journal article·2024-08Open access

Alternating Cu segregation and its stabilization mechanism for coherent η' precipitates in Al–Zn–Mg–Cu alloys

Yu-ning Chiu, Tsai-fu Chung, Shao-yu Yen, Chung-yi Yu, Wei-ting Lin, Chia-chia Hsieh, Shih-kang Lin

Abstract

The 7000 series (Al–Zn–Mg) Al-alloys are renowned for their exceptional “lightweight-high strength” properties, primarily owing to nano-sized meta-stable η ′ precipitate as the main strengthening phase. However, these η ′ precipitates are susceptible to transforming into the stable η 2 phase at elevated temperatures, resulting in a decline in strength. To mitigate this, Cu-segregation has been long proposed as a promising method for stabilizing these meta-stable precipitates. However, the mechanisms involved have not been fully understood. In this study, we conducted a thorough investigation on the structural and energetic changes between Cu-free and Cu-segregated η ' and η 2 precipitates. Utilizing DFT calculations and HAADF-STEM characterizations, we uncovered a distinctive alternating Cu-segregation pattern. This pattern induces significant structural modifications within the bulk of η ' precipitates and at the precipitate-matrix interface, markedly enhancing their interfacial and bulk energetics. We believe these modifications are the key factor in improving precipitate stability. Based on our findings, the underlying mechanism of solute segregation was elucidated and a novel strategy for optimal design of Al–Zn–Mg alloys was proposed. • Unique alternating Cu-segregation pattern observed in nano-sized η ′ precipitates. • Cu-segregation triggers space group transitions, altering structure and energetics. • Strain relaxation prioritized over minimizing interfacial energy for η ′ stability. • Extended-ALSHI analysis effectively predicts optimal solute segregation. • Novel microalloying strategy for 7000 series Al-alloys contrasts with the 2000 series.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
2. Recent development in aluminium alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
3. Improvements in mechanical and stress corrosion cracking properties in Al-alloy 7075 via retrogression and reaging10.1016/j.msea.2007.08.025 ↗
4. The effect of the surface treating and high-temperature aging on the strength and SCC susceptibility of 7075 aluminum alloy10.1007/s11665-009-9562-z ↗
5. Design and development of an experimental wrought aluminum alloy for use at elevated temperatures10.1007/BF02628387 ↗
6. Warm formability and post-forming microstructure/property of high-strength AA 7075-T6 Al alloy10.1016/j.msea.2016.08.054 ↗
7. Correlation between microstructure and calorimetric behavior of aluminum-alloy 7075 and al-ZN-mg alloys in various tempers10.1016/0921-5093(89)90859-9 ↗
8. Effect of composition upon quench-sensitivity of some al-zn-mg alloys
9. Influence of Cu on microstructure and tensile properties of 7XXX series aluminum alloy10.1016/j.matdes.2014.05.003 ↗
10. Modeling the effects of Cu variations on the precipitated phases and properties of Al-Zn-Mg-Cu alloys10.1007/s11665-013-0588-x ↗
11. High-resolution characterization of the precipitation behavior of an Al-Zn-Mg-Cu alloy10.1080/09500839.2011.652682 ↗
12. The effect of Cu addition on the precipitation and redissolution in Al-Zn-Mg alloy by the differential dilatometry10.1016/j.jallcom.2009.05.082 ↗
13. Early-stage precipitation in Al-Zn-Mg-Cu alloy (7050)10.1016/j.actamat.2004.06.025 ↗
14. S.K. Maloney, I.J. Polmear, S.P. Ringer, Effects of Cu on precipitation in Al-Zn-Mg alloys, in: E.A. Starke, T.H. Sanders, W.A. Cassada (Eds.), Aluminium Alloys: Their Physical and Mechanical Properties, Pts 1-32000, pp. 1055-1060.10.4028/www.scientific.net/MSF.331-337.1055 ↗
15. The effect of copper content and degree of recrystallization on the fatigue resistance of 7XXX-type aluminum-alloys .2. Fatigue crack-propagation10.1016/0025-5416(80)90209-8 ↗
16. Effect of copper content and degree of recrystallization on the fatigue resistance of 7XXX-type aluminum-alloys .1. LOW-CYCLE corrosion fatigue10.1016/0025-5416(79)90167-8 ↗
17. The effect of Cu on mechanical and precipitation properties of AI-Zn-Mg alloys10.1016/j.jallcom.2003.11.175 ↗
18. The effects of a trace addition of silver upon elevated temperature ageing of an Al-Zn-Mg alloy10.1016/S0968-4328(00)00081-0 ↗
19. Recent progress in high-temperature resistant aluminum-based alloys: microstructural design and precipitation strategy
20. Highly stable coherent nanoprecipitates via diffusion-dominated solute uptake and interstitial ordering10.1038/s41563-022-01420-0 ↗
21. Origin of the influence of Cu or Ag micro-additions on the age hardening behavior of ultrafine-grained Al-Mg-Si alloys10.1016/j.jallcom.2017.03.250 ↗
22. Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy10.1016/j.actamat.2019.09.015 ↗
23. Trace element effects on microstructure and mechanical properties in Al-Cu-Li alloy after thermal exposure
24. Effects of cerium addition on solidification behaviour and intermetallic structure of novel Al-Cu-Li alloys10.1016/S1875-5372(16)30125-4 ↗
