journal article·2026-06Open access

Low-temperature magnetic-field-driven thermal oscillator based on metal-superconductor joint

Poonam Rani, Yoshikazu Mizuguchi

Abstract

Thermal control is one of the important technologies for fundamental science and thermal management. Among them, thermal oscillators have been in demands in the field of materials science and device application. In general, flexible frequency, amplitude, and waveform are needed for useful thermal oscillator, and the stability of the average temperature is also highly required. However, thermal oscillators based on an AC-current-driven heater require complicated control of input power to achieve the above-mentioned flexibility and stability of the outputs. Here, we demonstrate that magnetically-driven thermal oscillators fabricated using a metal-superconductor (Cu-Pb) joint achieve those requirements easily by tuning the applied magnetic field ( H ). A DC-current-driven heater is attached on the metal (Cu) side, and the superconductor (Pb) edge is attached to thermal bath. We use a sharp and huge change in thermal conductivity at the superconducting transition of the Pb wire to generate thermal oscillation at the Cu-wire side. A sine-shaped thermal oscillation with an amplitude of 180 mK and a frequency of 0.17 Hz is observed with highly stable average temperature. Furthermore, a larger amplitude is achieved in a square-shaped oscillation with a larger H amplitude. Our thermal oscillator with temperature stability, large amplitude, and relatively high frequency will work as a flexible AC heat source at cryogenic temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Physics of Superconductivity and Magnetism · Superconducting and THz Device Technology · Superconductivity in MgB2 and Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Phononics: manipulating heat flow with electronic analogs and beyond10.1103/RevModPhys.84.1045 ↗
2. Thermal diodes, regulators, and switches: physical mechanisms and potential applications10.1063/1.5001072 ↗
3. Emerging solid–state thermal switching materials10.1002/adfm.202406667 ↗
4. Measurement of low-temperature specific heat10.1063/1.1137207 ↗
5. A review of state of the art thermal diodes and their potential applications10.1016/j.ijheatmasstransfer.2020.120607 ↗
6. Quantum computers, quantum computing, and quantum thermodynamics10.3389/frqst.2024.1422257 ↗
7. High-throughput direct measurement of magnetocaloric effect based on lock-in thermography technique10.1063/1.5000970 ↗
8. Observation of the transverse Thomson effect10.1038/s41567-025-02936-3 ↗
9. Improved AC-calorimeter for measuring the absolute value of specific heat up to 10 GPa10.1088/1742-6596/950/4/042022 ↗
10. Phase-Tunable thermal logic: computation with heat10.1103/PhysRevApplied.10.024003 ↗
11. Analysis of fluctuating heat and current density of mixed convection flow with viscosity and thermal conductivity effects along horizontal nonconducting cylinder10.1016/j.csite.2023.103023 ↗
12. Wave oscillations in thermal boundary layer of Darcy-Forchheimer nanofluid flow along buoyancy-driven porous plate under solar radiation region10.1016/j.csite.2024.103980 ↗
13. Amplitude and oscillating frequency of chemically reactive flow along inclined gravity-driven surface in the presence of thermal conductivity10.1016/j.csite.2024.104001 ↗
14. Oscillatory and non-oscillatory analysis of heat and mass transfer of Darcian MHD flow of nanofluid along inclined radiating plate with joule heating and multiple slip effects: microgravity analysis
15. Wave oscillation in periodic-boundary layers and turbulent heat flow using Powell-Eyring nanofluid, nonlinear radiation and entropy generation via finite-difference method10.1016/j.chaos.2025.116446 ↗
16. Heat switches for ADRs10.1016/j.cryogenics.2014.03.017 ↗
17. Magneto-thermal switching using superconducting metals and alloys10.1080/14686996.2025.2506978 ↗
18. Large magneto-thermal-switching ratio in superconducting Pb wires10.1063/5.0159336 ↗
19. Observation of nonvolatile magneto-thermal switching in superconductors
20. Magneto-Tunable thermal diode based on bulk superconductor
21. Thermal rectification in jointless Pb solid wire
22. Efficient phase-tunable Josephson thermal rectifier10.1063/1.4804550 ↗
23. Phase-coherent solitonic Josephson heat oscillator10.1038/s41598-018-30268-1 ↗
24. Methods for designing high-precision relaxation oscillator10.3390/mi16040364 ↗
25. Irwin, K., Hilton, G. Transition-Edge sensors. In: Enss, C. (eds) Cryogenic Particle Detection. Topics in Applied Physics, vol vol. 99. Springer, Berlin, Heidelberg. https://doi.org/10.1007/10933596_3.10.1007/10933596_3 ↗
26. Development of superconducting multilayer wiring for a 400-Pixel TES X-ray microcalorimeter array10.1109/TASC.2012.2231712 ↗