A porous tetraphenylethylene-based polymer for fast-response fluorescence sensing of Fe(III) ion and nitrobenzene
Source abstract
Abstract
Abstract A fluorescent porous tetraphenylethylene-based organic polymer (PTOP) was constructed by the reaction of 5,5',5'',5‴-(ethene-1,1,2,2-tetrayltetrakis(benzene-4,1-diyl))tetrakis(pyrimidin-2-amine) and cyanuric chloride in the presence of potassium carbonate. CO2 sorption experiment at 195 K reveals the permanent porosity of PTOP with a Brunauer-Emmett-Teller surface area of 227 m2 g−1. In particular, the existence of rich secondary amines and pyrimidine nitrogen atoms surrounding the 1,3,5-triazine moieties in PTOP provides abundant chelating sites for metal ions, endowing a fast-response and sensitive fluorescence sensing Fe(III) with a low limit of detection of 4.5 μM. In addition, this polymer also shows an excellent sensing performance towards nitrobenzene with good selectivity and a low detection limit of 1.6 nM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence and Fluorescent Materials · Covalent Organic Framework Applications · Metal-Organic Frameworks: Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Hierarchically porous polymers from hyper-cross-linked block polymer precursors10.1021/ja511581w ↗
2. Towards polymer-based hydrogen storage materials: engineering ultramicroporous cavities within polymers of intrinsic microporosity10.1002/anie.200504241 ↗
3. Recent advances on simulation and theory of hydrogen storage in metal-organic frameworks and covalent organic frameworks10.1039/b802430h ↗
4. Porous, covalent triazine-based frameworks prepared by ionothermal synthesis10.1002/anie.200705710 ↗
5. Conjugated microporous polymers: design, synthesis and application10.1039/c3cs60160a ↗
6. Conjugated microporous polymers10.1002/adma.200801971 ↗
7. Introduction of π-complexation into porous aromatic framework for highly selective adsorption of ethylene over ethane10.1021/ja502119z ↗
8. Targeted synthesis of a porous aromatic framework with high stability and exceptionally high surface area10.1002/anie.200904637 ↗
9. Gas storage in porous aromatic frameworks (PAFs)10.1039/c1ee01222c ↗
10. Porous polymer networks: synthesis, porosity, and applications in gas storage/separation10.1021/cm1021068 ↗
11. Metal-organic framework nanosheets in polymer composite materials for gas separation10.1038/nmat4113 ↗
12. Synthesis, properties, and gas separation studies of a robust diimide-based microporous organic polymer10.1021/cm901280w ↗
13. Rapid removal of organic micropollutants from water by a porous β-cyclodextrin polymer10.1038/nature16185 ↗
14. Photoelectric covalent organic frameworks: converting open lattices into ordered donor-acceptor heterojunctions10.1021/ja502692w ↗
15. Ion conductivity and transport by porous coordination polymers and metal-organic frameworks10.1021/ar300291s ↗
16. Metal-organic framework materials as chemical sensors10.1021/cr200324t ↗
17. Porous organic polymers in catalysis: opportunities and challenges10.1021/cs200131g ↗
18. A homochiral porous metal-organic framework for highly enantioselective heterogeneous asymmetric catalysis10.1021/ja052431t ↗
19. Aggregation-induced emission of 1-methyl-1,2,3,4,5-pentaphenylsilole10.1039/b105159h ↗
20. Aggregation-induced emission10.1039/c1cs15113d ↗
21. Aggregation-induced emission: together we shine, united we soar!10.1021/acs.chemrev.5b00263 ↗
22. A flexible microporous hydrogen-bonded organic framework for gas sorption and separation10.1021/jacs.5b05644 ↗
23. Two solvent-induced porous hydrogen-bonded organic frameworks: solvent effects on structures and functionalities10.1039/C7CC06187K ↗
24. Highly emissive covalent organic frameworks10.1021/jacs.6b02700 ↗
25. Turn-on fluorescence in tetraphenylethylene-based metal-organic frameworks: an alternative to aggregation-induced emission10.1021/ja209327q ↗
26. Tuning the luminescence of metal-organic frameworks for detection of energetic heterocyclic compounds10.1021/ja508962m ↗
27. Specific detection of D-glucose by a tetraphenylethene-based fluorescent sensor10.1021/ja107086y ↗
28. Fluorescent “light-up” bioprobes based on tetraphenylethylene derivatives with aggregation-induced emission characteristics10.1039/B608425G ↗
29. Solid-state emissive cyanostilbene based conjugated microporous polymers via cost-effective Knoevenagel polycondensation10.1039/C6PY00614K ↗
30. Fluorescein-based fluorescent porous aromatic framework for Fe3+ detection with high sensitivity10.1039/C8TC06288A ↗
31. A pillar-layered Zn-LMOF with uncoordinated carboxylic acid sites: high performance for luminescence sensing Fe3+ and TNP10.1021/acs.inorgchem.9b00204 ↗
