journal article·2016-10

Calcination intensity on rutile white pigment production via short sulfate process

Congxue Tian

Dyes and Pigments· Volume 133
Publisher page

Abstract

Abstract The rutile titanium dioxide pigment was produced via short sulfate process from unenriched industrial titanyl sulfate solution as raw material. The effects of calcination intensity after crystal transformation on the crystal structure, particle size distribution and pigment performances were investigated. The samples were characterized by TG-DSC, XRD, SEM, particle size distribution test and pigment properties test. The crystal grain size and content for rutile pigment gradually grew as the calcination intensity increasing, with a positive linear correlation. While the blue phase index is negative linear correlation with calcination time. The optimized calcining time at 860 °C for rutile pigment production is of 40 min, corresponding calcination intensity of 1,34,277 K min, and the as-prepared rutile pigment is with the grain size of 110.8 nm, rutile content of 98.3%, suitable and narrow particle size distribution, and the best pigment performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pigment Synthesis and Properties · TiO2 Photocatalysis and Solar Cells · Dyeing and Modifying Textile Fibers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Tioxide Group Limited · 1992
2. Dabrowski · 2001
3. Guez · 2000
4. Modified titanium white covered by Al2O3 and SiO2 - characteristics and application in acrylic paints10.1108/03699420210442329 ↗
5. Tanaka · 2006
6. Kinetics of titanium dioxide precipitation by thermal hydrolysis10.1016/0021-9797(86)90005-6 ↗
7. Studies on the hydrolysis process of titanium sulfate compounds
8. Influence of stirrer speed on the precipitation of anatase particles from titanyl sulphate solution10.1016/S0022-0248(01)00619-4 ↗
9. Hydrolysis of titanium sulphate compounds
10. Characterization of chemical speciation of titanyl sulfate solutions for production of titanium dioxide precipitates10.1021/ic801722r ↗
11. Heat of immersion of titanium dioxide in water. II. The effect of the crystallinity of anatase10.1246/bcsj.42.2198 ↗
12. Multicomponent equilibrium calculations in process design: study of some acid digester reactors
13. Kinetics and mechanism of the anatase/rutile transformation, as catalyzed by ferric oxide and reducing conditions
14. Thermochemical characterisation of the calcination process step in the sulphate method for production of titanium dioxide10.1016/j.cherd.2010.11.006 ↗
15. Dynamic modeling of a rotary kiln for calcination of titanium dioxide white pigment10.1016/j.compchemeng.2011.03.029 ↗
16. Effect of calcination temperature on porous titania prepared from industrial titanyl sulfate solution10.1016/j.apsusc.2011.04.061 ↗
17. Effects of calcining temperature on photocatalytic activity of Fe-doped sulfated titania10.1111/j.1751-1097.2012.01157.x ↗
18. West · 1986 · 174
19. Understanding polymorphic phase transformation behavior during growth of nanocrystalline aggregates: insights from TiO210.1021/jp000499j ↗
20. Doping of TiO2 pigments by Al3+10.1016/S0167-2738(97)00443-8 ↗