journal article·2019-06

Ultrafast fabrication of fluorescent organic nanoparticles with aggregation-induced emission feature through the microwave-assisted Biginelli reaction

Jiande Dong, Meiying Liu, Ruming Jiang, Hongye Huang, Qiang Huang, Yuanqing Wen, Jianwen Tian, Yanfeng Dai, Xiaoyong Zhang, Yen Wei

Dyes and Pigments· Volume 165
Publisher page

Abstract

Abstract Because of its unique optical properties, the aggregation-induced emission (AIE) dye has attracted extensive attention for various applications. Especially, the utilization of AIE-active dyes for fabrication of fluorescent organic nanoparticles (FONs) has attracted the most research interest for biomedical applications. Therefore, the development of novel and effective strategies to design and prepare AIE-active FONs should be of great importance for the biomedical applications of AIE-active FONs. In this report, we reported an ultrafast strategy that based on the one-pot microwave-assisted Biginelli reaction for fabrication of AIE-active poly(AA-AEMA-TPE) copolymers, which use the 2-(methacryloyoxy) ethylacet, acrylic acid (AA) and 4′,4‴-(1,2-diphenylethene-1,2-diyl) bis([1,1′-biphenyl]-4-carbaldehyde) (TPE-CHO) as the substrates. The microwave-assisted Biginelli reaction is simple, efficient and atom-economical and can be accomplished within 3 min. Owing to their amphiphilicity, poly(AA-AEMA-TPE) copolymers will self-assemble into FONs with small size and high water dispersibility. The proton nuclear magnetic resonance (1H NMR) spectroscopy, UV-Vis spectrum and fluorescence spectrometer were used to characterize the resultant copolymers. We demonstrated that poly(AA-AEMA-TPE) FONs possess many excellent properties, such as high water dispersibility, intense fluorescence, obvious AIE feature and favorable biocompatibility. The above results suggest that poly(AA-AEMA-TPE) FONs are of great potential for fluorescent imaging. Moreover, the microwave-assisted Biginelli reaction can occur under a rather benign environment with high efficiency and good substrate adaptability. Therefore, we believe that the method developed in this work could greatly advance the applications of AIE-active functional materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence and Fluorescent Materials · Polydiacetylene-based materials and applications · Molecular Sensors and Ion Detection