32. Selective fluorescence sensing of p-nitroaniline and Fe3+ ions by luminescent Eu-based metal-organic framework10.1108/SR-08-2017-0153 ↗
33. A luminescent sensor based on a Zn (ii) coordination polymer for selective and sensitive detection of NACs and Fe3+ ions10.1039/C9CE00068B ↗
34. Porous covalent organic polymers as luminescent probes for highly selective sensing of Fe3+ and chloroform: functional group effects10.1016/j.snb.2015.11.108 ↗
35. Confinement of aggregation-induced emission molecular rotors in ultrathin two-dimensional porous organic nanosheets for enhanced molecular recognition10.1021/jacs.7b13069 ↗
36. A 1,2,3-triazolyl based conjugated microporous polymer for sensitive detection of p-nitroaniline and Au nanoparticle immobilization10.1039/C8PY00702K ↗
37. A tetraphenylethylene core-based 3D structure small molecular acceptor enabling efficient non-fullerene organic solar cells10.1002/adma.201404152 ↗
38. Photostable BODIPY-based molecule with simultaneous type I and type II photosensitization for selective photodynamic cancer therapy10.1039/c3tb21547d ↗
39. Pd NPs-loaded homochiral covalent organic framework for heterogeneous asymmetric catalysis10.1021/acs.chemmater.7b02131 ↗
40. Giant Zn14 molecular building block in hydrogen-bonded network with permanent porosity for gas uptake10.1021/ja410595q ↗
41. A metal-organic framework with suitable pore size and dual functionalities for highly efficient post-combustion CO2 capture10.1039/C8TA11596F ↗
42. Fine-tuning of nano-traps in a stable metal-organic framework for highly efficient removal of propyne from propylene10.1039/C8TA00598B ↗
43. A novel simple red emitter characterized with AIE plus intramolecular charge transfer effects and its application for thiol-containing amino acids detection10.1016/j.dyepig.2019.02.053 ↗
44. A self-assembly induced emission system constructed by the host–guest interaction of AIE-active building blocks10.1039/C4CC06510G ↗
45. Highly emissive platinum (II) metallacages10.1038/nchem.2201 ↗
46. A new selective chromogenic and turn-on fluorogenic probe for copper(II) in water-acetonitrile 1:1 solution10.1021/ol900050z ↗
47. New strategy for quantifying biological zinc by a modified zinpyr fluorescence sensor10.1021/ja807156b ↗
48. Highly selective “turn-on” fluorescent sensing of fluoride ion based on a conjugated polymer thin film-Fe3+ complex10.1016/j.aca.2017.02.027 ↗
49. A superamplification effect in the detection of explosives by a fluorescent hyperbranched poly (silylenephenylene) with aggregation-enhanced emission characteristics10.1039/C0PY00046A ↗
50. Novel Fe3+ fluorescence probe based on the charge-transfer (CT) molecules10.1016/j.snb.2017.08.211 ↗
51. Nickel (II) and iron (III) selective off-on-type fluorescence probes based on perylene tetracarboxylic diimide10.1039/b921342b ↗
52. Synthesis of poly (p-phenylene) containing a rhodamine 6G derivative for the detection of Fe (III) in organic and aqueous media10.1039/C7RA07853F ↗
53. A channel-structured Eu-based metal-organic framework with a zwitterionic ligand for selectively sensing Fe3+ ions10.1039/C8RA02809E ↗
54. A colorimetric Fe3+ sensor based on an anionic poly(3,4-propylenedioxythiophene) derivative10.1016/j.snb.2017.01.027 ↗
55. World Health Organization · 2017
56. Fe3+-TiO2 photocatalysts prepared by combining sol-gel method with hydrothermal treatment and their characterization10.1016/j.jphotochem.2005.10.017 ↗
57. New microporous metal-organic framework demonstrating unique selectivity for detection of high explosives and aromatic compounds10.1021/ja106851d ↗
58. Electron rich supramolecular polymers as fluorescent sensors for nitroaromatics10.1039/c3ra23269g ↗
59. Poly(arylene ynonylene) with an aggregation-enhanced emission characteristic: a fluorescent sensor for both hydrazine and explosive detection10.1039/c3ra40867a ↗
60. Silicate sol-gel stabilized silver nanoparticles for sensor applications toward mercuric ions, hydrogen peroxide and nitrobenzene10.1016/j.snb.2014.06.069 ↗
61. Palladium nanoparticles incorporated polymer-silica nanocomposite based electrochemical sensing platform for nitrobenzene detection10.1016/j.electacta.2014.09.128 ↗
62. A novel Ag(I)-calix[4]arene coordination polymer for the sensitive detection and efficient photodegradation of nitrobenzene in aqueous solution10.1039/C6DT03990A ↗
63. Three luminescent d10 metal coordination polymers assembled from a semirigid V-shaped ligand with high selective detecting of Cu2+ ion and nitrobenzene10.1016/j.jssc.2015.04.009 ↗
64. Four coordination polymers based on 1,4,8,11-tetrazacyclotetradecane-N,N’,N’’,N’’’-tetra-methylene-benzoic acid: syntheses, structures, and selective luminescence sensing of iron (III) ions, dichromate anions, and nitrobenzene10.1016/j.dyepig.2016.02.022 ↗