25. An unreported precipitate orientation relationship in Al-Zn-Mg based alloys10.1016/j.matchar.2019.109958 ↗
26. The possible transition mechanism for the meta-stable phase in the 7xxx aluminium10.1080/02670836.2020.1821323 ↗
27. Precipitation in an extruded AA7003 aluminium alloy: observations of 6xxx-type hardening phases10.1016/j.matdes.2019.108204 ↗
28. Structural studies of stacking variants in mg-base friauf-laves phases10.1107/S0567740880006565 ↗
29. The crystal structure of magnesium di-zincide10.1103/PhysRev.29.34 ↗
30. AN electron microscope investigation of microstructure in an aluminum-zinc-magnesium alloy10.1016/0001-6160(70)90016-7 ↗
31. Nature and morphology of precipitate in al-zn-mg alloys
32. Decomposition processes in al-zn-mg alloys10.1007/BF00541825 ↗
33. Decomposition processes in an AL-5-PERCENT ZN-1-PERCENT mg alloy .2. ELECTRON-MICROSCOPIC investigations
34. An atomic scale structural investigation of nanometre-sized eta precipitates in the 7050 aluminium alloy10.1016/j.actamat.2019.05.041 ↗
35. Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: atomic-scale HAADF-STEM investigation10.1016/j.msea.2017.03.032 ↗
36. Atomic scale HAADF-STEM study of eta ' and eta(1) phases in peak-aged Al-Zn-Mg alloys10.1007/s10853-017-1873-0 ↗
37. Atomic structure of hardening precipitates in an Al-Mg-Zn-Cu alloy determined by HAADF-STEM and first-principles calculations: relation to eta-MgZn210.1007/s10853-013-7158-3 ↗
38. Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy10.1016/j.actamat.2018.02.045 ↗
39. Influence of equal-channel angular pressing on precipitation in an Al-Zn-Mg-Cu alloy10.1016/j.actamat.2009.03.017 ↗
40. Segregation of alloying elements to stabilize theta ' phase interfaces in Al-Cu based alloys10.1016/j.scriptamat.2021.114006 ↗
41. First-principles/Phase-field modeling of similar to\' precipitation in Al-Cu alloys10.1016/j.actamat.2017.08.046 ↗
42. Precipitation behaviour of Al–Zn–Mg–Cu alloy and diffraction analysis from η′ precipitates in four variants10.1016/j.jallcom.2014.05.061 ↗
43. Investigation of mechanical and corrosion properties of an Al–Zn–Mg–Cu alloy under various ageing conditions and interface analysis of η′ precipitate10.1016/j.matdes.2015.06.183 ↗
44. Experimental and DFT characterization of eta ' nano-phase and its interfaces in Al-Zn-Mg-Cu alloys10.1016/j.actamat.2018.10.045 ↗
45. HREM STUDY AND STRUCTURE MODELING OF THE eta' PHASE IN AGE-HARDENING Al-Zn-Mg ALLOYS
46. Structure analysis of embedded nano-sized particles by precession electron diffraction. η′-precipitate in an Al–Zn–Mg alloy as example10.1016/j.ultramic.2006.01.009 ↗
47. Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part II: fine precipitation scenarios in AlZnMg(Cu) alloys10.1016/j.matchar.2014.11.027 ↗
48. Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part I: structure determination of the precipitates in AlZnMg(Cu) alloys10.1016/j.matchar.2014.11.028 ↗
49. Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy10.1016/j.actamat.2018.07.003 ↗
50. Li · 2005
51. Periodic segregation of solute atoms in fully coherent twin boundaries10.1126/science.1229369 ↗
52. Atomic-resolution energy dispersive X-ray spectroscopy mapping of eta precipitates in an Al-Mg-Zn-Cu alloy10.1016/j.matchar.2020.110448 ↗
53. Distinct superconducting behaviors of pressurized WB2 and ReB2 with different local B layers, Science China Physics10.1007/s11433-022-1911-x ↗
54. Molecular dynamics simulation on generalized stacking fault energies of FCC metals under preloading stress10.1088/1674-1056/24/8/088106 ↗
55. Decoupling mechanical and chemical effects on energetics of coherent nanoprecipitates with interfacial segregation10.1016/j.scriptamat.2024.116204 ↗
56. Elucidating the role of a unique step-like interfacial structure of η4 precipitates in Al-Zn-Mg alloy10.1126/sciadv.adf7426 ↗
57. Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy10.1016/j.jallcom.2023.169667 ↗
58. Effect of Ag on aging precipitation behavior and mechanical properties of aluminum alloy 707510.1016/j.msea.2020.140515 ↗
59. The direct observation of copper segregation at the broad faces of eta ' and eta precipitates in AA7010 aluminium alloy10.1016/j.matchar.2020.110232 ↗
60. Coupled segregation mechanisms of Sc, Zr and Mn at θ′ interfaces enhances the strength and thermal stability of Al-Cu alloys10.1016/j.actamat.2021.116634 ↗
61. Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation10.1016/j.msea.2019.138279 ↗
62. Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300 degrees C10.1080/21663831.2018.1546773 ↗
63. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
64. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
65. SELF-INTERACTION correction to density-functional approximations for many-electron systems10.1103/PhysRevB.23.5048 ↗
66. GROUND-STATE of the electron-gas by a stochastic method10.1103/PhysRevLett.45.566 ↗
67. Special points for brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