ↗
57. Polymer blend solar cells based on a high-mobility naphthalenediimide-based polymer acceptor: device physics, photophysics and morphology10.1002/aenm.201000035 ↗
58. Molecular bulk heterojunctions: an emerging approach to organic solar cells10.1021/ar900041b ↗
59. Intermolecular interactions of perylene diimides in photovoltaic blends of fluorene copolymers: disorder effects on photophysical properties, film morphology and device efficiency10.1002/adfm.200800356 ↗
60. Spiro compounds for organic optoelectronics10.1021/cr0501341 ↗
61. An electron acceptor based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone for fullerene-free organic solar cells10.1039/C4TA06004K ↗
62. Frisch · 2009
63. Development of the Colle–Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
64. Density-functional thermochemistry. III. The role of exact exchange
65. Self-consistent molecular orbital methods. XX. A basis set for correlated wave functions
66. Electrical characteristics and efficiency of single-layer organic light-emitting diodes10.1103/PhysRevB.58.R13411 ↗
67. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
68. A low-bandgap semiconducting polymer for photovoltaic devices and infrared emitting diodes10.1002/1616-3028(20021016)12:10<709::AID-ADFM709>3.0.CO;2-N ↗
69. Design rules for donors in bulk-heterojunction solar cells—towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
70. Role of photoactive layer morphology in high fill factor all-polymer bulk heterojunction solar cells10.1039/c0jm03405c ↗