journal article·2019-07

Aggregation-induced emission and reversible mechanofluorochromic characteristics of tetra-substituted tetrahydropyrimidine derivatives

Yingyu Lai, Junlong Huang, Shengen Wu, Qiuhua Zhu, Yanshan Liu

Dyes and Pigments· Volume 166
Publisher page

Abstract

Abstract Organic compounds possessing aggregation-induced emission (AIE) and mechanofluorochromic characteristics are promising in chemo/biosensors and data storage. Here, seven tetra-substituted tetrahydropyrimidine derivatives (TTHPs), products of efficient four-component reactions (4CR), were designed and synthesized for investigation into the AIE and mechanofluorochromic characteristics of TTHPs. It is found that TTHPs show strong AIE: no emission in solutions, but highly emission upon aggregation, with fluorescence quantum yields (ΦF) in solid state up to 80%. TTHPs also show distinct reversible mechanofluorochromic characteristics: upon grinding, TTHPs display a red shift in maximum emission wavelength (λem) up to 46 nm, accompanied by the decrease of ΦF; while upon fuming or heating, the ground powders revert to their initial state. The fluorescence of ground TTHPs 4–6 can recover to their original states spontaneously at room temperature in 1–24 h. The X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) measurements demonstrate that the crystalline TTHPs change into amorphous state by grinding, and revert to initial crystalline state upon fuming or heating. This proves that the mechanofluorochromic characteristics of these TTHPs originates from the reversible transformation between thermodynamically metastable ground powder and thermodynamically stable crystal. This work presents a new and easily synthesized series of materials with interesting AIE and mechanofluorochromic characteristics, which may have great potential in sensing, data storage and self-repair materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence and Fluorescent Materials · Molecular Sensors and Ion Detection · Polydiacetylene-based materials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Functionality and versatility of aggregation-induced emission luminogens10.1063/1.4984020 ↗
2. AIE luminogens: emission brightened by aggregation10.1016/j.mattod.2015.03.004 ↗
3. Three polymorphs of one luminogen: how the molecular packing affects the RTP and AIE properties?10.1039/C7TC03656F ↗
4. Achieving highly efficient blue light-emitting polymers by incorporating a styrylarylene amine unit10.1039/C8TC04411B ↗
5. Marching toward highly efficient, pure-blue, and stable thermally activated delayed fluorescent organic light-emitting diodes10.1002/adfm.201802558 ↗
6. White polymer light-emitting devices for solid-state lighting: materials, devices, and recent progress10.1002/adma.201304784 ↗
7. Aggregation-induced emission: phenomenon, mechanism and applications10.1039/b904665h ↗
8. Aggregation-induced emission: the whole is more brilliant than the parts10.1002/adma.201401356 ↗
9. Aggregation-induced emission10.1039/c1cs15113d ↗
10. Aggregation-induced emission of 1-methyl-1,2,3,4,5-pentaphenylsilole10.1039/b105159h ↗
11. Aggregation-induced emission-active near-infrared fluorescent organic nanoparticles for noninvasive long-term monitoring of tumor growth10.1021/acsami.8b03861 ↗
12. AIEgens for biological process monitoring and disease theranostics10.1016/j.biomaterials.2017.09.004 ↗
13. Aggregation-induced emission: a trailblazing journey to the field of biomedicine
14. AIE macromolecules: syntheses, structures and functionalities10.1039/C4CS00044G ↗
15. Fluorescent sensors based on aggregation-induced emission: recent advances and perspectives10.1021/acssensors.7b00551 ↗
16. Recent progress in the mechanofluorochromism of cyanoethylene derivatives with aggregation-induced emission10.1039/C8TC01648H ↗
17. Effective structural modification of traditional fluorophores to obtain organic mechanofluorochromic molecules10.1039/C8TC00043C ↗
18. Mechanoresponsive luminescent molecular assemblies: an emerging class of materials10.1002/adma.201502589 ↗
19. Indene-1,3-dionemethylene-4H-pyran derivatives containing alkoxy chains of various lengths: aggregation-induced emission enhancement, mechanofluorochromic properties and solvent-induced emission changes10.1039/C5TC02932E ↗
20. A mechanochromic luminescent dye exhibiting on/off switching by crystalline–amorphous transitions10.1002/asia.201500499 ↗
21. Synergy between twisted conformation and effective intermolecular interactions: strategy for efficient mechanochromic luminogens with high contrast10.1002/adma.201205043 ↗
22. Polymorphism and reversible mechanochromic luminescence for solid-state difluoroboron avobenzone10.1021/ja9097719 ↗
