journal article·2022-06Open access

Role of stacking faults and hydroxyl groups on the lithium adsorption/desorption properties of layered H2TiO3

R. Marthi, P. Yang, E.Y. Owusu-Fordjour, Y.R. Smith

Abstract

Layered H2TiO3 ion sieve materials have shown promising selective lithium adsorption properties from brine solutions. Chemical delithiation of Li2TiO3 results in an increase of stacking faults and formation of isolated and hydrogen bonded OH groups. There is a critical knowledge gap in understanding the role of these stacking faults in lithium adsorption/desorption kinetics. Moreover, there is a lack of understanding in manipulation of surface hydroxyl groups to improve the lithium adsorption properties. In this work, layered Li2TiO3 (LTO) was synthesized using two different techniques, i.e., solid-state (ss-LTO) and hydrothermal (HT-LTO) methods to introduce varying concentrations of stacking faults. It was observed that HT-LTO synthesis method has a higher concentration of stacking faults, which results in slower elution of lithium from the precursor compared to ss-LTO. Interestingly, after complete lithium elution, both ss-H2TiO3 and HT-H2TiO3 ion sieves showed similar lithium adsorption properties. We also show that the lithium adsorption properties of layered H2TiO3 can be increased by oxygen annealing of the Li2TiO3 ion sieve precursor. Oxygen annealing improved the maximum lithium adsorption capacity by over 7% in a buffered solution (pH = 9.50) due to the increase in the relative amount of lattice oxygen and isolated surface hydroxyl groups. Spectroscopic studies (XPS, FTIR, and Raman) were used to further investigate and corroborate role of stacking faults and surface hydroxyl groups in the lithium adsorption/desorption process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Extraction and Separation Processes · Advancements in Battery Materials · Chemical Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Assessment of world lithium resources and consequences of their geographic distribution on the expected development of the electric vehicle industry10.1016/j.rser.2011.11.023 ↗
2. Understanding the future of lithium Part 2 , temporally and spatially resolved life-cycle assessment modeling
3. Adsorptive Li+ mining from liquid resources by H2TiO3: equilibrium, kinetics, thermodynamics, and mechanisms10.1016/j.jiec.2016.01.015 ↗
4. Synthesis of Li+ adsorbent (H2TiO3) and its adsorption properties10.1016/S1003-6326(13)62453-X ↗
5. Capturing lithium from wastewater using a fixed bed packed with 3-D MnO 2 ion cages10.1021/acs.est.6b02247 ↗
6. Extraction of lithium with functionalized lithium ion-sieves10.1016/j.pmatsci.2016.09.004 ↗
7. Novel approaches for lithium extraction from salt-lake brines: a review10.1016/j.hydromet.2019.05.005 ↗
8. Metal oxide sorbents for the sustainable recovery of lithium from unconventional resources10.1016/j.apmt.2020.100638 ↗
9. Manganese oxide porous crystal10.1039/a805369c ↗
10. Marcus · 1991 · 87 · 2995
11. Selective recovery of lithium from the Great Salt Lake using lithium manganese oxide-diatomaceous earth composite10.1016/j.hydromet.2019.03.011 ↗
12. Lithium extraction process on spinel-type LiMn2O4and characterization based on the hydrolysis of sodium persulfate10.1016/j.ssi.2017.01.018 ↗
13. Recovery of lithium from Urmia Lake by a nanostructure MnO2ion sieve10.1016/j.hydromet.2014.08.004 ↗
14. Hydrothermal synthesis of lithium-enriched β-Li2TiO3 with an ion-sieve application: excellent lithium adsorption10.1039/C6RA18018C ↗
15. Defect crystal structure of new TiO(OH)2 hydroxide and related lithium salt Li2TiO310.1039/c0dt00354a ↗
16. The structure of H2TiO3 - a short discussion on “lithium recovery from salt lake brine by H2TiO310.1039/C4DT03689A ↗
17. On the structure and lithium adsorption mechanism of layered H2TiO310.1021/acsami.0c20691 ↗
18. Metatitanic acid: synthesis and properties10.1134/S0036023606050019 ↗
19. Application and limitations of a H2TiO3 – diatomaceous earth composite synthesized from titania slag as a selective lithium adsorbent10.1016/j.seppur.2020.117580 ↗
20. Structure of Li2MnO3 with different degrees of defects10.1016/j.ssi.2009.10.020 ↗
21. Mistakes and inconsistencies regarding adsorption of contaminants from aqueous solutions: a critical review10.1016/j.watres.2017.04.014 ↗
22. Union · 1985 · vol. 57 · 603
23. About the theory of so-called adsorption of soluble substances
24. Pseudo-second order model for sorption processes10.1016/S0032-9592(98)00112-5 ↗
25. Removal of heavy metals from waters by means of natural zeolites10.1016/0043-1354(84)90124-6 ↗
26. The adsorption of gases on plane surfaces of glass, mica and platinum10.1021/ja02242a004 ↗
27. Over the adsorption in solution
28. Hydrothermal synthesis of lithium-enriched β-Li 2 TiO 3 with an ion-sieve application: excellent lithium adsorption10.1039/C6RA18018C ↗
29. The effects of irradiation and high temperature on chemical states in Li2TiO310.1016/j.ijhydene.2019.10.121 ↗
30. A process for fabrication of Li2TiO3 ceramic pebbles with high mechanical properties via non-hydrolytic sol-gel method10.1016/j.ceramint.2020.07.266 ↗
31. Vacancy and substitution defects of β-Li2TiO3 prepared by hydrothermal method10.1246/cl.130951 ↗
32. High energy heavy ion induced structural disorder in Li2TiO310.1016/j.jnucmat.2007.04.003 ↗
33. Analysis of structural and thermal properties of Li2TiO 3 ceramic powders10.1016/j.ceramint.2010.12.007 ↗
34. Hydrometallurgy High adsorption performance of the Mo-doped titanium oxide sieve for lithium ions10.1016/j.hydromet.2019.05.004 ↗
35. Lithium adsorption from brine by iron-doped titanium lithium ion sieves