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Bioconjugated nanoparticles for biosensing, in-vivo imaging, and medical diagnostics10.1021/acs.analchem.6b04873 ↗
2. Multicolor core/shell‐structured upconversion fluorescent nanoparticles10.1002/adma.200990179 ↗
3. Multifunctional inorganic nanoparticles for imaging, targeting, and drug delivery10.1021/nn800072t ↗
4. Naciri · 2015
5. Surface modification of carbon nanotubes via combination of mussel inspired chemistry and chain transfer free radical polymerization10.1016/j.apsusc.2015.04.012 ↗
6. Self-polymerization of dopamine and polyethyleneimine: novel fluorescent organic nanoprobes for biological imaging applications10.1039/C4TB02067G ↗
7. Facile fabrication and cell imaging applications of aggregation induced emission dye based fluorescent organic nanoparticles10.1039/c3py00712j ↗
8. Polymerizable aggregation induced emission dye based fluorescent nanoparticles for cell imaging applications10.1039/C3PY01226C ↗
9. Fabrication of aggregation induced emission dye-based fluorescent organic nanoparticles via emulsion polymerization and their cell imaging applications10.1039/C3PY00984J ↗
10. Recent progress and development on polymeric nanomaterials for photothermal therapy: a brief overview10.1039/C6TB02249A ↗
11. Preparation of water soluble and biocompatible AIE-active fluorescent organic nanoparticles via multicomponent reaction and their biological imaging capability10.1016/j.cej.2016.09.053 ↗
12. Waggett · 2005
13. Heptamethine cyanine dyes with a large Stokes shift and strong fluorescence: a paradigm for excited-state intramolecular charge transfer10.1021/ja043413z ↗
14. Study of fluorescence quenching of mercaptosuccinic acid‐capped CdS quantum dots in the presence of some heavy metal ions and its application to Hg(II) ion determination
15. Surface modification of biodegradable polymers towards better biocompatibility and lower thrombogenicity10.1371/journal.pone.0142075 ↗
16. Changing the behavior of chromophores from aggregation-caused quenching to aggregation-induced emission: development of highly efficient light emitters in the solid state10.1002/adma.200904056 ↗
17. Aggregation-induced emission of 1-methyl-1, 2, 3, 4, 5-pentaphenylsilole10.1039/b105159h ↗
18. A novel “turn-on” fluorescence probe based on azoaniline-arylimidazole dyad for the detection of Cu2+10.1016/j.dyepig.2017.03.051 ↗
19. In vivo fluorescence imaging for Cu2+ in live mice by a new NIR fluorescent sensor10.1016/j.dyepig.2016.03.017 ↗
20. Synthesis of blue light emitting bis (triphenylethylene) derivatives: a case of aggregation-induced emission enhancement10.1016/j.dyepig.2010.09.003 ↗
21. Preparation of AIE-active fluorescent polymeric nanoparticles through a catalyst-free thiol-yne click reaction for bioimaging applications10.1016/j.msec.2017.06.008 ↗
22. Facile synthesis of AIE-active amphiphilic polymers: self-assembly and biological imaging applications10.1016/j.msec.2016.04.081 ↗
23. Photo-induced surface grafting of phosphorylcholine containing copolymers onto mesoporous silica nanoparticles for controlled drug delivery10.1016/j.msec.2017.05.107 ↗
24. The one-step acetalization reaction for construction of hyperbranched and biodegradable luminescent polymeric nanoparticles with aggregation-induced emission feature10.1016/j.msec.2017.06.019 ↗
25. Facile construction and biological imaging of cross-linked fluorescent organic nanoparticles with aggregation-induced emission feature through a catalyst-free azide-alkyne click reaction10.1016/j.dyepig.2017.09.005 ↗
26. A phenothiazine-based “naked-eye” fluorescent probe for the dual detection of Hg2+ and Cu2+: application as a solid state sensor10.1016/j.dyepig.2015.09.030 ↗
27. A novel naphthalimide-rhodamine dye: intramolecular fluorescence resonance energy transfer and ratiometric chemodosimeter for Hg2+ and Fe3+10.1016/j.dyepig.2016.09.041 ↗
28. Biocompatible fluorescent polymers from PEGylation of an aggregation-induced emission dye10.1016/j.dyepig.2016.12.070 ↗
29. Alkyl length dependent mechanofluorochromism of AIE-based phenothiazinyl fluorophenyl acrylonitrile derivatives10.1016/j.dyepig.2016.08.031 ↗
30. Indirect approach for CN− detection via Cu2+ induced turn-off sensor: using novel AIEE fluorophore with logic gate and antimicrobial application10.1016/j.dyepig.2017.08.046 ↗
31. Highly bright and photostable cyanine dye-doped silica nanoparticles for optical imaging: photophysical characterization and cell tests10.1016/j.dyepig.2009.07.004 ↗
32. Reaction-based AIEE-active conjugated polymer as fluorescent turn on probe for mercury ions with good sensing performance10.1016/j.dyepig.2018.03.060 ↗
33. Chitosan-based cross-linked fluorescent polymer containing aggregation-induced emission fluorogen for cell imaging10.1016/j.dyepig.2017.04.055 ↗
34. Fabrication of AIE-active fluorescent organic nanoparticles through one-pot supramolecular polymerization and their biological imaging10.1016/j.jtice.2017.05.024 ↗
35. A facile one-pot Mannich reaction for the construction of fluorescent polymeric nanoparticles with aggregation-induced emission feature and their biological imaging10.1016/j.msec.2017.08.048 ↗
36. Synthesis and cell imaging applications of amphiphilic AIE-active poly (amino acid) s10.1016/j.msec.2017.05.090 ↗
37. Construction of biodegradable and biocompatible AIE-active fluorescent polymeric nanoparticles by Ce (IV)/HNO 3 redox polymerization in aqueous solution10.1016/j.msec.2017.04.064 ↗
38. Recent progress and advances in redox-responsive polymers as controlled delivery nanoplatforms10.1039/C6QM00135A ↗
39. ChemInform abstract: ammonium chloride‐catalyzed one‐pot synthesis of 4(3H)‐Quinazolinones under solvent‐free conditions
40. Facile synthesis of a multifunctional copolymer via a concurrent RAFT-enzymatic system for theranostic applications10.1039/C5PY01652E ↗
41. Synthesis of amphiphilic fluorescent polymers via a one-pot combination of multicomponent Hantzsch reaction and RAFT polymerization and their cell imaging applications10.1039/C7PY00926G ↗
42. Amphiphilic fluorescent copolymers via one-pot combination of chemoenzymatic transesterification and RAFT polymerization: synthesis, self-assembly and cell imaging10.1039/C4PY01421A ↗
43. One-pot synthesis and biological imaging application of an amphiphilic fluorescent copolymer via a combination of RAFT polymerization and Schiff base reaction10.1039/C4PY01769B ↗
44. Polymer synthesis by mimicking nature's strategy: the combination of ultra-fast RAFT and the Biginelli reaction10.1039/C7PY01313B ↗
45. Fluorescent PEGylation agent by a thiolactone-based one-pot reaction: a new strategy for theranostic combinations10.1039/C4PY00995A ↗
46. From drug to adhesive: a new application of poly (dihydropyrimidin-2 (1 H)-one) s via the Biginelli polycondensation10.1039/C5PY00684H ↗
47. A new insight into the Biginelli reaction: the dawn of multicomponent click chemistry?10.1039/c3py00553d ↗
48. ChemInform abstract: unprecedented synthesis of Hantzsch 1,4‐dihydropyridines under Biginelli reaction conditions
49. ChemInform abstract: microwave-mediated Biginelli reactions revisited. On the nature of rate and yield enhancements10.1002/chin.200042043 ↗
50. Microwave-assisted multicomponent reactions for rapid synthesis of AIE-active fluorescent polymeric nanoparticles by post-polymerization method10.1016/j.msec.2017.07.006 ↗
51. Microwave-assisted Diels-Alder reaction for rapid synthesis of luminescent nanodiamond with AIE-active dyes and their biomedical applications10.1016/j.matchemphys.2017.05.041 ↗
52. Facile fabrication of organic dyed polymer nanoparticles with aggregation-induced emission using an ultrasound-assisted multicomponent reaction and their biological imaging10.1016/j.jcis.2018.01.084 ↗
53. Microwave-assisted multicomponent reactions for rapid synthesis of AIE-active fluorescent polymeric nanoparticles by post-polymerization method10.1016/j.msec.2017.07.006 ↗
54. A comparative study of cellular uptake and cytotoxicity of multi-walled carbon nanotube, graphene oxide, and nanodiamond10.1039/c2tx20006f ↗
55. Interaction of tannic acid with carbon nanotubes: enhancement of dispersibility and biocompatibility10.1039/C4TX00066H ↗
56. Cellular responses of aniline oligomers: a preliminary study10.1039/c2tx20035j ↗
57. Surfactant-dispersed nanodiamond: biocompatibility evaluation and drug delivery applications10.1039/c3tx50021g ↗
58. Chen · 2013