23. Multistimuli two-color luminescence switching via different slip-stacking of highly fluorescent molecular sheets10.1021/ja1044665 ↗
24. Reproducible on-off switching of solid-state luminescence by controlling molecular packing through heat-mode interconversion10.1038/nmat1454 ↗
25. Recent progress in the mechanochromism of phosphorescent organic molecules and metal complexes10.1039/C6TC01503D ↗
26. Recent advances in organic mechanofluorochromic materials10.1039/c2cs35016e ↗
27. Mechanically induced luminescence changes in molecular assemblies10.1038/nchem.411 ↗
28. Piezofluorochromism of an aggregation-induced emission compound derived from tetraphenylethylene10.1002/asia.201000802 ↗
29. Piezofluorochromic and aggregation-induced-emission compounds containing triphenylethylene and tetraphenylethylene moieties10.1002/asia.201100211 ↗
30. Polymorphism-dependent and switchable emission of butterfly-like bis(diarylmethylene)dihydroanthracenes10.1021/acs.chemmater.5b02280 ↗
31. Tetraphenylpyrazine-based AIEgens: facile preparation and tunable light emission10.1039/C4SC03365E ↗
32. Reversible mechanochromism and enhanced AIE in tetraphenylethene substituted phenanthroimidazoles10.1039/C4CC02824D ↗
33. Mechanochromic behavior of aryl-substituted buta-1,3-diene derivatives with aggregation enhanced emission10.1002/chem.201403132 ↗
34. Crystal structures and emission properties of the BF2 complex 1-phenyl-3-(3,5-dimethoxyphenyl)-propane-1,3-dione: multiple chromisms, aggregation- or crystallization-induced emission, and the self-assembly effect10.1021/ja501977a ↗
35. Synthetic, BioOrganic Chemistry G. Multicomponent reactions in drug discovery and medicinal chemistry10.1016/j.ddtec.2018.11.002 ↗
36. Multicomponent reactions: advanced tools for sustainable organic synthesis10.1039/C4GC00013G ↗
37. Recent developments in asymmetric multicomponent reactions10.1039/c2cs15361k ↗
38. Multicomponent Reactions of pyridines to give ring-fused pyridiniums: in situ activation strategy using 1,2-dichloroethane as a vinyl equivalent10.1002/anie.201812167 ↗
39. Synthesis of fused pyrrolo[3,4-d]tetrahydropyrimidine derivatives by proline-catalyzed multicomponent reaction10.1016/j.tet.2014.04.075 ↗
40. A new series of C-6 unsubstituted tetrahydropyrimidines: convenient one-pot chemoselective synthesis, aggregation-induced and size-independent emission characteristics10.1002/chem.201203012 ↗
41. A novel class of small-molecule caspase-3 inhibitors prepared by multicomponent reactions10.1016/j.ejmech.2012.05.001 ↗
42. Concise and versatile multicomponent synthesis of multisubstituted polyfunctional dihydropyrroles10.1021/cc900046f ↗
43. Practical synthesis and mechanistic study of polysubstituted tetrahydropyrimidines with use of domino multicomponent reactions10.1016/j.tet.2009.03.071 ↗
44. Insight into the strong aggregation-induced emission of low-conjugated racemic C6-unsubstituted tetrahydropyrimidines through crystal-structure-property relationship of polymorphs10.1039/C5SC01226K ↗
45. Insight into structural influences on the optical properties and heteroenantiomeric self-assembly of racemic C6-unsubstituted tetrahydropyrimidines with strong aggregation-induced emission10.1016/j.dyepig.2018.10.028 ↗
46. Racemates have much higher solid-state fluorescence efficiency than their levo- and dextrorotary enantiomers10.1021/acs.jpcc.7b09170 ↗
47. A sensitive and visible fluorescence-turn-on probe for the CMC determination of ionic surfactants10.1039/C3CC45244A ↗
48. A series of sensitive and visible fluorescence-turn-on probes for CMC of ionic surfactants: design, synthesis, structure influence on CMC and sensitivity, and fast detection via a plate reader and a UV light10.1016/j.snb.2015.04.126 ↗
49. Reversible thermo-stimulus solid-state fluorescence-colour/on-off switching and uses as sensitive fluorescent thermometers in different temperature ranges10.1039/C6TC01887D ↗
50. Sensitive mechanofluorochromism based on conversion of paired and unpaired enantiomer packing modes10.1016/j.dyepig.2017.06.001 ↗
51. Efficient synthesis of tetrahydropyrimidines and pyrrolidines by a multicomponent reaction of dialkyl acetylenedicarboxylates (=Dialkyl But-2-ynedioates), amines, and formaldehyde in the presence of iodine as a catalyst10.1002/hlca.201100185 ↗
52. Reaction of dialkyl 2-butynoate with aniline and formaldehyde: revision of the structure of the product10.1016/j.tet.2010.03.084 ↗
53. An efficient multicomponent synthesis of polysubstituted pyrrolidines and tetrahydropyrimidines starting directly from nitro compounds in water10.1055/s-0030-1258138 ↗